COSMETIC
Supernova - VW Scirocco Sequential Mirror LEDs (Pair)
No Coding, Direct Install
Get a unique sweeping / dynamic / sequential LED appearance by simply upgrading the LED module on your VW Scirocco with our dynamic variant.
Made specifically for the VW Scirocco, incorporating the same socket as OEM for easy install, no further coding or modification needed.- Plug N Play – no coding needed
- Easy 10 min install
- No coding needed
- All Tools Included
FITS
- VW Scirocco
- Does not fit VW Golf Mk6 or VW Golf MK5 models 2003-2008 R32/GTI/GT/TSI/TDI
Regular Price: $119.00
Special Price $109.00
Hyundai i30(n) - High Output Remnant Reverse LED (Pair)
Description New Remnant Series - Only the brightest Remnant series is reserved for only the highest output LEDs. To date, no COB leds, 5050SMD or fake cree LEDs have made the cut. We didn't need to reinvent the wheel to create the ultimate i30n Reverse LED. The design focus is to have the highest output LED, be CANBUS error free, have a solid heat sink for thermal cooling and achieve the highest brightness possible. Built to last, solid metal heat sink core with constant current inductor. Easy install, no tools or wiring needed, plug n play. Built to last with 12 month warranty. Approx. 700 lumen per light at 6000k Hyper white Model Fitment: Hyundai i30, i30n$35.00
P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – MK7 / MK7.5 Golf R - (2014-2019)
P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 SensorsRegular Price: $594.00
Special Price $534.60
P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – Audi MK1 Q5/SQ5 Gauge (2008 - 2017)
Compatible with all Mk1 Q5 Models (8R)
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
- OEM Integration - installs in your vent for a sleek install while retaining air flow
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature (Charge Air Cooler Temp) "CAC-AIr" on 3.0T models
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
OEM Vent Option
- We install the display in an OEM vent to make your install even easier
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Need more details?
Check out the V3 install page for configuration and installation info.
Regular Price: $594.00
Special Price $535.00
P3 V3 OBD2 - BMW F2X / F87 Gauge (2013+)
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? (hard-wire harness kit also available)
- OEM Integration - installs in your vent for a sleek install while retaining air flow
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
OEM Vent Option
- We install the display in an OEM vent to make your install even easier
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Regular Price: $594.00
Special Price $534.60
P3 Cars V3 OBD2 Vent Multi-Gauge - VW Golf MK8 R
P3 Cars V3 OBD Vent Gauge to suit VW MK8 Golf R. P3 Digital gauges provide the highest level of OEM integration and colour matching to suit your vehicle.
Product Description
P3 Cars OBD2 Multi-Gauge for VW Golf MK8 R – Blue Bars / White Digits
P3 V3 Gauge Features
-
- Plug and Play Install – plugs directly into your OBD2 port (want to keep your OBD2 port open?
- OEM Integration – installs the dash and cluster trim for a sleek install
- Versatility – read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing – read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Engine oil temperature (GTI and Golf R)
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
- Plug and Play Install – plugs directly into your OBD2 port (want to keep your OBD2 port open?
Optional Add-Ons
- Analog Oil Pressure Sensor – DON’T RELY ON AN OIL PRESSURE LIGHT ALONE! See your ACTUAL oil pressure with our 0-150 psi analog pressure sensor.
- P3 Analog Boost sensor – plugs directly into gauge harness, no wiring required)
- Boost tubing kit – Approx. 5′ of 5/32″ O.D. flexible plastic boost tubing with vacuum “T” and 3 sections of 5/32″ I.D. vacuum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit – this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter – attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
- Wideband o2 Sensor Kit – Everything you need to add a wideband o2 sensor to your exhaust. Ties to P3 gauge analog input with single wire
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don’t care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don’t.
No more bulky pillar or column pods… No more squinting to read tiny pixelated screens… While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it’s bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We’ve got that covered too.
We’ve torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Please Note- The gauge does not come pre-installed in the air conditioner vent. Vent is not included.
- We only stock gauges for Right Hand Drive vehicles
Regular Price: $689.00
Special Price $550.00
-
RS3 8V Sportback (Pre-Facelift) Window Vents (Pair)
https://cdn.shopify.com/s/files/1/0019/9858/5926/files/Window_Vent_Instructions.pdf$175.00
GT Mustang S550 FN Side Skirt Splitters (Pair)
DETAILSAdjustable Side winglets sold separately.
Finish the exterior aesthetic of your Mustang S550 FN with our side skirt splitters - renowned for their durability under all driving conditions worldwide! For the first time we have included pre-pressed brass thread fittings on both ends of the side skirt splitter, which will allow for the installation of our adjustable Mustang S550 FN side winglets (sold separately) for both front and rear ends of the side splitter. Easy install instructions are included and side skirt removal is NOT required.
The Mustang S550 FN entire body kit range shares the same technology used in our renowned WRX, Golf GTI and Focus RS line up which is trusted by car enthusiasts around the world.All our lip splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our front splitter stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.
Brass threads located on each side will for easy installation of our adjustable Mustang S550 FN side winglets, creating your own style with our bolt-on accessories range (sold separately).
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
GT MUSTANG S550 FN SIDE SKIRT EXTENSION SPLITTER KIT INCLUDES:
- Mustang S550 FN side skirt splitters (pair)
- 2 Flow Designs stickers
- Fitting kit
GT MUSTANG S550 FN SIDE SKIRT EXTENSION SPLITTER MATERIAL & FINISH:
- 10mm thick polyethylene composite, bevelled edges
- Hand polished satin black
$419.00
GT Mustang S550 FM Front Splitter Winglets (Pair)
DETAILS
Our adjustable front splitter winglets will bolt directly onto our Mustang S550 FM front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
The Mustang S550 FM body kit range shares the same durability and technology as our renowned WRX, Golf GTI and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
Mustang S550 FM front lip splitter and Mustang S550 FM front extensions sold separately.
GT MUSTANG S550 FM FRONT SPLITTER WINGLETS KIT INCLUDES:
- Mustang S550 FM adjustable front splitter winglets (pair)
- 2 Flow Designs stickers
- Fitting kit
GT MUSTANG S550 FM FRONT SPLITTER WINGLETS MATERIAL & FINISH:
- 4.5mm thick textured ABS
- Scratch resistant textured ABS plastic
$79.00
Flow Designs - VW MK8 Golf GTI Full Lip Splitter Set - No Accessories
DESCRIPTION
Suitable for MK8 Golf GTI
INSTALL DOES NOT REQUIRE BUMPER REMOVAL
PACKAGE PRICE FOR THIS SET INCLUDES:
- MK8 Golf GTI front lip splitter with bumper reinforcement plate
- MK8 Golf GTI side skirt splitters
- MK8 Golf GTI rear spats
- MK8 Golf GTI Flow-Lock rear diffuser
- ADD: Rear Window Vents (Pair), Rear Spoiler Extension &/or Fire Extinguisher Bracket/Mount if desired.
Please note you are receiving a special price when you purchase the VW MK8 Golf GTI complete body kit splitter set.
DETAILS:
Get the original and best MK8 Golf GTI splitter kit from Flow Designs Australia, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and tuners worldwide. Being one of the first to conceptualise, develop and manufacture the strongest lip splitters on the market, all our splitter components are backed by our unbeatable 10 year warranty (excludes all ABS accessories). Our 10mm polyethylene composite used in our splitter range is completely shatter-resistant and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are.
The MK8 Golf GTI splitter kit is completely designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your splitter kit, it is hand-finished, polished and quality inspected by our team to ensure you receive parts of the highest quality and craftsmanship.
All our splitter products are precision designed to accurately suit OEM bumpers/side skirts. Everything is model specific so perfect fitment is guaranteed, and instructions are provided for easy installation process (which can be completed with simple hand tools).
The Volkswagen MK8 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
MK8 GOLF GTI FULL LIP SPLITTER KIT INCLUDES:
- MK8 Golf GTI front lip splitter & bumper reinforcement plate
- MK8 Golf GTI side skirt splitters (pair)
- MK8 Golf GTI Flow-Lock rear diffuser
- MK8 Golf GTI rear spats/pods (pair)
- x2 Flow Designs stickers
- x1 Flow Designs air freshener
- Fitting kit
- x1 EDITION 1 stickers (limited to first production run preorder purchases)
MK8 GOLF GTI FULL LIP SPLITTER KIT MATERIAL & FINISH:
- Front lip splitter, side skirt splitters, rear valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges, impact-resistant
- Hand polished satin black
- Flow-Lock fins: scratch resistant textured ABS plastic
- Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
- Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
- Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
HOW STRONG ARE OUR SPLITTERS?
FAQ
$1,699.00
SAFE & SECURE SHOPPING
