The IE Performance Air Intake System for your Audi B9/B9.5 SQ5 delivers significant airflow gains from a high-quality polymer design. Enjoy increased performance from dramatically improved turbo and engine efficiency while maintaining low intake air temps for up to 19HP & 21ft-lbs on tuned engines. Add instant power, sound, and fun without sacrificing style or quality with our premium air intake system for your S-class V6 turbocharged SUV.
Currently Shopping by
-
Brands:
Integrated Engineering
New South Performance
P3 Cars
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Autotech (3)
- CTS Turbo (71)
- Eibach (33)
- Flow Designs (211)
- Forge Motorsports (9)
- Genuine VW (9)
- H&R Springs (22)
- INA (1)
- Integrated Engineering (50)
- IPE (9)
- Leyo Motorsport (70)
- New South Performance (5)
- P3 Cars (30)
- Supernova (21)
- SuperPro (86)
- T-carbon (1)
- Turbosmart (13)
- VW Central (14)
- Whiteline (119)
- XFORCE (64)
- Filter By Price
- -
Vehicles - New South Performance - Integrated Engineering - P3 Cars
WRX/STI ColumnPod
Mounting on top of the steering column, the WRX/STI ColumnPod™ is designed to hold a 2” or 2 1/16” (52mm) gauge on your Impreza WRX/STI (2008-2014) or Forester (2009-2013)
The unique design offsets the gauge to the left for maximum visibility of the dash instrumentation.
Molded from ABS and matched in color and gloss, the ColumnPod™ looks like an OEM installation. It holds the gauge at an angle that minimizes distractions and helps keep your eyes on the road.
Our exclusive design hides all wires and tubes from view.
Regular Price: $94.00
Special Price $59.00
IE Harsh Climate 5" Oiled Air Filter & Sock Upgrade Kit
EXPLORE WITH CONFIDENCE
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
KIT DETAILS
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
- 1X IE oiled 8 pleat density performance 5" filter
- 1X IE pre-filter intake sock
- 1X Air filter worm clamp
RECHARGING
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
COMPATIBLE INTAKES
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
- IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
- IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
- IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
- IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
- IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
- IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
- IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
- IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
- IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
- IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
- IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
- IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
- IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
- IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta
$129.00
IE Air Intake System For Audi B9/B9.5 SQ5 3.0T
ONE-PIECE
POLYMER
DESIGNREAL POWER
+19HP & 21TQ
WITH ECU TUNEINTEGRATED
VELOCITY STACK
HIGH FLOWLEADING FEATURES
- Rotomold polymer for superior heat resistance
- Up to 19HP & 21ft-lbs over stock (with software)
- Flow 24% more than the factory airbox
- Flow 50.4% more than stock with IE turbo inlet
- Increased turbo & engine sounds
- Maximized turbo & engine efficiency
- Huge 5" air filter for excellent laminar flow
- Integrated velocity stack for smooth airflow
- High pressure & low pressure air zones
- Designed for stock turbo and hybrids (with IE turbo inlet)
- Factory style mounts for reliable & easy installation
- All stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum filter plate & velocity stack
- Stainless laser-etched logo plate
ROTOMOLD POLYMER
A special rotational molding method is used to manufacture a robust single-piece intake with consistent wall thickness, strong corners, and superior heat resistance. This also allows for complex shapes and angles to maximize internal volume for air supply and smooth flow for the most performance available. Enjoy a performance air intake without compromise.
SEAMLESS DESIGN
The entire intake is designed as a single piece airbox to offer a seamless and complete look with an above factory quality fit and finish.
BUILT-IN VELOCITY STACK
The built-in velocity stack creates a smooth transition from the large filter area to the turbo inlet. This motorsport design offers excellent laminar properties resulting in a very high inertia flow with reduced drag and power-robbing turbulence.
OPTIONAL TURBO INLET
Our intake airbox is designed to accept our cast turbo inlet pipe to increase airflow over stock from 24% (intake only) up to 50.4% combined! Adding a turbo inlet further reduces significant air restrictions while maintaining the largest size possible from the airbox to the turbocharger.
Turbo inlet pipe is an optional upgrade and can be purchased with your intake or added at a later date.HYBRID TURBO READY
The intake and turbo inlet combo makes upgrading to a hybrid turbo a simple bolt-in job. CNC-machined and o ring sealed adapter rings fit the stock or a variety of aftermarket turbos without hassle. The turbo inlet continually adapts to the turbo to not introduce any restrictions and maintain the largest size possible when upgrading turbos.
Hybrid turbo adapter rings are sold separately from the turbo inlet upgrade.IE SQ5 POLY INTAKE SYSTEM & TURBO INLET PIPE INSTALLED WITH PURE750 TURBO
MULTIPLE PRESSURE ZONES
Multiple air supply avenues are used to guarantee airflow for any power level. High-pressure flow from the grille directly provides a ram air supply to the filter. If additional air demands are required, the intake will pull low-pressure air through the filter plate louvers as needed. This dual-zone design ensures your intake will never be a power limitation for even the most extreme builds.
PERFORMANCE SOUND
Your stock airbox is manufactured under regulations to perform only one job; mute all engine and turbo sound at any performance cost. Your new IE poly intake system will release the sweet sounds of turbo spool, engine throttle, and diverter blow-off that your S-class SUV deserves.
PRECISION DESIGN
3D scanning tools are leveraged to create a high-resolution digital environment allowing our engineers to take advantage of all available space for a complete performance design while ensuring a hassle-free install.
$899.00
P3 Cars V3 OBD2 Vent Multi-Gauge - VW Golf MK8 R
P3 Cars V3 OBD Vent Gauge to suit VW MK8 Golf R. P3 Digital gauges provide the highest level of OEM integration and colour matching to suit your vehicle.
Product Description
P3 Cars OBD2 Multi-Gauge for VW Golf MK8 R – Blue Bars / White Digits
P3 V3 Gauge Features
-
- Plug and Play Install – plugs directly into your OBD2 port (want to keep your OBD2 port open?
- OEM Integration – installs the dash and cluster trim for a sleek install
- Versatility – read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing – read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Engine oil temperature (GTI and Golf R)
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
- Plug and Play Install – plugs directly into your OBD2 port (want to keep your OBD2 port open?
Optional Add-Ons
- Analog Oil Pressure Sensor – DON’T RELY ON AN OIL PRESSURE LIGHT ALONE! See your ACTUAL oil pressure with our 0-150 psi analog pressure sensor.
- P3 Analog Boost sensor – plugs directly into gauge harness, no wiring required)
- Boost tubing kit – Approx. 5′ of 5/32″ O.D. flexible plastic boost tubing with vacuum “T” and 3 sections of 5/32″ I.D. vacuum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit – this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter – attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
- Wideband o2 Sensor Kit – Everything you need to add a wideband o2 sensor to your exhaust. Ties to P3 gauge analog input with single wire
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don’t care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don’t.
No more bulky pillar or column pods… No more squinting to read tiny pixelated screens… While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it’s bold, bright display that allows you to pick up info at a glance.
Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.
Electronics in a harsh climate? We’ve got that covered too.
We’ve torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Please Note- The gauge does not come pre-installed in the air conditioner vent. Vent is not included.
- We only stock gauges for Right Hand Drive vehicles
Regular Price: $689.00
Special Price $550.00
-
P3 V3 OBD2 - VW Mk8 Gauge (2020+)
P3 V3 Gauge Features
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open?
- OEM Integration - installs the dash and cluster trim for a sleek install
- Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
- Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly
P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
- Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
- Coolant temperature
- Engine oil temperature (GTI and Golf R)
- Air/Fuel ratio (can be read in AFR or Lambda)
- Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
- Intake air temperature
- Throttle angle
- Ignition timing
- Engine RPM
- Exhaust gas temperature
- Battery voltage
- Programmable shift light
- Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
- Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
- Acceleration timers (0-60mph/0-100mph/60-130mph)
- Braking timers (60-0mph/100-0mph)
Optional Add-Ons
- P3 Analog Boost sensor - plugs directly into gauge harness, no wiring required)
- Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties
- P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included
- Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim
- OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port
You asked, we answered.
The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.
There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.
Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.
Regular Price: $689.00
Special Price $550.00
- Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open?
Mk7 RHD VentPod
For drivers side vent of RHD 2015 GTI or Golf.Not for JettaRegular Price: $127.00
Special Price $62.00
P3 Cars OBD2 Multi-Gauge V3 2019 Release for MK7 / MK7.5 Golf GTI (2014-2019) – Right Hand Drive
P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 SensorsRegular Price: $594.00
Special Price $534.60
New South Performance - MK7 & MK7.5 Golf R Boost Gauge
Matches Mk7 instrumentation. Includes gauge,6' nylon tubing, TSI boost tap, electrical connectors, zipties.Regular Price: $208.00
Special Price $69.00
VW MK6 GTI RedLine 30 inHg, 30 PSI Boost Gauge
Matches 2011-2014 Mk6 GTI instrumentation. Includes gauge, 6' nylon tubing, TFSI fitting, electrical connectors, ziptiesRegular Price: $188.00
Special Price $99.00
P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – MK7 / MK7.5 Golf R - (2014-2019)
P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 SensorsRegular Price: $594.00
Special Price $534.60
Copyright © 2021, VW Central, All Rights Reserved
SAFE & SECURE SHOPPING
