IE ECU Stages for your Audi B9 engine are available for stock (Stage 1) or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your Audi in a matter of minutes!
Your ECU (Engine Control Module) is a computer loaded with maps to control the operating conditions of your Audi 2.0T engine. The factory calibration is designed to function with stock installed hardware, meet new car regulated standards, and de-powered to not compete with higher performance models. IE's motorsport recalibration brings your engine to life by unleashing its full performance potential on stock hardware or to match your installed hardware upgrades while maintaining reliability and factory-like comfort. This is how your turbocharged Audi should have felt from the factory!
The IE Stage 1 Audi B9 A4 or A5 TSI tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware or to get the most out of your installed intake and intercooler. In a matter of minutes, your new ECU Tune will deliver a massive boost in performance.
Stage 1 recommended hardware
-IE Cold Air Intake
-IE Intercooler
Looking to maximize the performance of your stock engine and turbo? IE Stage 2 Upgrade fine-tunes the ECU to match installed aftermarket hardware allowing the turbocharger to breath free and improve power gains across the powerband. This is the maximum power available from a stock turbo car.
Stage 2 required & recommended hardware
-IE Performance Downpipe (required)
-IE Cold Air Intake (recommended)
-IE Intercooler (highly recommended)
Required to flash your tune, The IE POWERlink cable gives you control to unlock your engine’s true potential from your own garage or driveway. Quickly reflash your B9 Audi with your choice of ECU Stage through the cars OBD-II port. Upgrade tune stages to match installed hardware, take advantage of different fuel octanes, flash to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via data-logging.
*For all wheel drive (Quattro) vehicles only, does not support front wheel drive engines at this time.
Regular Price: $929.00
Special Price $836.00
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on All New Re-Designed Leyo Motorsports latest in-house designed Diverter Valve. Leyo Motorsport Diverter Valve multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Diverter vavle has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We are offering a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Specifications:
Made from the highest quality T6061 billet aluminium construction.
Direct OEM replacement..
Improved throttle response
Consistent turbo boost.
Reduced turbo lag .
Fully compatible with OE electronics.
Fully serviceable piston .
Holds up to 600HP. (with optional uprated spring kit)
* Note : This DV kit comes supplied with BLACK / WHITE / YELLOW Spring. Uprated BLUE / RED Spring is Available for purchase.
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on the All New Re-Designed Leyo Motorsports latest in-house designed Blow Off Valve. Leyo Motorsport Blow Off Valve's multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Blow Off Valve has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We offer a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Set yourself apart from the rest of the boosted crowd and get your vehicle the best automotive Blow Off Valve available at Leyo Motorsport.
Specifications:
Made from the highest quality T6061 billet aluminium construction.
Direct OEM replacement.
Improved throttle response.
Consistent turbo boost & Prevent boost leak.
Reduced turbo lag .
Fully compatible with OE electronics.
Fully serviceable piston .
Great sound.
Holds up to 600HP (with uprated spring kit) .
Description:
Made from T6061 billet aluminum, LEYO DSG Oil Filter Housing not only adds aesthetic appeal to the engine bay, but specially designed fin also provides effective heat dispersion for the DSG under load. Heat resistant to prolong optimum operational temperature.
*Only fits 6 speed DSG DQ250 wet.
Specifications:
T6061 Billet aluminum construction.
Hard coat anodized finish for impeccable appearance and heat resistance.
Promotes oil heat dispersion.
Description:
This MQB Cold Air Intake System for the 2.0T engine guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance
This newly designed intake can be used as both a closed or an open intake kit. Specially designed heat shield prevents heat soak, effectively extracting colder induction air.
Installation is simple and straight forward, no fabrication required.
Specifications:
OEM fitment requires no fabrication.
3.5’inch diameter for greater air induction.
Unique quality and design.
Track and dyno proven for greater horsepower gain.
Direct bolt on & easy installation.
Open or closed intake design.
Description:
LEYO Oil Catch Can Kit Plus with the new washer bottle delete integrated onto our MK7 oil catch can, owners of MK7 R and Audi S3 8V can now protect your engine with LEYO Oil Catch Can Kit Plus.
Our new washer bottle delete frees up the space taken by the top part of the washer bottle so that you have space for our Oil Catch Can. The aluminum washer bottle delete beautifully replaces the top section of the washer bottle while not disrupting the functionality of your washer.
Also known as blow-by, oil vapor is produced under load, spirited driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine.
Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO Oil Catch Can had also included pre-installed drain valve, protecting your pride and joy has never been easier.
Specifications:
Installs under factory engine cover.
Uniquely designed filtration system.
Pre-installed drain valve for easy draining.
More air comes in, more air goes out, and so the flow of energy from your turbo should not be wasted. The OEM turbo muffler is just that, a wasteful restrictive part hiding the true potential of your street or track weapon. Leyo Motorsport has in-house researched and developed its very own one piece design turbo muffler delete eliminating that inefficiency from the OEM part. Leyo Motorsport have created something special that allows greater throttle response, more aggressive power and that beautiful turbo spool in one stylish 6061 billet aluminium product. Finished in hard anodized coating, the Leyo Motorsport turbo muffler delete is the perfect companion to any engine enthusiast seeking more power.
To see the difference the Leyo Motorsport turbo muffler delete can have on your pride and joy. Be sure you are quick to order as demand is currently through the firewall.
Specifications:
Designed by Leyo and tested by the Leyo Motorsport team HQ.
Unique trumpet design for optimal flow and sound.
Machined to 0.01mm tolerance with Japanese laser technology.
Includes dual o-ring seals for prolonged turbo life.
For more efficient and cooler air flow, be sure to compliment your ride with Leyo Motorsport’s Turbo Charge Pipes.
Our in-house designed full aluminium tubing allows a less restricted path between your intercooler and turbocharger housing. When performing real time testing, our research and developers found the OEM unit was not efficient in keeping intake air traveling smoothly all the way to the Manifold. This is where Leyo Motorsport turbo charge pipes comes in. We use a heavy duty silicon hose and clamp to maintain optimal high boost flow for stage 1 to stage 3 setups in your performance vehicle with extra WMI Bung. The Leyo Motorsport turbo charge piping is larger than the OEM unit allowing for smoother performance when tuning on a dyno.
Don’t let airflow be restricted, order your unique Leyo Motorsport turbo charge pipe kit today.
Specifications:
Improved air flow from the turbo all the way through.
Removes OEM restrictions.
Pipes made from heavy duty aluminum.
Connectors made from heavy duty silicon.
Perfect for Stock & Stage 1 through to 3 performance.
2 WMI Bung.
10mm larger than OEM.
For MQB 7 speed DQ381 and 6 speed DQ250 DSG gear box.
Stock Intercooler 60mm I.D.
Aftermarket uprated intercooler core with stock diameter connector 60mm I.D.
Description:
Introducing the refreshed Leyo intake system for 8V RS3 (pre-facelift) now with a massive 4” intake pipe! For those of you shopping for a new intake, on the 8V RS3, bigger IS better. Those that says the opposite have factory intake on their cars and you listening to them?
The 8V RS3 with its gorgeous 2.5l engine is one of the most tuned cars on the market. Unleash its full potential, feed more air into it as it has been begging you to. Our new 4” piping is a tuner’s dream come true.
*This product is only for use on the race track.
*This intake does not fit the 2017+ aluminum block 8V RS3.
Specifications:
OEM fitment requires no fabrication.
Unique quality and design.
4’inch diameter for greater air induction.
Track and dyno proven for greater horsepower gain.
Increased induction sound.
Heat shield included.
Direct bolt on & easy installation.
Easy installation.
Intake Heat shield.
COMPATIBLE VEHICLES
For 2015-2017 Audi RS3 8V, does not fit the 2017+ RS3 facelift (8V.2).
Year |
Model
|
Type
|
Engine
|
2015-2017
|
RS3
|
8V
|
2.5 TFSI
|
Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!
Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.
DEVICE | PORTS | OS | PROC. | POWER | RAM |
Laptop or Tablet |
Wifi & USB |
Windows 10 or newer |
32 or 64 bit |
1.0ghz or greater |
4GB or greater |
NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.