Product Description

• Direct OEM replacement
• Made from the highest quality Aircraft quality T6061 billet aluminium construction
• Fully compatible with OEM electronics
• Fully serviceable piston
• Capable to 600HP (with uprated spring kit)
• Utilising world leading springs for more precise operation and consistency
• All internal and external components have been made in the UK
• Pistons use heat stabilised Viton O-rings
• Lubricated with high temperature Mobil1 grease
• Fully serviceable and rebuildable in minutes
• Unlike other valves on the market, ours produce no check engine lights (EML)
• Improved dynamic throttle response
• Consistent turbo boost & reduced turbo lag
• Covered by the Forge Lifetime Warranty*

Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered

This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!

Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.

Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!

This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐

⭐  Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐

⭐  Easy installation and sounds fantastic! Money well spent ⭐

In The Box:
1 x FMDVMK7A Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker

 

At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow. 

The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system.  Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing.  Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.

Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.

Product Details:

• Mandrel bent large bore 3.5" aluminum piping with black powder coating
• Coveted Laser etched //CTS Turbo logo
• 3.5" Reusable air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Sealed air box
• Bracketry to prevent rattling under engine torquing
• Billet SAI breather adapter and filter (Optional in drop down menu)

• 2014+ VW Golf (all models)
• 2014+ VW GTI 
• 2014+ VW Golf R
• 2018+ Audi A3 (all models)
• 2018+ Audi S3

 NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.

CONFIRM ON YOUR CAR BEFORE ORDERING!

This is a tool to remove and install the driveshaft on 2017+ 8V Audi RS3 & 8S Audi TTRS.

Use this tool to safely and effectively remove or install the driveshaft (prop shaft) in your 2017+ Audi RS3 or TT-RS. 

• Heavy duty steel construction
• Made in Canada
• Threaded to be used with most available slide-hammers (not required) 
• Based on Audi factory tool
• Easy to use, save time when working on your car
• Required when removing or installing downpipe on RS3/TT-RS
• For vehicles with slip-fit driveshaft

• Part No: ES-AS313S-VMKSB-CBS
• Diameter [in]: 3
• Material: Stainless Steel

Part No: ESAS3SVKCS RRP: $2,120.00 Diameter [in]: 3 Material: Stainless Steel FEATURES; 3″ Pipe work Brushed finish stainless steel pipe work Hot Dog resonator Polished Varex Race rear muffler Quad 4″ polished stainless tip outlet Installation instructions Download Installation Instructions

Hand Crafted from 3″ T304 Stainless Steel

Dump-Pipe & Cat Kit Part No: ESRS317KITB RRP: $1,350.00 Diameter [in]: 4 Material: Stainless Steel Suppliers Product Group: Dump and Cat FEATURES 304 stainless steel Non Polished 4″ – 3″ pipe work Stainless steel flex bellows 100 cell high flow metallic race cat Tunning pipe 3″ to twin oem size adaptor pipe Fitting kit supplied

DESCRIPTION CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler. Product Details: 60mm aluminum piping with CTS logo 5-ply silicon coupler Factory mounting points are used for perfect fitment Durable black powdercoat finish For 7-speed DSG/S-tronic transmissions only Compatible with factory and upgraded turbos Compatible with factory and upgraded intakes Compatible with factory and upgraded intercoolers Parts Included: Upper turbo outlet silicon Lower turbo outlet pipe 2 clamps Installation hardware Fitment: 2018+ VW Golf R DSG 7-speed 2019+ VW GLI DSG 7-speed 2019+ VW GTI DSG 7-speed 2018+ Audi A3 S-Tronic 7-speed 2018+ Audi S3 S-Tronic 7-speed 2018+ Audi TT, TT-S S-Tronic 7-speed NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275

Product Description

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.

·       Stainless Steel Rivets
·       Stainless Steel Fasteners
·       Carbon fabric Outer Shell
·       Calcium Magnesium Silicate Wool constructed Inner Core
·       High temperature silica fabric

The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.

Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:

• T4
• T5
• T25
• The Garrett GTX28 and GTX30 Range
• Borg Warner EFR6258

Interior Surface:

·       Max Temperature Rating: 2300°F/1260°C
·       Continuous Use Limit: 1832°F1000°C

Exterior Surface:

·       Direct Contact Limit: 1800°F/982°C
·       Radiant Heat Limit: 2500°F/1371°C

Complimentary Products

At CTS Turbo we are proud to announce our new air intake system for the MK5 R32. The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing. Our high quality silicones fit seamlessly with the OEM MAF flange allowing for smooth entry of cold air into the the engine providing peak power gains ranging from 9-15HP. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.