DETAILS Our adjustable rear spat winglets will bolt directly onto our RS3 8V Sedan FL rear spats thanks to the pre-pressed in threaded brass fittings on our rear spats. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
DETAILS The Audi RS3 8V Flow-Lock Rear Diffuser makes extensive use of our Flow-Lock technology- a design system that utilises precision engineering and cutting techniques to create an integral mechanical bond. What this means for you is a durable, stylish and integrated rear setup with no visible fasteners. The perfect view for everyone behind you.
Our RS3 8V Flow-Lock Diffuser paired with rear spats and winglets work together to complete the enhanced aggression our splitter kits bring to your RS3 8V Sedan. Our rear diffuser and spat kits can be fitted without removing the rear bumper from your vehicle.
Valance is installed to the car through bolts and nuts while the Flow-Lock diffuser fins simply click into the valance (once locked into the valance it is secure). It is also possible to install when your car is on the ground.
KIT INCLUDES:
RS3 8V Sedan FL Flow-Lock Rear Diffuser
2 Flow Designs Stickers
Fitting kit
MATERIAL & FINISH:
10mm thick polyethylene composite rear valance with bevelled edges
4.5mm thick Scratch resistant textured ABS Flow-Lock Diffuser Fins
CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).
The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.
This kit features press-on style supercharger pulley. Check on your vehicle before ordering!
NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.
Kit Includes:
1 x CTS Turbo Supercharger Pulley, Press-on, 57.3mm 1 x CTS Turbo Crank Pulley, 187mm 8 x Grade 12.9 bolts 1 x Bando Serpentine Belt (Made in the USA)
CTS Turbo is proud to release our B-Cool Billet 3.0T Oil Filter Housing. The OE plastic filter housing is quite fragile and is know to become brittle and crack over time. Each CTS Turbo B-Cool Billet 3.0T Oil Filter Housing is constructed in house from T6061 Aluminum. Not only does the B-Cool filter look good, but it works great. We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil. Installation is very straight forward and only required basic hand tools. Product Details:
Made in Canada from billet T6061 Aluminum
Hard anodized black for stealth and longevity
Uses OEM O-ring
OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
Installation of CTS-HW-0243 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
Compatible with OEM Filter
The CTS B-Cool Billet 3.0T Oil Filter Housing fits Audi 3.0T equipped models such as B8 & B8.5 S4, A6 etc.
Complete the aggressive aesthetic of your RS3 8V Sedan FL rear with our rear spats - known for their durability and strength. Pre-pressed brass fittings on the rear spats allow for installation of our rear winglets to allow for further customisation to suit your individual taste.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
Our adjustable front splitter winglets will bolt directly onto our RS3 8V Sedan FL front lip splitter thanks to the pre-pressed in threaded brass fittings on our front lip splitter. Fitting kit is provided to ensure perfect fitment and can be adjusted to your liking. Adjustments can be made anywhere between 5mm-20mm on each side increasing the overall width up to 40mm!
Front Lip Splitter and front extensions sold separately.
KIT INCLUDES:
RS3 8V Sedan FL Front Lip Splitter Winglets (pair)
Supplied blanking plug gives the option of converting to a full recirculating or full vent-to-atmosphere valve
Eliminates compressor surge, even in stock applications
These new Kompact Dual Ports offer an alternative to the existing Kompact Plumb Backs for the below cars, for owners who want the sound of a Dual Port BOV, but do not require the heavier-duty performance of the larger and higher priced Type 5.
The Kompact is suited to owners of otherwise stock or mildly modified vehicles, seeking the improved performance of an Turbosmart BOV with that classic vent-to-atmosphere sound.
The existing Kompact Plumb Back for these applications is ideal for those who prefer the quieter operation of a recirculating BOV, while the Type 5 is ideal for more highly modified cars running increased boost levels.
The VAG Type 5 Smart Port Diverter Valve features innovative new drive-by-wire friendly staging technology. This eliminates compressor surge at both low throttle and high engine load while smoothly integrating with factory engine mapping. Plus a new hard-anodised, lightweight, aluminium piston provides better valve response and prolonged piston life.
Efficient bar and plate construction
- Direct bolt-in installation
- 4-ply silicon hoses and billet adapter to turbo outlet pipe
- High quality stainless steel clamps
- Low pressure drop
- Maintains factory mounting points
- No trimming of bumper or crash supports
- Rated for power levels in excess of 600HP
- Core dimensions: 23.00 Length x 2.00" Tall x 16.5" Height
- Cast aluminium end tanks with mounting points that are CAST into the end tank, NOT welded like inferior intercoolers
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.
OBD Multi-Gauge Features:
Boost and Vacuum from OBD2 port
Plug and Play install – just plug into your obd2 port and install into dash!
Optional analog sensor for reading boost on tuned/big turbo cars.
OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more!
Optional Auto-Dim or Manual Dimmer
Code Read/Clear
2 x universal 0-5v linear analog inputs
Includes Digital Display, Custom OBD Wire Harness, Control Box.
Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included.
Applicable Models:
Audi TT MK2 / RS