SHIFT FASTER, DRIVE FASTER
The IE DSG Tune for your VW MK6 GTI, Jetta, GLI, or Audi 8J TTS 2.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 2.0T TSI into a fully rounded performance monster.
LEADING FEATURES
Lightning fast gear shifts
Higher shift points of 6800 RPM
Kick down in manual mode eliminated
Lag time reduced when starting off in first gear
Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Works flawlessly with an IE ECU tune
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
WHAT DOES A DSG TRANSMISSION TUNE DO?
The IE DSG Tune for the MK6 2.0T TSI has been carefully set up to make the car way more fun to drive. It completely reworks the shift point mapping in both drive and sport. The transmission will no longer lug the engine in drive mode. Clutch clamping forces are increased so the transmission can safely handle much more power. Shifts are much, much faster taking time directly off the 0-60 and ¼ mile times.
ONE TUNE FOR ALL STAGES
IE’s TCU/DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset. A great deal of sportiness is added from the tune while maintaining factory smoothness and driveability. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve from faster shifting. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
USER ADJUSTABLE LAUNCH CONTROL
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
Available Launch Control RPMs:
3200 RPM
3400 RPM
3600 RPM
3800 RPM
4000 RPM
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your 2.0 TSI engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The MK6 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
MULTIPLE LAUNCH RPMS
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE
The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI engine and transmission.
VEHICLE FITMENT
VW - MK6 GTI 2010-2014 (MK6) 2.0T EA888 Gen1/2 TSI engines
VW - MK6 Jetta 2011-2013.5 (MK6) 2.0T EA888 Gen1/2 TSI engines*
VW - MK6 GLI 2011-2013.5 (MK6) 2.0T EA888 Gen 1/2 TSI engines*
AUDI - TTS 2008-2015 (8J) 2.0T TFSI EA113 engines
*This DSG calibration is for 2.0T TSI EA888 Gen 1 & 2 engines only. Many Jetta and GLI models are equipped with a new engine variation (EA888 Gen 3) after 2013.5 and later. This tune does NOT support Gen 3 model engine TCUs. Please verify if your engine is an EA888 Gen 1/2 2.0T TSI or EA888 Gen 3 2.0T TSI tune before ordering.
IE DSG tunes are available only for vehicles equipped with 6 speed DSG (DQ250) transmissions. Does not function with manual 6-speed transmission cars.
Are you sick and tired of plugging your Apple iPhone into the USB port every time you get into your car.
At VW Central we have found the solution for factory fitted vehicles. Simply plug our USB adapter into the factory USB port and it will use Bluetooth to make a wireless connection with your vehicle.
Plug and Play. No coding required.
Please note this will not work if your vehicle doesn’t already have factory fitted CarPlay functionality.
Suitable for VW Vehicles 2016+
MK7 & MK7.5 MQB GOLF R / S3 TUNE FEATURES
Stage 1 & Stage 2 files available to match any level of bolt-on parts
Horsepower & torque gains maximized on stock engine & turbo
Switch between 91, 93, & 104 octanes at no extra cost
Stock boost control optimized for a smooth driving experience
Rev limiter increased to 7100 RPM in manual mode or with DSG flash
Quick and easy to tune your car at home
Launch control boost pressure increased for faster starts (DSG)
Increased rev limiters (transmission stock shift points remain)
Road speed limiters removed
All engine safety protocols remain for reliability and long engine life
POWERlink allows file and octane switching in less than 2 minutes
Engineered for all climates and elevations
Simple data logging for diagnosis purposes
Flash back to stock at any time
HOW TO IE TUNE YOUR 2.0T (IS38)
IE ECU Stages for your VW Golf R or Audi S3 2.0T IS38 Turbo (MQB) engine is available for stock engines or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your MK7 R or 8V S3 in a matter of minutes!
WHAT DOES THE AUDI 2.0T ECU TUNE DO?
Adding an IE Performance ECU Tune to your Golf R packs a serious punch both in performance gains and in additional features resulting in extremely competitive power that will give you the edge on the street or track. IE’s in-house calibration engineers have taken several steps to ensure you a smooth and safe operation by maintaining factory safety limits, or “fail safes”, resulting in reliability. As a final step, the software has been calibrated in test environments that ensure smooth operation in all types of climates and elevations.
AVAILABLE MK7/8V IS38 TUNES
Stage 1 is precisely calibrated to make the most of your stock hardware. Power gains are delivered smoothly across the entire powerband and many performance features have been added. Enthusiasts will have the choice between 91 & 93 fuel octanes and the ability to flash back to stock within minutes. As another added benefit, your IE Stage 1 Tune has been designed to adapt to minor bolt-on modifications, such as an intercooler or intake. Low torque and high torque files are available.
Stage 1 Low Torque recommended hardware
-IE Cold Air Intake (recommended)
Stage 1 High Torque required & recommended hardware
-IE DSG Transmission Tune (required)
-IE Cold Air Intake (recommended)
Ready to release every last ounce of power from your stock turbo 2.0T engine? The Stage 2 ECU tune takes full advantage of performance bolt-ons including downpipe, intake, and intercooler. You can install this setup in a single weekend and transform your Golf R or S3 into a true AWD monster with 432HP and 467TQ! Easily switch between free octane tunes whenever you want to add more power with your choice of 91, 93, or 104 octane files. Load Stage 2 and get ready to experience the true power monster that has been hiding under the hood of your MK7 Golf R or 8V S3.
Stage 2 required & recommended hardware
-IE Performance Downpipe (required)
-IE DSG Transmission Tune (required)
-IE Intercooler (highly recommended)
-IE Cold Air Intake (highly recommended)
AVAILABLE OCTANES
All available tune stages include various octanes at no extra cost. Using the IE POWERlink cable you can switch between octanes as needed. You can load high octane files for race day and run regular pump octane on your daily commute and save at the pump.
STAGE 1 OCTANES:
Pump 95
Pump 98
STAGE 2 OCTANES:
Pump 95
Pump 98
Race Fuel 108
EASY INSTALLATION – TUNE FROM HOME
IE’s own in-house developed POWERlink cable gives you the control to unlock your engine’s true potential from your own garage or driveway. Enjoy the freedom to quickly reflash your car’s engine control unit (ECU) or transmission control unit (TCU) with IE’s line of performance tunes. The cable simply plugs into your vehicle’s OBD-2 port delivering instant access to choose different IE Tune stages to match installed hardware, take advantage of different fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.
IE ECU Stages for your Audi B9 engine are available for stock (Stage 1) or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your Audi in a matter of minutes!
WHAT DOES THE IE AUDI B9 ECU TUNE DO?
Your ECU (Engine Control Module) is a computer loaded with maps to control the operating conditions of your Audi 2.0T engine. The factory calibration is designed to function with stock installed hardware, meet new car regulated standards, and de-powered to not compete with higher performance models. IE's motorsport recalibration brings your engine to life by unleashing its full performance potential on stock hardware or to match your installed hardware upgrades while maintaining reliability and factory-like comfort. This is how your turbocharged Audi should have felt from the factory!
AVAILABLE AUDI 2.0T STAGES
The IE Stage 1 Audi B9 A4 or A5 TSI tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware or to get the most out of your installed intake and intercooler. In a matter of minutes, your new ECU Tune will deliver a massive boost in performance.
Stage 1 recommended hardware -IE Cold Air Intake -IE Intercooler
Looking to maximize the performance of your stock engine and turbo? IE Stage 2 Upgrade fine-tunes the ECU to match installed aftermarket hardware allowing the turbocharger to breath free and improve power gains across the powerband. This is the maximum power available from a stock turbo car.
Required to flash your tune, The IE POWERlink cable gives you control to unlock your engine’s true potential from your own garage or driveway. Quickly reflash your B9 Audi with your choice of ECU Stage through the cars OBD-II port. Upgrade tune stages to match installed hardware, take advantage of different fuel octanes, flash to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via data-logging.
VEHICLE FITMENT
Audi - B9 A4 Quattro 2016+ with 2.0T engine*
Audi - B9 A5 Quattro 2016+ with 2.0T engine*
Audi - B9 A4 Quattro Allroad 2017+ with 2.0T engine*
*For all wheel drive (Quattro) vehicles only, does not support front wheel drive engines at this time.
OBDeleven with 12 month PRO Plan OBDeleven becomes a professional diagnostic tool. Operating with easy to use application it allows to fully access all car systems, program, monitor and activate various functions via your iOS, Android, and Huawei devices.
Official and licensed full-featured software is constantly updated with new features. The programming temporarily is not supported on models that are manufactured from 2020 and have SFD protection. The negotiation regarding the support of these models is in progress.
Pack includes:
Next generation device
12 month PRO Plan
200 credits
Pro Plan and 200 credits will be sent to your email
Frequently Asked Questions:
Q. What vehicles are supported with One-Click-Apps by OBDeleven A. Please refer to OBDeleven Official Supported Vehicles Page
Q. Are OBDeleven credits included? A. Yes, the Pro Pack includes 200 Credits with the kit, and provides you with 12 months access on their PRO Plan
Q. What vehicles are supported with this device? A. Vehicles built after 1996 that are Audi, Volkswagen, Seat, Lamborghini, Bentley and Skoda models are supported.
Q. How do I know what tweaks or modifications I can code for my vehicle. A. We do not provide support with the coding and adaptation, there are many YouTube guides for VCDS & OBDeleven: Here is an example of someMK7 Coding and Adaptationavailable for your OBDeleven device Q. Does this product require an internet connection? A. Yes, an internet connection is required whilst using the OBDeleven device. We recommend having good reception and a strong signal to ensure a stable connection with their servers.
Q. If I require assistance with this product who do I contact? A. OBDeleven have a dedicatedsupport area
Q. Will any changes I do to my vehicle with OBDeleven have any effect on my factory vehicle warranty? A. Any form of modification may impact your warranty. VW Central will not take any responsibility for damage caused by using the OBDeleven device.
Q. Where do I find the OBDeleven App? A. The OBDeleven App is available on both the Apple App Store or for Android Users on the Google Play Store.
Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.