ADD POWER, TORQUE, AND SOUND

The massive 5” velocity stack and ram-air designed IE Cold Air Intake Kit delivers the most air and horsepower possible. Quickly add horsepower, torque, and aggressive engine and turbo sound to your VW or Audi 2.0T TSI (Gen1/2) engine. 

LEADING FEATURES

• INCREASED HORSEPOWER & TORQUE
• ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND
• HIGH-FLOW BELLMOUTH
• MASSIVE OVER-SIZED AIR FILTER
• BLACK POWDER COAT FINISH
• EASY INSTALL WITH NO MODIFICATIONS
• USES FACTORY MOUNTING GROMMETS & HARDWARE
• HEAT SHIELDING & DIRECTED AIR FLOW
• REINFORCED SILICONE HOSES
• FITS DSG AND MANUAL TRANSMISSIONS

YOUR BUILD DESERVES THE BEST

Feed your 2.0T TSI GTI, Jetta, GLI, CC, or A3 with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5" bellmouth. Our high-flow bellmouth is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.

STOCK-LIKE DIRECT FIT

This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.

HIGH-FLOW VELOCITY STACK

The air intake utilizes a high-flow bellmouth behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry about the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!

THERMAL BLOCKING HEAT SHIELD

The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.

DO YOU NEED AN SAI KIT?

The MK5/MK6 2.0T TSI engine has two different engine codes. CBFA engine codes are equipped from the factory with a secondary air injection (SAI) pump that connects to the factory intake box. These engines require a small breather filter for this SAI line when installing an aftermarket intake. CCTA engine codes do not have this SAI pump and will not require this filter. Identify your engine code using the photos below, and add an SAI filter kit above if needed when ordering your intake.

EASY INSTALLATION

Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.

CLICK HERE to view and download the Cold Air Intake install guide

VW MK7/MK7.5 & AUDI 8V 2018+ DSG TUNE Don't short shift your ECU tune and performance parts, get the most out of your modifications with the IE DSG Transmission tune for 2019+ GLI, GTI, Golf R, A3, S3 2.0T. Instantly gain increased power, higher RPM limit, faster shifts, optimized shift points, and a true performance tuned transmission. Acceleration times will greatly improve transforming your 2.0T into a fully rounded performance monster. DSG TUNE FEATURES Required for high torque IE ECU tunes Lightning fast gear shifts Kick down in manual mode eliminated Lag time reduced when starting off in first gear Drive shift mapping entirely reworked with an enthusiast in mind Flashed directly through OBD-II Port (No TCU removal required) Increased clutch pressure on tap for higher torque without slip Temperature protection remains for safety Gear hunting reduced Gearbox “Torque Limiters” removed REQUIRED FOR SELECT ECU TUNES Required for GLI, GTI, Golf R, A3, & S3 Stage 1 high torque and all Stage 2 tune files, your new transmission tune will no longer lug the engine in drive mode, or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. To get the most out of your tune investment, a lot of features have been added to make a fully rounded performance vehicle with more aggressive launches, faster shifting, higher RPM, and optimized shift points. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. ALL INCLUSIVE DSG FILE, NO STAGES That's right, your IE DSG tune is all-inclusive and does not offer expensive "Stage" upgrades. All features for any ECU stage are included in the tune and will never require unnecessary upgrade charges. IE POWERlink DIRECT PORT FLASH TOOL IE's POWERlink direct port flash tool is required to flash your ECU (engine control unit) or TCU (transmission control unit) and is available separately. The POWERlink tool is sold with all new IE ECU tunes and can also be used to flash your new DSG tune. If you already own an IE POWERlink unit, purchasing this file will add the credits to your cable within one working day. If you do not own a POWERlink cable, please chose to add one in the drop-down menu above. POWERlink FEATURES: FILE SWITCHING The POWERLink cable allows for map switching without making a trip back to an IE Software dealer. EASY OPERATION Simply plug your IE PowerLink cable into your vehicle’s OBD-II port and the USB port on your Windows-powered laptop to use the included IE Flash Wizard software. The flash wizard will then walk you through the installation steps. FLASH MULTIPLE CARS Have a friend with a compatible VW or Audi? Share the power with up to 5 different cars with a single cable. Just add enough credits to your cable for the desired tune and power-up your entire crew. RETURN TO STOCK ANYTIME With the IE PowerLink, you can return your vehicle back to original ECU or TCU programming at any time. EASY UPDATES IE will always provide free software updates as they become available and easily reflashed through your IE PowerLink cable. SYSTEM REQUIREMENTS Laptop or tablet with Wifi connection and USB port running Windows 7 or newer operating system required. Powered by 32 or 64-bit processor with 1.0GHz or greater and 4GB of Ram. Windows NT not supported. IE DSG TUNE TECHNICAL FEATURES HIGHER SHIFT POINTS Utilize the whole powerband of your turbocharged Gen 3 TSI with IS20 Turbo engine without the DSG interfering and shifting early. DRIVE MAPPING REWORKED The MQB 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode. INCREASED CLUTCH PRESSURE Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive. FLASHED THROUGH OBD-II PORT There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes. TAKE-OFF LAG REDUCED The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop. KICK DOWN REMOVED IN MANUAL MODE The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain FLAWLESS OPERATION WITH IE ECU TUNES The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI Gen 3 engine and transmission. VEHICLE FITMENT VW - GTI 2019+ (MK7.5) W/DSG TRANSMISSION VW - GLI 2019+ (MK7) W/DSG TRANSMISSION VW - GOlf R 2018+ (MK7.5) W/DSG TRANSMISSION AUDI - A3 2019+ (8V) W/ DSG TRANSMISSION AUDI - S3 2018+ (8V) W/ DSG TRANSMISSION

 • 76mm (3 inch) tubing replaces restrictive 60mm factory tubing

 • Bolt on fitment - no hassle or poorly fitting parts when you choose IE

 • Constructed of 304 stainless long-lasting and high-quality material

 • Thick turbo flange - prevents leaks and warping

 • High flow 200 cell catalytic converter - full power with reduced pollution and smell

 • OEM style flex section - allows for more adjustment and won’t fail

 • All inclusive kit - downpipe, midpipes, all hardware

 • TIG welded construction - equates to long lasting welds that are less likely to fail

SHIFT FASTER, DRIVE FASTER The IE DSG Tune for your Audi B8/B8.5 S4/S5 3.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 3.0T into a fully rounded performance monster. LEADING FEATURES Lightning fast gear shifts Higher shift points of 7200 RPM Multiple launch RPMs: 3400, 3600, 3800, 4000 Drive shift mapping entirely reworked with an enthusiast in mind Flashed directly through OBD-II Port (No TCU removal required) Works flawlessly with all IE ECU Tunes Unlimited launches (factory defaults to 200) Increased clutch pressure on tap for higher torque without slip Temperature protection remains for safety Gear hunting reduced Gearbox “Torque Limiters” removed WHAT DOES A DSG TRANSMISSION TUNE DO? IE’s Audi S4 (DL501 S-Tronic) DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features and upgrades are included at one low cost. A great deal of sportiness is added to the tune while maintaining factory smoothness and driveability that you love about the S4. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve dramatically from a larger useable powerband provided by the higher shift points. REQUIRED FOR SELECT ECU TUNES Required for S4 & S5 Stage 2 dual pulley files, your new transmission tune will no longer lug the engine in drive mode or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. ONE TUNE FOR ALL STAGES IE’s DSG tunes are all-inclusive without any expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset for any level of hardware or ECU Tune Stage, one cost and you are covered for all and any future upgrades from Stage 1 to Stage 2 billion. USER ADJUSTABLE LAUNCH CONTROL The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! Available Launch Control RPMs: 3400 RPM 3600 RPM 3800 RPM 4000 RPM *Some early model B8 DSG TCUs cannot have launch control added to them, as well as some replacement Mechatronics units. Non compatible TCU codes include, but may not be limited to 8K1927156AC and 8K1927156AD. You can use your IE Powerlink tool to check your TCU code. Other DSG tune features will function normally. IE DSG TUNE TECHNICAL FEATURES HIGHER SHIFT POINTS Utilize the whole powerband of your supercharged 3.0T engine without the DSG interfering and shifting early. DRIVE MAPPING REWORKED The B8 and B8.5 S4 is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode. INCREASED CLUTCH PRESSURE Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive. FLASHED THROUGH OBD-II PORT There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes. TAKE-OFF LAG REDUCED The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop. MULTIPLE LAUNCH RPMS The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! FLAWLESS OPERATION WITH IE ECU TUNES The IE DSG Tune and ECU Tunes were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 3.0T engine and transmission. Perfect for all IE Tunes from Stage 1 to dual pulley and throttle upgrades. VEHICLE FITMENT Audi - S4 2008-2016 (B8 & B8.5) 3.0T supercharged engines* Audi - S5 Coupe 2013-2016 (B8.5) 3.0T* Audi - S5 Cabriolet 2009-2016 (B8-B8.5) 3.0T* *IE DSG tunes are available only for vehicles equipped with Audi's 7-speed S-Tronic transmissions. Does not function with manual 6-speed transmission cars.

PRODUCT FEATURES

• Eliminates excessive play from OE rubber bushings
• Greatly Reduces chances of missed shifts
• CNC machined in-house for precise fitment
• Bronze inner bushing to provide smooth pivoting without wear

PRODUCT DETAILS

Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!

Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.

FITMENT

• VW - Golf R 2012-2012 (MK6) 6 speed transmisison
• VW - GTI 2009 (MK5) 6 speed transmisison
• VW - GTI 2010-2014 (MK6) 6 speed transmisison
• VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
• VW - Jetta 2008-2009 (MK5) 5 speed transmisison
• VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
• VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
• VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison

AUDI B9 2.0T TUNE FEATURES

HOW TO TUNE YOUR B9 A4 or A5

IE ECU Stages for your Audi B9 engine are available for stock (Stage 1) or with modified hardware for Stage 2. Read below to determine the best stage for your build!

In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.

Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your Audi in a matter of minutes!

WHAT DOES THE IE AUDI B9 ECU TUNE DO?

Your ECU (Engine Control Module) is a computer loaded with maps to control the operating conditions of your Audi 2.0T engine. The factory calibration is designed to function with stock installed hardware, meet new car regulated standards, and de-powered to not compete with higher performance models. IE's motorsport recalibration brings your engine to life by unleashing its full performance potential on stock hardware or to match your installed hardware upgrades while maintaining reliability and factory-like comfort. This is how your turbocharged Audi should have felt from the factory!

 

VEHICLE FITMENT

• Audi - B9 A4 Quattro 2016+ with 2.0T engine*
• Audi - B9 A5 Quattro 2016+ with 2.0T engine*
• Audi - B9 A4 Quattro Allroad 2017+ with 2.0T engine*

*For all wheel drive (Quattro) vehicles only, does not support front wheel drive engines at this time.

MK7 & MK7.5 MQB GOLF R / S3 TUNE FEATURES Stage 1 & Stage 2 files available to match any level of bolt-on parts Horsepower & torque gains maximized on stock engine & turbo Switch between 91, 93, & 104 octanes at no extra cost Stock boost control optimized for a smooth driving experience Rev limiter increased to 7100 RPM in manual mode or with DSG flash Quick and easy to tune your car at home Launch control boost pressure increased for faster starts (DSG) Increased rev limiters (transmission stock shift points remain) Road speed limiters removed All engine safety protocols remain for reliability and long engine life POWERlink allows file and octane switching in less than 2 minutes Engineered for all climates and elevations Simple data logging for diagnosis purposes Flash back to stock at any time HOW TO IE TUNE YOUR 2.0T (IS38) IE ECU Stages for your VW Golf R or Audi S3 2.0T IS38 Turbo (MQB) engine is available for stock engines or with modified hardware for Stage 2. Read below to determine the best stage for your build! In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost. Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your MK7 R or 8V S3 in a matter of minutes! WHAT DOES THE AUDI 2.0T ECU TUNE DO? Adding an IE Performance ECU Tune to your Golf R packs a serious punch both in performance gains and in additional features resulting in extremely competitive power that will give you the edge on the street or track. IE’s in-house calibration engineers have taken several steps to ensure you a smooth and safe operation by maintaining factory safety limits, or “fail safes”, resulting in reliability. As a final step, the software has been calibrated in test environments that ensure smooth operation in all types of climates and elevations. AVAILABLE MK7/8V IS38 TUNES Stage 1 is precisely calibrated to make the most of your stock hardware. Power gains are delivered smoothly across the entire powerband and many performance features have been added. Enthusiasts will have the choice between 91 & 93 fuel octanes and the ability to flash back to stock within minutes. As another added benefit, your IE Stage 1 Tune has been designed to adapt to minor bolt-on modifications, such as an intercooler or intake. Low torque and high torque files are available. Stage 1 Low Torque recommended hardware -IE Cold Air Intake (recommended) Stage 1 High Torque required & recommended hardware -IE DSG Transmission Tune (required) -IE Cold Air Intake (recommended) Ready to release every last ounce of power from your stock turbo 2.0T engine? The Stage 2 ECU tune takes full advantage of performance bolt-ons including downpipe, intake, and intercooler. You can install this setup in a single weekend and transform your Golf R or S3 into a true AWD monster with 432HP and 467TQ! Easily switch between free octane tunes whenever you want to add more power with your choice of 91, 93, or 104 octane files. Load Stage 2 and get ready to experience the true power monster that has been hiding under the hood of your MK7 Golf R or 8V S3. Stage 2 required & recommended hardware -IE Performance Downpipe (required) -IE DSG Transmission Tune (required) -IE Intercooler (highly recommended) -IE Cold Air Intake (highly recommended) AVAILABLE OCTANES All available tune stages include various octanes at no extra cost. Using the IE POWERlink cable you can switch between octanes as needed. You can load high octane files for race day and run regular pump octane on your daily commute and save at the pump. STAGE 1 OCTANES: Pump 95 Pump 98 STAGE 2 OCTANES: Pump 95 Pump 98 Race Fuel 108 EASY INSTALLATION – TUNE FROM HOME IE’s own in-house developed POWERlink cable gives you the control to unlock your engine’s true potential from your own garage or driveway. Enjoy the freedom to quickly reflash your car’s engine control unit (ECU) or transmission control unit (TCU) with IE’s line of performance tunes. The cable simply plugs into your vehicle’s OBD-2 port delivering instant access to choose different IE Tune stages to match installed hardware, take advantage of different fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.