SHIFT FASTER, DRIVE FASTER
The IE DSG Tune for your Audi B8/B8.5 S4/S5 3.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 3.0T into a fully rounded performance monster.
LEADING FEATURES
Lightning fast gear shifts
Higher shift points of 7200 RPM
Multiple launch RPMs: 3400, 3600, 3800, 4000
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Works flawlessly with all IE ECU Tunes
Unlimited launches (factory defaults to 200)
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
WHAT DOES A DSG TRANSMISSION TUNE DO?
IE’s Audi S4 (DL501 S-Tronic) DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features and upgrades are included at one low cost. A great deal of sportiness is added to the tune while maintaining factory smoothness and driveability that you love about the S4. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve dramatically from a larger useable powerband provided by the higher shift points.
REQUIRED FOR SELECT ECU TUNES
Required for S4 & S5 Stage 2 dual pulley files, your new transmission tune will no longer lug the engine in drive mode or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
ONE TUNE FOR ALL STAGES
IE’s DSG tunes are all-inclusive without any expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset for any level of hardware or ECU Tune Stage, one cost and you are covered for all and any future upgrades from Stage 1 to Stage 2 billion.
USER ADJUSTABLE LAUNCH CONTROL
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
Available Launch Control RPMs:
3400 RPM
3600 RPM
3800 RPM
4000 RPM
*Some early model B8 DSG TCUs cannot have launch control added to them, as well as some replacement Mechatronics units. Non compatible TCU codes include, but may not be limited to 8K1927156AC and 8K1927156AD. You can use your IE Powerlink tool to check your TCU code. Other DSG tune features will function normally.
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your supercharged 3.0T engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The B8 and B8.5 S4 is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
MULTIPLE LAUNCH RPMS
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tunes were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 3.0T engine and transmission. Perfect for all IE Tunes from Stage 1 to dual pulley and throttle upgrades.
VEHICLE FITMENT
Audi - S4 2008-2016 (B8 & B8.5) 3.0T supercharged engines*
Audi - S5 Coupe 2013-2016 (B8.5) 3.0T*
Audi - S5 Cabriolet 2009-2016 (B8-B8.5) 3.0T*
*IE DSG tunes are available only for vehicles equipped with Audi's 7-speed S-Tronic transmissions. Does not function with manual 6-speed transmission cars.
Already have an IE 3.0T intake? This highly stylized gloss carbon fiber lid is an optional upgrade that will completely transform your engine bay with a high-end performance finish. Specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit.
Sealed heatshield - Separates cold air from engine bay heat
Perfect fitment - No modifications required to bolt-on
Amazing sound - Releases awesome turbo and engine noise
Looks great - Black powder coat, tight clearances, clean angles
AUDI B8 A4 & A5 COLD AIR INTAKE
You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.
The IE Audi B9 A4 & A5 2.0T Cold Air Intake is the perfect addition to any engine bay. Give your Audi added horsepower, torque, snappier throttle response, and an aggressive sound. Typical peak gains from our CAI are roughly 10-20 Horsepower and Torque.
POWER GAINS
The ram air design, velocity stack, and massive 55-inchfilter inlet help deliver the most HP possible from a cold intake system.
Expect peak gains of 10-20+HP/TQ on tuned engines.
INCLUDED IN THE B9 IE CAI KIT
IE Intake velocity stack & heatshield assembly
IE Silicone turbo inlet pipe assembly
IE 5” inlet performance air filter
IE Turbo heat shield
All necessary hardware (clamps, nuts, bolts, etc)
INCREASED AIR FLOW
This Intake delivers an impressive flow increase to feed your turbo. More cold air flow means more power; especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System.
DESIGN DETAILS
IE engineers set out to produce the highest performing cold air intake that looks great and fits like a factory installed part in your A4. The latest in computer design and 3D scanning technology were employed during the development process for a perfect fit and maximum performance. The final product resulted in the greatest performing and best-looking intake available.
HIGH-FLOW VELOCITY STACK
Delivering cold air to your engine is a must for making power. The velocity stack efficiently channels air as quickly as possible into the intake system. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling on heat shields.
CUSTOM HEAT SHIELD
IE uses a three piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay. A second heat shield is mounted above the turbocharger to further protect against power robbing heat off the exhaust and turbo.
PERFECT FITMENT
This Intake fits B9 Audi A4 and A5 without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle free fit. Additionally, the stock rubber mounts allow for engine movement which keeps intake components from getting damaged.
CLASSY AND CLEAN APPEARANCE
Wrinkle black powder coated velocity stack and heat shields result in a sleek and sporty appearance in any engine bay. As a final touch, all IE heat shields are finished with a classy, laser etched, stainless steel IE logo badge.
The following power result data was collected on our in-house Dynapack hub dyno. Dyno chart is as tested at 4500 feet altitude with SAE corrected numbers. Before and after results are direct back-to-back comparisons on a full bolt-on stage 2 B9 A4 2.0T engine. The only change made to the vehicle between testing is the swap from a stock intake with a new clean air filter to the IE Cold Air Intake Kit. Dyno power results are approximate and may vary from car to car.
HORSEPOWER & TORQUE DYNO CHART
HORSEPOWER & TORQUE POWER GAINS OVER STOCK
VEHICLE FITMENT
Audi - A4 2015+ (B9) 2.0T
Audi - A5 2015+ (B9) 2.0T
Audi - A4 Allroad 2015+ (B9) 2.0T
This intake does not fit cars that have a MAF housing/sensor.
IE ECU Stages for your Audi B9 engine are available for stock (Stage 1) or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your Audi in a matter of minutes!
WHAT DOES THE IE AUDI B9 ECU TUNE DO?
Your ECU (Engine Control Module) is a computer loaded with maps to control the operating conditions of your Audi 2.0T engine. The factory calibration is designed to function with stock installed hardware, meet new car regulated standards, and de-powered to not compete with higher performance models. IE's motorsport recalibration brings your engine to life by unleashing its full performance potential on stock hardware or to match your installed hardware upgrades while maintaining reliability and factory-like comfort. This is how your turbocharged Audi should have felt from the factory!
AVAILABLE AUDI 2.0T STAGES
The IE Stage 1 Audi B9 A4 or A5 TSI tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware or to get the most out of your installed intake and intercooler. In a matter of minutes, your new ECU Tune will deliver a massive boost in performance.
Stage 1 recommended hardware -IE Cold Air Intake -IE Intercooler
Looking to maximize the performance of your stock engine and turbo? IE Stage 2 Upgrade fine-tunes the ECU to match installed aftermarket hardware allowing the turbocharger to breath free and improve power gains across the powerband. This is the maximum power available from a stock turbo car.
Required to flash your tune, The IE POWERlink cable gives you control to unlock your engine’s true potential from your own garage or driveway. Quickly reflash your B9 Audi with your choice of ECU Stage through the cars OBD-II port. Upgrade tune stages to match installed hardware, take advantage of different fuel octanes, flash to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via data-logging.
VEHICLE FITMENT
Audi - B9 A4 Quattro 2016+ with 2.0T engine*
Audi - B9 A5 Quattro 2016+ with 2.0T engine*
Audi - B9 A4 Quattro Allroad 2017+ with 2.0T engine*
*For all wheel drive (Quattro) vehicles only, does not support front wheel drive engines at this time.
Bolt on fitment - no hassle, modifications, or poorly fitting parts
Constructed of high-quality 304 stainless
Thick cast & CNC machined turbo flanges for no leaks
High-flow metal matrix 200 cell catalytic converter
Reliable leak-free OEM style flex section
Y-Pipe adapter available for stock catback
CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.
GOING STAGE 2 ON YOUR 2.5T?
Adding an Stage 2 ECU Tune and IE Downpipe to your Audi RS3 or TTRS is the ultimate choice power adder on the stock turbo & engine! Offering an aggressive and unique motorsport sound from your 5 cylinder turbo engine with complete unrestricted air flow for unmatched maximum power. Enjoy proven performance gains and leading features such as bolt-on direct fit install, long-life construction, cast sections, and amazing sound.
STOCK DOWNPIPES ROB HORSEPOWER
Your 2.5T engine is capable of supercar level horsepower on the stock engine and turbo reliably with a Stage 2 Tune alone! However, the factory installed downpipe is designed for maximum emissions and economy, not for power. This design is riddled with small piping, harsh bends, and power sucking restrictions that limit your power gains to only Stage 1 Tune levels. In order to correct that, a true performance downpipe is required to open up the exhaust flow and allow the turbo to spin freely!
MAXIMUM FLOW DOWNPIPE
IE engineers set out to design the ultimate downpipe option for the 8V RS3 and 8S TTRS chassis by employing leading-edge development technology along with highly specialized cast manufacturing. By using cast sections this allowed our engineers to design specialized shapes into the downpipe itself that lets it conform and fit into very tight spaces while retaining it's large size and maximized flow rates. The design is so specialized that 3D scanning was used to build a digital model of the chassis to design in allowing us to build shapes down to the millimeter. This design is just not possible using traditional stainless steel pipes and bends found in most exhaust manufacturing.
Bolting this downpipe onto your Audi along with other matching bolt-ons and an IE STage 2 Tune results in up to 577 horsepower! You can take your RS3 or TTRS from a sporty driver to a power monster in a single weekend. Downpipe requires Stage 2 Tune for a complete installation.
LET THAT 5 CYLINDER ROAR!
Your RS 2.5 TFSI engine has an amazing 5 cylinder sound that all enthusiasts love. Unfortunately, much of that sound is muffled by the factory downpipe system. The cast design of your IE downpipe creates an aggressive and deep tuned sound that showcases the unique rumble from the 5 cylinder turbo engine and transforms it into an all-out howling beast!
HIGH-FLOW CATALYTIC CONVERTER
By employing a high flow metal matrix catalytic converter, horsepower loss is almost non-existent for track days and drag events while keeping unpleasant smells and increased emissions to a minimum.
LONG-LIFE MANUFACTURING
IE Y-PIPE ADAPTER REQUIRED FOR STOCK CATBACK
This downpipe holds the seal of IE quality and has been manufactured to last as long as you own the vehicle and beyond. Constructed from 304 stainless steel and expertly tig welded for incredible reliability. The cast and CNC machined turbo flange is thick to prevent leaks or warping at the turbo while a quality flex section works to allow normal movement between the chassis and engine without adding strain to the downpipe.
IE's Y-Pipe Adapter Kit (sold separately) is used to adapt your IE Downpipe to a stock catback exhaust section. This high quality stainless steel cast adapter is a complete kit that will make installing our downpiep to your stock exhaust painless and easy! This part is not required if you are installing an IE Catback System.
BOLT-ON INSTALLATION
This downpipe kit bolts-on directly to either an IE Catback or stock catback (with adapter) with no permanent modifications or alterations to the vehicle. The removal of the factory downpipe is a very long process and is only recommended to be performed by a professional. DIY is not recommended for most on this product.
This listing is for the IE POWERlink Flash Tool only. You may also purchase this cable with IE performance tunes for your vehicle (sold separately).
POWER IN THE PALM OF YOUR HAND
Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!
LEADING FEATURES
Uploads IE Performance Tunes (sold separately)
Apple & Android mobile flashing app (supported platforms)
Flashes engine & transmission tunes
Direct OBD2 vehicle flashing in only minutes
Customizable live gauge display (Mobile)
Octane and feature switching (varies by platform)
Upgrade tune stages for matching hardware
Return to 100% stock programming at anytime
Read and Clear diagnostic codes
Check and clear emissions monitors
Data-logging (Windows 10+ laptop)
FLASH WITH A LAPTOP
Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.
DEVICE
PORTS
OS
PROC.
POWER
RAM
Laptop or Tablet
Wifi & USB
Windows 10 or newer
32 or 64 bit
1.0ghz or greater
4GB or greater
NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.