Search results for 'info'
Sale
Product Description:
Eibach’s Pro-Kit Lowering Springs (E10-85-051-05-22) are an essential upgrade component to your vehicles suspension & chassis setup. Please carefully check compatibility, any pre-requisites for suspension setups (including front & rear axle load and electronic dampening setups). Motorsport has always been one of Eibach’s core competencies and the testing ground for numerous innovations. Eibach’s passion for precision is what racing enthusiasts worldwide appreciate.
Technical Information
Eibach Part: E10-85-051-05-22
Range: Pro-Kit
Front Lowering: 15-20mm (Max front axle load: 1070kg)
Rear Lowering: 10mm (Max rear axle load: 930kg)
Axle: Multi-Link Axle, for all standard damping systems
Regular Price:
$580.00
Special Price
$522.00
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
- OEM Integration - installs in your vent for a sleek install while retaining air flow
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
OEM Vent Option
- We install the display in an OEM vent to make your install even easier
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Sale
DESCRIPTION
CTS Turbo is proud to release our B-Cool Billet 3.0T Oil Filter Housing. The OE plastic filter housing is quite fragile and is know to become brittle and crack over time. Each CTS Turbo B-Cool Billet 3.0T Oil Filter Housing is constructed in house from T6061 Aluminum. Not only does the B-Cool filter look good, but it works great. We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil. Installation is very straight forward and only required basic hand tools.
Product Details:
- Made in Canada from billet T6061 Aluminum
- Hard anodized black for stealth and longevity
- Uses OEM O-ring
- OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
- Installation of CTS-HW-0243 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
- Compatible with OEM Filter
The CTS B-Cool Billet 3.0T Oil Filter Housing fits Audi 3.0T equipped models such as B8 & B8.5 S4, A6 etc.
ADDITIONAL INFORMATION
Weight |
2 lbs |
Dimensions |
6 × 6 × 6 in |
Model
Generation
Make | Model | Year | Generation |
AUDI |
A6 |
2005 - 2011 |
C6 |
AUDI |
A6 |
2012 - 2017 |
C7 |
AUDI |
A7 |
2012 - 2017 |
C7 |
AUDI |
S4 |
2010 - 2016 |
B8/8.5 |
AUDI |
S5 |
2008 - 2017 |
B8/8.5 |
Regular Price:
$129.00
Special Price
$99.00
Sale
P3 Cars V3 OBD Vent Gauge to suit VW MK8 Golf R. P3 Digital gauges provide the highest level of OEM integration and colour matching to suit your vehicle.
Regular Price:
$689.00
Special Price
$550.00
Sale
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open?
- OEM Integration - installs the dash and cluster trim for a sleek install
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Engine oil temperature (GTI and Golf R)
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Regular Price:
$689.00
Special Price
$550.00
Sale
Description:
Set your vehicle's interior apart by installing the Leyo Motorsport’s multimedia ring kit. Constructed with elegance in mind, the research and development team at Leyo Motorsport wanted to set the interior of the Volkswagen apart with the simplest in clean & elegant design. We’ve created a stunning hard anodized coated aluminium surround that compliments your vehicle's interior. Matching the OEM chrome on the dash surrounding tachometer and speedometer, the durable aluminium entertainment surround will be sure to make your interior feel exclusive.
Don’t wait, as these entertainment surrounds is one of our hottest products and stock is running low!
Specifications:
-
Add that sophisticated touch to your vehicle's interior.
-
Solid construction for easy fitment and stunning looks.
-
All aluminium maintaining the lightweight and nimble race experience.
COMPATIBLE VEHICLES
Available for all vehicle only if control panel looks like these.
PLEASE NOTE
If your control panel is touchscreen infotainment sets, only for the 3pcs knobs set. The 2 smaller radio knobs doesn't fit.
Regular Price:
$98.99
Special Price
$79.19
Preorder Special
I30N300: $25 AUD off preorders over $300 AUD
I30N600: $50 AUD off preorders over $600 AUD
I30N1000: $100 AUD off preorders over $1,000 AUD
Limited to the first 15 customers and ends 7 December 2019. Please note all preorders made will be manufactured and shipped after this date.
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
The i30N front lip splitter will include a pair of stainless steel reinforcement brackets enhancing the overall strength of the splitter.
Details
Our i30N Hatch (PD) body kit splitter set includes a front lip splitter, side skirt splitters, Flow-Lock rear diffuser, rear pods/spats & our full accessories range (winglets & extensions). With easy to follow installation instructions, these extremely durable lip splitters will complete your i30N with a more aggressive look & feel.
All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
Brass threads located on each side will for easy installation of our adjustable front winglets and front extensions, creating your own style with our bolt-on accessories range (sold separately).
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Kit Includes
i30N Hatch PD front lip splitter
Pre-mounted adjustable Aerospacers
Reinforcement brackets (pair)
2 Flow Designs stickers
Fitting kit
Material
10mm thick polyethylene composite, bevelled edges
Finish
Hand polished satin black
FAQ
Why do you use polyethylene composite for your products?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!)
How is your splitter so strong?
The splitter becomes an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper.
Pre-assembled Aerospacers are bolted down perpendicularly to create a brace that reinforces the splitter and evenly spreads the load from impacts across the surface. It also allows the front lip splitter to follow the body kit contour to keep it flat and level.
What about carbon fibre?
As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable.
Details:
Why is our splitter so strong?
Our secret is in the cross bar studs. 4 stainless steel studs matched with coupling nuts are bolted directly into the lower OEM crossbar. This allows the splitter to attach directly onto a solid metal section of the vehicle whilst also supporting the front bumper.
When installed correctly, the studs reinforces the splitter from the inside, making this splitter an integral part of the vehicle. This achieves higher tensile load giving it unrivalled rigidity and strength taking on scrapes whilst protecting your bumper. Provisions for transmission and brake cooling have also been taken into consideration.
Pre-assembled aerospacers are bolted down perpendicularly to create a brace that reinforces the splitter and spreads the load from impacts as evenly across the surface, it also allows the splitter to follow the contour of the bumper keeping it flat and level.
Not including the hardware that holds all the components together the splitter alone is made up of 5 induvial parts, all designed and developed in Melbourne.
By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept all our add-on accessories for the MK7.5 R such as winglets and splitter extensions.
KIT INCLUDES:
- Splitter
- Pre-mounted Adjustable Aero Spacers
- Pre-installed brass thread to accept bolt-on accessories
- 2 Flow Designs Stickers
- Fitting kit
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
MATERIAL:
- 10mm thick polyethylene composite, bevelled edges
FINISH:
- Hand polished satin black
Volkswagen MK7.5 Golf GTI Front Splitter & Aerospacers
Details:
The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept all our add-on accessories for the MK7.5 GTI such as winglets and splitter extensions.
Accessories not included
Volkswagen MK7.5 Golf GTI Front Winglets (Pair)
Volkswagen MK7.5 Golf GTI Adjustable Front Extensions (Pair)
Kit Includes:
Front splitter with pre-pressed in threaded brass inserts
Cross bar drilling template (for stud installation)
Pre-mounted adjustable Aerospacers
2 Flow Designs stickers
Fitting kit
We've developed additional reinforcement studs that bolts the bumper and splitter to the metal OEM cross bar. This achieves better tensile load and downforce whilst reinforcing the bumper. Provisions for transmission and brake cooling have also been taken into consideration.
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
Material:
Front Splitter: 10mm thick polyethylene composite
Finish:
Hand polished satin black
Bevelled edges
Fits Models:
VW MK7.5 Golf GTI 3 Door
VW MK7.5 Golf GTI 5 Door
VW MK7.5 Golf R 3 Door
VW MK7.5 Golf R 5 Door
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Package price for this set includes:
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
Please note you are receiving a special price when you purchase the Hyundai i30N Hatch PD complete body kit splitter set.
DETAILS
The i30N PD Hatch body kit splitter set includes front lip splitter, side skirt splitters, Flow-Lock rear diffuser, rear pods/spats and our full accessories range of front extensions and winglets all round. Easy installation instructions are included and the i30N range does not require bumper removal. We guarantee our i30N body kit splitter set is the most durable on the market and will complete your exterior aesthetic by giving it a more aggressive look.
The i30N body kit range shares the same durability and technology as our renowned WRX, Golf GTI and R and Focus RS line up which is trusted by car enthusiasts worldwide.
All our splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
KIT INCLUDES
- i30N front lip splitter & Aerospacers
- i30N front splitter reinforcement brackets (pair)
- i30N side skirt splitters (select one or two pairs)
- i30N Flow-Lock rear diffuser & Aerospacers
- i30N rear lip spats/pods & Aerospacers (pair)
- i30N adjustable front extensions (pair)
- i30N adjustable front winglets (pair)
- i30N adjustable side winglets (pair)
- i30N adjustable rear winglets (pair)
- 2 Flow Designs stickers
- Fitting kit
MATERIAL
- Front lip splitter, side skirt splitters, valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
FINISH
- Hand polished satin black
- Flow-Lock diffuser fins: scratch resistant textured ABS plastic
- CNC engraved logo and features
Regular Price:
$1,505.00
Special Price
$1,430.00