Product Details
The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation.
Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle!
You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device.
In house designed and built in the USA, our Boost Tap includes the following:
Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap
3 Vacuum Ports with 1/4" Hose Barb Fittings
3 Vacuum Set Screws
Medium Strength Thread Lock
OEM Securing Clip
Manifold Pierce Alignment Tools
In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!
MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015)
8V Audi A3/S3 (up to production date Sept 27, 2015)
MK3 Audi TT/TT-S (up to production date Sept 27, 2015)
T304 Seamless Stainless Steel tubing
-T304 Stainless Steel flanges
-100% TIG Welded
-T304 Stainless Steel 02 bung
-Torca Accuseal Stainless Steel Clamps
-Great Sound even with factory exhaust, no drone!!
To ensure the best performance and operation, proper tuning software must be used (Stage 2 software from most large tuning companies is compatible).
At CTS Turbo we are proud to announce our new air intake system for the 2.5T EVO MK3 TTRS & 8V.2 RS3 (facelift) 2018 model year.
The OEM air scoop works in conjunction with our airbox to seamlessly force cold air into our air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design and 4″ Velocity stack for maximum engine breathing. Our single-piece CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 6-11HP. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.
The coupler included is only compatible with the factory turbo inlet pipe. 4″ coupler for CTS Turbo inlet pipe is available separately.
Product Details:
Mandrel-bent aluminum piping with black powder coating
Reusable air filter with an inverted cone design
4″ composite velocity stack equipped intake
4 Ply silicon connectors with stainless steel clamps
Ram air style airbox with rubberized trim
Bracketry to prevent rattling under engine torquing
At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow.
The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing. Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.
Product Details:
Mandrel bent large bore 3.5" aluminum piping with black powder coating
Coveted Laser etched //CTS Turbo logo
3.5" Reusable air filter with inverted cone design
4 Ply silicon connectors with stainless steel clamps
Sealed air box
Bracketry to prevent rattling under engine torquing
Billet SAI breather adapter and filter (Optional in drop down menu)
Fitment:
2014+ VW Golf (all models)
2014+ VW GTI
2014+ VW Golf R
2018+ Audi A3 (all models)
2018+ Audi S3
NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275
CTS Turbo is proud to announce our high flow turbo inlet for B9 Audi S4/S5/SQ5
The biggest issue with the restrictive factory inlet is apparent when you start to increase the power. Our engineers designed the turbo inlet to be as large as possible; yet still fit perfectly. This was accomplished using the latest in 3D scanning and rapid prototyping technology.
The larger inlet will provide increased flow to the turbo and make sure the engine has all the air that it needs to operate at maximum capacity!
Features:
High flow cast aluminum turbo inlet pipe
Precision machined fitment for the factory turbo
Factory-style PCV connections
Developed, tested and machined in-house
Includes new o-ring and allen head bolts for easy install
At CTS Turbo we are proud to announce our new throttle pipe for the 8V.2 RS3/8S TTRS 2.5T EVO. The OEM charge piping leaves something to be desired with inefficient bends not optimized for performance. The CTS Turbo throttle pipe increases the entire inside diameter to 2.5″ allowing for increased flow and greater performance. The integrated water methanol bungs allow for simple and straightforward installation of kits from Snow Performance. All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, power and torque throughout the entire power band and an aggressive race inspired sound. Product Details:
CTS Turbo is happy to release our high flow turbo outlet pipe kit for MQB vehicles equipped with BOSS V3 kits or hybrid turbochargers. This part is perfect to compliment the 2.5″ turbo outlet on the BOSS V3 kit, making the installation seamless.
The CTS Turbo 2.5″ high flow turbo outlet pipe kit replaces all the factory charge piping between the turbocharger compressor housing and intercooler.
Product Details:
2.5″ turbo outlet fitting
2.5″ Aluminum piping
OEM style pipe bracket
High quality tig welds
Durable powdercoat finish
Fits all MQB models with BOSS V3 kit or hybrid turbos.