Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all!
CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA
Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance.
We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation.
Features:
CAD optimized for maximum flow, 56% larger than factory
Cast aluminum throttle body elbow, billet aluminum spacer
CNC machined in house for perfect fitment
Direct replacement for factory parts between the cold side of the intercooler and the throttle body
HP gain of up to 20hp on stock turbo, even more with big turbo upgrades
Compatible with factory intake, CTS Turbo intakes and most other popular intakes (not compatible with Eventuri intake)
Compatible with factory and aftermarket intercoolers
Includes a large-bore 2.75″ charge pipe and custom silicone couplers
Two extra 1/8″ NPT bungs on the charge pipe for watermeth nozzles
Compatible with 1-bolt and 2-bolt pressure sensors
DV flange is based on factory design
Includes hoses and fittings to install on 2019+ DNWA engines
Fitment:
8V and 8V.2 Audi RS3 (2018-2020) – DAZA and DNWA models
The IE MQB HPFP upgrade kit unlocks fuel delivery for ethanol, larger turbos, and our TrueFlex ECU tunes for the VW & Audi MK7 & 8V 2.0T Gen 3 engines. The piston and cylinder assembly is the largest volume possible within the stock fuel pump body. Top-quality components and our strict QC process ensure extreme reliability. Increase your fueling overhead and enjoy worry-free HPFP operation for your MQB 2.0L turbocharged engine.
DESIGN
INSTALL & FITMENT
LEADING FEATURES
Highest flowing MQB HPFP upgrade on the market
HPFP upgrade for ethanol & larger turbo tunes
Fueling support for IE TrueFlex & ethanol tunes
Reliably adds a larger fuel ceiling for increased flow
The piston diameter increased from 9.92mm to 11.68mm
Stroke volume increased from 231mm^3 to 321mm^3
Broken-in and bench tested on in-house pump dyno
Constant diameter piston design for long-life operation
Tool steel DLC coated pin
Nitrided tool steel cylinder
Molybdenum disulphide impregnated leak-free seal
Stainless steel seal body
Buna-N rubber oil resistant o ring
Engineered, designed, & manufactured in the USA
ADDED DISPLACEMENT
Your HPFP is an integral part of the MQB platform direct injection (DI) system and provides exceptionally high-pressure fuel (exceeding 2900psi) to the injectors. When running turbo upgrades or ethanol fuel, the stock HPFP internal volume becomes the limiting factor when increasing power. IE’s HPFP internals install into your factory pump housing and increase the bore and piston size of the pump internals, allowing more flow, delivering more fuel, and allowing for more horsepower & torque.
FLOW TESTING
Upgrading to IE’s HPFP reliably increases the flow rate of the high-pressure pump for more tuning headroom to increase power safely. The result is a maximum gain of 38.58% over stock!
RELIABILITY
Every piston and cylinder is CNC machined to exacting sizes, assembled, and measured as a matching set in-house. Tolerances are hand-verified using specialized measurement tools and verified down to 0.00005 of an inch to ensure reliability and proper function. These extreme manufacturing and QC processes are the foundation that has built IE’s leading reputation in HPFP reliability and the popular choice for anyone wanting worry-free operation.
Engineered & manufactured in the USA
PUMP DYNO VERIFICATION
IE HPFP designs are verified and torture-tested on our own application-specific fuel pump dyno. This machine is able to replicate countless miles and various RPM situations to substantiate every detail of the HPFP design. This strict engineering process, combined with our 100% in-house CNC machining, obsessed quality control, and top-shelf components is why IE HPFP Kits have earned their esteem and reputation for reliability.
INCLUDED LIMITED WARRANTY
Due to the extreme machining and coating tolerances, Integrated Engineering offers a limited warranty on this product: Six months from the day of purchase (unlimited miles) for MQB internal HPFP kits.
DLC COATED
DLC (diamond-like carbon coating) is an advanced coating process applied to the tool steel pin. This coating combines hardness and low friction, providing excellent wear properties and self-lubrication behavior that drastically extends pin life.
CONSTANT DIAMETER PIN
Many aftermarket HPFP options use a stepped-diameter piston in a cost-saving effort to reuse the factory seal. This design dramatically reduces the contact between the pin and cylinder, causing instability of the pin stroke leading to increased wear. IE’s uniquely designed constant diameter pinmaintains its larger size through the entire piston shaft. This engineering detail increases the contact between the pin and cylinder by over 50% compared to kits which do not replace the seal and nut, increasing pin stability.
NITRIDED CYLINDER
The cylinder can see up to 19000 strokes a minute with an astonishingly thin tolerance and is lubricated by fuel only. Our tool steel cylinder is nitrided to guarantee it can withstand this torture. This advanced process infuses nitrogen atoms into the atomic structure of the outer surface of the component, increasing surface hardness and wear properties drastically. The thickness and quality of every nitride production batch are independently verified in a specialty lab.
TITANIUM RETAINER
Our ultra-lightweight FEA optimized titanium retainer reduces the chance of valve float while securing the spring to the new IE pump assembly. The internal kit is designed correctly for the factory spring rate, avoiding the need for a stiffer spring that adds unnecessary pressure and wear on the camshaft.
LEAK-FREE SEAL
A custom CNC Machined nut holds our molybdenum disulphide impregnated PTFE seal, which is ideal for reducing friction and maintaining stiffness. The seal is spring energized to increase reliability and provide constant outward pressure. The body is sealed to the pump with a quality Buna-N rubber o ring, ensuring it will hold up against heat and a wide range of fuels. What may seem like minor features add up to ensure long life and trouble-free operation.
Are you sick and tired of plugging your Apple iPhone into the USB port every time you get into your car.
At VW Central we have found the solution for factory fitted vehicles. Simply plug our USB adapter into the factory USB port and it will use Bluetooth to make a wireless connection with your vehicle.
Plug and Play. No coding required.
Please note this will not work if your vehicle doesn’t already have factory fitted CarPlay functionality.
Suitable for VW Vehicles 2016+
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Ball for low friction and long life
Elminate sway bar flex for consistent handling
Spanner provision for on-car adjustment
Suitable for application on lowered or raised vehicles
Features and Benefits: - 6060-T5 Alloy Link Ball for low friction and long life - Spanner provision for on-car adjustment - Eliminates sway bar link flex - Allows for neutral sway bar positioning - Maximises all positions on adjustable Sway Bars - Suits lowered or raised vehicles - SuperPro Tip To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
OBDeleven with 12 month PRO Plan OBDeleven becomes a professional diagnostic tool. Operating with easy to use application it allows to fully access all car systems, program, monitor and activate various functions via your iOS, Android, and Huawei devices.
Official and licensed full-featured software is constantly updated with new features. The programming temporarily is not supported on models that are manufactured from 2020 and have SFD protection. The negotiation regarding the support of these models is in progress.
Pack includes:
Next generation device
12 month PRO Plan
200 credits
Pro Plan and 200 credits will be sent to your email
Frequently Asked Questions:
Q. What vehicles are supported with One-Click-Apps by OBDeleven A. Please refer to OBDeleven Official Supported Vehicles Page
Q. Are OBDeleven credits included? A. Yes, the Pro Pack includes 200 Credits with the kit, and provides you with 12 months access on their PRO Plan
Q. What vehicles are supported with this device? A. Vehicles built after 1996 that are Audi, Volkswagen, Seat, Lamborghini, Bentley and Skoda models are supported.
Q. How do I know what tweaks or modifications I can code for my vehicle. A. We do not provide support with the coding and adaptation, there are many YouTube guides for VCDS & OBDeleven: Here is an example of someMK7 Coding and Adaptationavailable for your OBDeleven device Q. Does this product require an internet connection? A. Yes, an internet connection is required whilst using the OBDeleven device. We recommend having good reception and a strong signal to ensure a stable connection with their servers.
Q. If I require assistance with this product who do I contact? A. OBDeleven have a dedicatedsupport area
Q. Will any changes I do to my vehicle with OBDeleven have any effect on my factory vehicle warranty? A. Any form of modification may impact your warranty. VW Central will not take any responsibility for damage caused by using the OBDeleven device.
Q. Where do I find the OBDeleven App? A. The OBDeleven App is available on both the Apple App Store or for Android Users on the Google Play Store.
The CTS Runner Flap Delete allows for the removal of the restrictive intake flappers from the factory intake manifold.
The factory intake flappers can be a substantial restriction in modified vehicles, the CTS RFD is a must for any FSI owner that wants to minimize airflow restrictions and maximize power to the ground.
For EA888.1 Gen 1 TSI models (2009-2013)
- Mandrel bent aluminum piping with black powder coating
- CNC machined MAP flange - DV relocation/noise pipe bung
- 4 Ply silicon connectors with stainless steel clamps
- Integrated water methanol bung with plug
- Stainless steel clamps