COSMETIC - Genuine VW - P3 Cars - Flow Designs

P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors

Compatible with all Mk1 Q5 Models (8R)

P3 V3 Gauge Features

• Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
• OEM Integration - installs in your vent for a sleek install while retaining air flow
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

• Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
• Coolant temperature
• Air/Fuel ratio (can be read in AFR or Lambda)
• Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
• Intake air temperature (Charge Air Cooler Temp) "CAC-AIr" on 3.0T models
• Throttle angle
• Ignition timing
• Engine RPM
• Exhaust gas temperature
• Battery voltage
• Programmable shift light
• Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
• Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
• Acceleration timers (0-60mph/0-100mph/60-130mph)
• Braking timers (60-0mph/100-0mph)

OEM Vent Option

• We install the display in an OEM vent to make your install even easier

Optional Add-Ons

• P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
• Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
• P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
• Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
• OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

You asked, we answered.

The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.

No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!

Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.

We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

Need more details? 

Check out the V3 install page for configuration and installation info.

P3 V3 Gauge Features

• Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? (hard-wire harness kit also available)
• OEM Integration - installs in your vent for a sleek install while retaining air flow
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)

• Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
• Coolant temperature
• Air/Fuel ratio (can be read in AFR or Lambda)
• Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
• Intake air temperature
• Throttle angle
• Ignition timing
• Engine RPM
• Exhaust gas temperature
• Battery voltage
• Programmable shift light
• Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
• Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
• Acceleration timers (0-60mph/0-100mph/60-130mph)
• Braking timers (60-0mph/100-0mph)

OEM Vent Option

• We install the display in an OEM vent to make your install even easier

Optional Add-Ons

• P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
• Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
• P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
• Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
• OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

You asked, we answered.

The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.

No more bulky pillar or column pods... No more squinting to read tiny pixelated screens...  While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!

Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.

We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

P3 Cars V3 OBD Vent Gauge to suit VW MK8 Golf R. P3 Digital gauges provide the highest level of OEM integration and colour matching to suit your vehicle.

Volkswagen MK7 Golf GTI Front Splitter & Aerospacers

Details:

The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept all our add-on accessories for the MK7 GTI such as winglets and splitter extensions.

---

Kit Includes:

• Front splitter with pre-pressed in threaded brass inserts (Front Extensions and Front Winglets sold separately)
• Bumper reinforcement bracket
• Pre-mounted adjustable Aerospacers
• 2 Flow Designs stickers
• Fitting kit

CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.

Material:

• Front Splitter: 10mm thick polyethylene composite

Finish:

• Hand polished satin black
• Bevelled edges

Why do we use Polyethylene Composite for Flow Designs Splitters?

Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)

Carbon Fibre is better isn’t it?

As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

 

Shipping Dimensions for the type of product:

Front
184x55x5 @5kg

Side
194x14x4 @5kg

Diffuser
92x25x7 @2kg

Spat
25x25x4 1kg

Winglets
25x13x11 @.5kg

DETAILS

Protect your bumper from scrapes or kerbing with our MK7 Golf R front lip splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

MK7 Golf R front extensions and MK7 Golf R front winglets sold separately. 

---

KIT INCLUDES

• MK7 Golf R front lip splitter
• Pre-mounted adjustable Aerospacers
• Stainless steel crossbar mounts (pair: left & right)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

DETAILS

Side winglets sold separately.

Get the original and best side skirt splitter for your MK7 Golf GTI, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and car tuners worldwide. Being the first to conceptualise, develop and manufacture the strongest front and side skirt splitters on the market, all our side splitters are backed by our 10 year warranty. Our 10mm polyethylene composite used in our side splitters are completely shatterproof and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are. 

All Flow Designs MK7 Golf GTI side skirt splitters are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your front lip splitter, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship. 

All our side splitters are precision designed to accurately suit the OEM MK7 Golf GTI side skirt. Perfect fitment is guaranteed and instructions are provided for an easy installation process (which can be completed with simple hand tools). We have pre-drilled all our parts so there is no guesswork for you, with visual prompts so you know exactly where the side splitter sits on your MK7 Golf GTI OEM side skirt.

The Volkswagen MK7 Golf GTI side splitter range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

Further customise your side skirt splitter with MK7 Golf GTI side winglets. These can be installed in our pre-pressed brass fittings already installed on the side splitter - the adjustable options allows you to match the width to the wheel setup of your Golf GTI. The complete MK7 Golf GTI Lip Splitter Kit is also available.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

---

VOLKSWAGEN MK7 GOLF GTI SIDE SKIRT SPLITTER KIT INCLUDES:

• Volkswagen MK7 Golf GTI side skirt splitters (pair)
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7 GOLF GTI SIDE SKIRT SPLITTER MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

DETAILS

Protect your body work from scrapes or kerbing with our MK7 Golf R side skirt splitter! All our lip splitters are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are.

Installation is simple with pre-drilled holes so there is no guesswork. We have machined out a pocket for the OEM Golf side skirt to sit snug into - this way our side skirt splitters will mount up flush with the stock body kit once installed on the car.

We also have designed other visual prompts to show where the side skirt splitter aligns with the OEM side skirt and Golf R chassis.

The pre-installed brass thread allow for installation of our MK7 Golf R adjustable side winglets which are sold separately as a bolt-on accessory to suit our side skirt splitters. 

---

KIT INCLUDES

• MK7 Golf R side skirt splitters (pair)
• 2 Flow Designs stickers
• Fitting kit

MATERIAL & FINISH

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black

DETAILS

Experience Flow-Lock rear diffuser for your Volkswagen MK7 Golf GTI, sharing the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

The rear valance and diffuser fins will clear the MK7 Golf GTI dual exhaust tips with ease and 10 year warranty applies for the rear valance (excludes ABS fins).

The Flow-Lock interlocking system allows for the final assembly of the diffuser fins without tools or fasteners. A simple push and click and the kit is assembled and ready for installation - this means zero exposed hardware giving you the cleanest look for your MK7 Golf GTI rear. Front lip splitter is also available for the MK7 Golf GTI.

No more L-brackets, no additional exposed hardware and no double-sided tape, experience the Flow-Lock difference today!  

All Flow Designs MK7 Golf GTI rear diffusers are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your rear diffuser, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship. 

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

---

VOLKSWAGEN MK7 GOLF GTI REAR DIFFUSER KIT INCLUDES:

• Volkswagen MK7 Golf GTI rear diffuser (rear valance and Flow-Lock diffuser fins)
• 2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7 GOLF GTI REAR DIFFUSER MATERIAL & FINISH:

• Valance: 10mm thick polyethylene composite, bevelled edges
• Flow-Lock diffuser fins: 4.5mm thick textured ABS 
• Valance: Hand polished satin black
• Flow-Lock diffuser fins: scratch resistant textured ABS plastic
• CNC engraved logo and features
  

VW MK7 Golf R Rear Valance & Flow-Lock Diffuser Fins Details: The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products. All new diffuser fins featuring Flow-Lock interlocking integral assembly system allows installation without the need of tools or fasteners. No more double sided tape, nuts, bolts and "L" brackets. Strong, secure, easy installation. This part is only compatible with our new VW MK7R kit. Read More Kit Includes: 3x Flow-Lock Diffuser Fins (Left, Middle Right) Centre Valance with Flow-Lock channels 2 Flow Designs Stickers Fitting kit Material: Valance: 10mm thick polyethylene composite, bevelled edges Flow-Lock Diffuser Fins: 4.5mm thick textured ABS Finish: Valance: Hand polished satin black Flow-Lock Diffuser Fins: Scratch resistant textured ABS plastic Rear Spats sold separately. Why do we use Polyethylene Composite for Flow Designs Splitters? Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?) Carbon Fibre is better isn’t it? As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.