Search results for 'vw'

REQUIRES AFTERMARKET INTAKE

Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes. 
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.

TURBO INLET PIPE FEATURES

• Greatly improves air-flow to turbocharger
• Constant high-flow inner diameter
• Easy install, no modifications necessary
• Long life cast aluminum alloy
• In-house CNC machined for perfect fitment
• No leak o ring seal to turbocharger 
• Outflows stock inlet by 110CFM

IS YOUR STOCK INLET ROBBING POWER?

The factory installed plastic turbo inlet found installed on your VW or Audi Gen 3 1.8T or 2.0T TSI engine is adequate enough for stock cars with factory hardware and ECU calibrations. However, the necked down design becomes a major flow restriction when ran with power upgrades such as cold air intakes, intercoolers, downpipes, and ECU upgrades. 

UPGRADE YOUR TURBO INLET PIPE

The IE Turbo Inlet Pipe helps you to get the most out of your IS38 or IS20 turbo and power upgrades by removing the factory flow restriction. The cast aluminum design allows for a constant diameter elbow increasing efficiency from the intake to the turbo without the bottleneck design of the factory unit.

HORSEPOWER RESULTS

Dyno graph tested on a 2019 GTI with Stage 2 hardware & software on 93 octane

EASY INSTALLATION

Your new turbo inlet pipe has been in-house CNC machined and includes all required hardware to allow for a perfect and easy installation. View and download the install guide here (coming soon).

REQUIRES AFTERMARKET INTAKE

Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes. 
Does not work with the DV+ Diverter Valve or Diverter Valve spacers. 

VEHICLE APPLICATIONS

• Audi - A3 2015+ 8V 1.8T & 2.0T engines
• Audi - S3 2015+ 8V 2.0T engine
• Audi - TT 2016+ 8S 2.0T engine
• Audi - TTS 2016+ 8S 2.0T engine
• VW - Golf R 2015+ MK7 2.0T engine
• VW - GTI 2015+ MK7 2.0T engine
• VW - Golf/Alltrak 2015+ MK7 1.8T & 2.0T
• VW - Passat 2013+ B8 1.8T & 2.0T (EA888 Gen 3) engines
• VW - Tiguan 5N 2017+ 2.0T (EA888 Gen 3) engine

H&R Sport Sway Bars are crafted from a special 50CRV4 steel alloy, the highest tensile strength available.

The quality of the material and design guarantees smooth transitional sway bar function, decreasing feedback response time and increasing stiffness over stock.

H&R Sport Sway Bars improve lateral stability and cornering grip, while reducing body roll. H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase stiffness and reduce body roll while maintaining comfort and increasing cornering control, lateral stability, and grip. 

A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness.

Being 100% German made means a commitment to doing it right and giving you the best quality product.

Features:
- Reduces body roll
- Highest tensile strength available
- Works with DCC (adaptive suspension)

- Special urethane/Teflon composite bushes that are maintenance free

Swaybar Size:
- Front 24mm

- Rear 26mm

Adjustable:
- Front x2
- Rear x2

Compatibility:

• Audi A3 8P 2003-2012 4WD
• Audi S3 8P 2003-2012 4WD
• Skoda SUPERB 3T SEDAN 4WD
• Skoda OCTAVIA 1Z SEDAN + WAGON 4WD
• VW GOLF MK5 2003-2008 4WD
• VW GOLF MK6 2008-2012 4WD
• VW PASSAT B6/B7 2005-2014 4WD
• VW Tiguan 5N 2007-2015 4WD

H&R Lowering Springs - VW UP 11/11 and VW UP Facelift eUP (2016+)

Drop Front: 35mm
Drop Rear: 35mm

LEADING FEATURES

• Required for IE TrueFlex MQB tunes
• Allows for instant adjustments from 91 pump to full E85
• Harness for VW MK7 & Audi 8V EA888.3 engines
• Sends sensor data in real-time to IE ECU calibrations
• Includes everything needed to install

OVERVIEW

This plug and play harness kit is required for IE TrueFlex ECU Tunes for VW and Audi MQB Gen 3 engines. This includes everything necessary for the flex-fuel sensor to send real-time data from your fuel system to the ECU and adjust for any content mix from 91 pump to full E85 automatically.

Kit includes:

• (1x) IE TrueFlex Wiring Harness
• (1x) 2 amp Fuse
• (1x) Ethanol Sensor
• (2x) Ethanol Sensor Quick Connect Couplers
• (2x) Hose Clamps

INSTALLATION

This harness kit is fully assembled to proper lengths and includes everything needed to install in a clean and factory-like install. Disconnecting and cutting of factory soft fuel lines is required and should be completed with great care or by a professional.

TrueFlex is currently available for 2015-2018 MK7 GTI & A3 2.0T W/IS38. Stage 1 & 2, Golf R/S3, and 2019+ model years are coming soon!

P3 Cars V3 OBD Vent Gauge to suit VW MK8 Golf R. P3 Digital gauges provide the highest level of OEM integration and colour matching to suit your vehicle.

Increased cornering capability & reduced body roll for your Audi A3 8V or VW Golf Mk7 FWD Sway bar rates can increased by 30-50% over OE

Increased cornering capability & reduced body roll for your Audi A3 8V or VW Golf Mk7 FWD Sway bar rates can increased by 30-50% over OE

Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI

MK7 & MK7.5 MQB GOLF R / S3 TUNE FEATURES Stage 1 & Stage 2 files available to match any level of bolt-on parts Horsepower & torque gains maximized on stock engine & turbo Switch between 91, 93, & 104 octanes at no extra cost Stock boost control optimized for a smooth driving experience Rev limiter increased to 7100 RPM in manual mode or with DSG flash Quick and easy to tune your car at home Launch control boost pressure increased for faster starts (DSG) Increased rev limiters (transmission stock shift points remain) Road speed limiters removed All engine safety protocols remain for reliability and long engine life POWERlink allows file and octane switching in less than 2 minutes Engineered for all climates and elevations Simple data logging for diagnosis purposes Flash back to stock at any time HOW TO IE TUNE YOUR 2.0T (IS38) IE ECU Stages for your VW Golf R or Audi S3 2.0T IS38 Turbo (MQB) engine is available for stock engines or with modified hardware for Stage 2. Read below to determine the best stage for your build! In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost. Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your MK7 R or 8V S3 in a matter of minutes! WHAT DOES THE AUDI 2.0T ECU TUNE DO? Adding an IE Performance ECU Tune to your Golf R packs a serious punch both in performance gains and in additional features resulting in extremely competitive power that will give you the edge on the street or track. IE’s in-house calibration engineers have taken several steps to ensure you a smooth and safe operation by maintaining factory safety limits, or “fail safes”, resulting in reliability. As a final step, the software has been calibrated in test environments that ensure smooth operation in all types of climates and elevations. AVAILABLE MK7/8V IS38 TUNES Stage 1 is precisely calibrated to make the most of your stock hardware. Power gains are delivered smoothly across the entire powerband and many performance features have been added. Enthusiasts will have the choice between 91 & 93 fuel octanes and the ability to flash back to stock within minutes. As another added benefit, your IE Stage 1 Tune has been designed to adapt to minor bolt-on modifications, such as an intercooler or intake. Low torque and high torque files are available. Stage 1 Low Torque recommended hardware -IE Cold Air Intake (recommended) Stage 1 High Torque required & recommended hardware -IE DSG Transmission Tune (required) -IE Cold Air Intake (recommended) Ready to release every last ounce of power from your stock turbo 2.0T engine? The Stage 2 ECU tune takes full advantage of performance bolt-ons including downpipe, intake, and intercooler. You can install this setup in a single weekend and transform your Golf R or S3 into a true AWD monster with 432HP and 467TQ! Easily switch between free octane tunes whenever you want to add more power with your choice of 91, 93, or 104 octane files. Load Stage 2 and get ready to experience the true power monster that has been hiding under the hood of your MK7 Golf R or 8V S3. Stage 2 required & recommended hardware -IE Performance Downpipe (required) -IE DSG Transmission Tune (required) -IE Intercooler (highly recommended) -IE Cold Air Intake (highly recommended) AVAILABLE OCTANES All available tune stages include various octanes at no extra cost. Using the IE POWERlink cable you can switch between octanes as needed. You can load high octane files for race day and run regular pump octane on your daily commute and save at the pump. STAGE 1 OCTANES: Pump 95 Pump 98 STAGE 2 OCTANES: Pump 95 Pump 98 Race Fuel 108 EASY INSTALLATION – TUNE FROM HOME IE’s own in-house developed POWERlink cable gives you the control to unlock your engine’s true potential from your own garage or driveway. Enjoy the freedom to quickly reflash your car’s engine control unit (ECU) or transmission control unit (TCU) with IE’s line of performance tunes. The cable simply plugs into your vehicle’s OBD-2 port delivering instant access to choose different IE Tune stages to match installed hardware, take advantage of different fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.