You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Audi - Integrated Engineering

Set Descending Direction

   

Items 1 to 10 of 48 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. IE Audi 3.0T Cold Air Intake | Fits 8R SQ5 & Q5

    UNIQUELY ENGINEERED

    This is not another mass produced "filter on a stick". IE's cold air intake has been specifically engineered and developed using professional racing design aspects and specialized computational flow dynamic software. The result is a true Motorsport intake system that sounds and performs for the track with a sophisticated and classy design.

    EASY POWER

    The ram air design, built-in velocity stack, and our massive 5-inch filter inlet help deliver the most HP possible from a cold intake system. Expect peak gains of 15-20+HP/TQ on tuned engines.

    DESIGN FEATURES

    INCREASED AIR FLOW

    Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE's intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds AWESOME too!

    HIGH-FLOW VELOCITY STACK

    Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.

    PRECISION FIT

    This Intake fits Audi 8R SQ5 & Q5 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.

    QUALITY COMPONENTS

    IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.

    VEHICLE FITMENT GUIDE:

    MAKE MODEL YEAR ENGINE

    AUDI

    SQ5

    2014-2017 8R

    3.0T Supercharged

    AUDI

    Q5

    2009-2017 8R

    3.0T Supercharged

  2. IE Carbon Fiber Intake System For Audi C8 RS6 & RS7

    Description

    The IE Carbon Fiber Intake System for your Audi C8 RS6 or RS7 has been engineered for performance first through extensive airflow analysis and design testing. Get ready to experience massive real-world power and torque with 60-70HP gains on tuned engines! Elevate your driving experience by releasing the unique turbo and engine sound, bringing your twin-turbocharged V8 powerhouse to life!

    $3,599.00
  3. IE High Pressure Fuel Pump (HPFP) Upgrade Kit For VW & Audi MQB 2.0T Engines| Fits MK7 & 8V EA888 Gen 3

    Description

    The IE MQB HPFP upgrade kit unlocks fuel delivery for ethanol, larger turbos, and our TrueFlex ECU tunes for the VW & Audi MK7 & 8V 2.0T Gen 3 engines. The piston and cylinder assembly is the largest volume possible within the stock fuel pump body. Top-quality components and our strict QC process ensure extreme reliability. Increase your fueling overhead and enjoy worry-free HPFP operation for your MQB 2.0L turbocharged engine.

    • DESIGN
    • INSTALL & FITMENT

    LEADING FEATURES

    • Highest flowing MQB HPFP upgrade on the market
    • HPFP upgrade for ethanol & larger turbo tunes
    • Fueling support for IE TrueFlex & ethanol tunes
    • Reliably adds a larger fuel ceiling for increased flow
    • The piston diameter increased from 9.92mm to 11.68mm
    • Stroke volume increased from 231mm^3 to 321mm^3
    • Broken-in and bench tested on in-house pump dyno
    • Constant diameter piston design for long-life operation
    • Tool steel DLC coated pin
    • Nitrided tool steel cylinder
    • Molybdenum disulphide impregnated leak-free seal
    • Stainless steel seal body
    • Buna-N rubber oil resistant o ring
    • Engineered, designed, & manufactured in the USA

    ADDED DISPLACEMENT

    Your HPFP is an integral part of the MQB platform direct injection (DI) system and provides exceptionally high-pressure fuel (exceeding 2900psi) to the injectors. When running turbo upgrades or ethanol fuel, the stock HPFP internal volume becomes the limiting factor when increasing power. IE’s HPFP internals install into your factory pump housing and increase the bore and piston size of the pump internals, allowing more flow, delivering more fuel, and allowing for more horsepower & torque.

    FLOW TESTING

    Upgrading to IE’s HPFP reliably increases the flow rate of the high-pressure pump for more tuning headroom to increase power safely. The result is a maximum gain of 38.58% over stock!

    RELIABILITY

    Every piston and cylinder is CNC machined to exacting sizes, assembled, and measured as a matching set in-house. Tolerances are hand-verified using specialized measurement tools and verified down to 0.00005 of an inch to ensure reliability and proper function. These extreme manufacturing and QC processes are the foundation that has built IE’s leading reputation in HPFP reliability and the popular choice for anyone wanting worry-free operation.

    Engineered & manufactured in the USA

    PUMP DYNO VERIFICATION

    IE HPFP designs are verified and torture-tested on our own application-specific fuel pump dyno. This machine is able to replicate countless miles and various RPM situations to substantiate every detail of the HPFP design. This strict engineering process, combined with our 100% in-house CNC machining, obsessed quality control, and top-shelf components is why IE HPFP Kits have earned their esteem and reputation for reliability.

    INCLUDED LIMITED WARRANTY

    Due to the extreme machining and coating tolerances, Integrated Engineering offers a limited warranty on this product:
    Six months from the day of purchase (unlimited miles) for MQB internal HPFP kits.

    DLC COATED

    DLC (diamond-like carbon coating) is an advanced coating process applied to the tool steel pin. This coating combines hardness and low friction, providing excellent wear properties and self-lubrication behavior that drastically extends pin life.

    CONSTANT DIAMETER PIN

    Many aftermarket HPFP options use a stepped-diameter piston in a cost-saving effort to reuse the factory seal. This design dramatically reduces the contact between the pin and cylinder, causing instability of the pin stroke leading to increased wear. IE’s uniquely designed constant diameter pinmaintains its larger size through the entire piston shaft. This engineering detail increases the contact between the pin and cylinder by over 50% compared to kits which do not replace the seal and nut, increasing pin stability.

    NITRIDED CYLINDER

    The cylinder can see up to 19000 strokes a minute with an astonishingly thin tolerance and is lubricated by fuel only. Our tool steel cylinder is nitrided to guarantee it can withstand this torture. This advanced process infuses nitrogen atoms into the atomic structure of the outer surface of the component, increasing surface hardness and wear properties drastically. The thickness and quality of every nitride production batch are independently verified in a specialty lab.

    TITANIUM RETAINER

    Our ultra-lightweight FEA optimized titanium retainer reduces the chance of valve float while securing the spring to the new IE pump assembly. The internal kit is designed correctly for the factory spring rate, avoiding the need for a stiffer spring that adds unnecessary pressure and wear on the camshaft.

    LEAK-FREE SEAL

    A custom CNC Machined nut holds our molybdenum disulphide impregnated PTFE seal, which is ideal for reducing friction and maintaining stiffness. The seal is spring energized to increase reliability and provide constant outward pressure. The body is sealed to the pump with a quality Buna-N rubber o ring, ensuring it will hold up against heat and a wide range of fuels. What may seem like minor features add up to ensure long life and trouble-free operation.

    $738.00
  4. IE Polymer Air Intake System For Audi B9/B9.5 S4 & S5 3.0T

    Description

    LEADING FEATURES

    • Rotomold polymer for superior heat resistance
    • Up to 19HP & 21ft-lbs over stock (with software)
    • Flow 37% more than the factory airbox
    • Flow 61% more than stock with IE turbo inlet
    • Increased turbo & engine sounds
    • Maximized turbo & engine efficiency
    • Huge 5″ air filter for excellent laminar flow
    • Integrated velocity stack for smooth airflow
    • High pressure & low pressure air zones
    • Designed for stock turbo and hybrids (with IE turbo inlet)
    • Factory style mounts for reliable & easy installation
    • All stainless hardware
    • Multi-ply silicone with stop-flat edges
    • High-quality clamps
    • Powder-coated aluminum filter plate & velocity stack
    • Stainless laser-etched logo plate

    POLYMER AIRBOX

    A special rotomold process is used to manufacture our premium polymer 3.0T intake airbox. This method leverages complex shapes and angles to maximize internal volume for air supply and smooth flow for a true performance design. This molding style also produces consistent wall thickness, strong corners, and superior heat resistance for a cost-friendly intake without compromises.

    SEAMLESS DESIGN

    The entire intake is designed as a single-piece airbox to offer a seamless and complete look with an above factory quality fit and finish.

    BUILT-IN VELOCITY STACK

    Our motorsport-designed velocity stack creates a smooth transition from the large filter area to the turbo inlet with excellent laminar properties. This uniquely engineered detail produces a high inertia flow with reduced drag and power-robbing turbulence.

    TURBO INLET UPGRADE

    Adding the optional cast turbo inlet upgrade further reduces significant air restrictions while maintaining the largest size possible from the airbox to the turbocharger. The intake and turbo inlet further increases airflow from 37% (intake only) up to a combined 61% over stock!

    Turbo inlet pipe is an optional upgrade and can be purchased with your intake or added at a later date.

    HYBRID TURBO READY

    The intake and turbo inlet designs offer a straightforward and bolt-in job of available hybrid turbo upgrades. Our turbo-specific CNC-machined and o ring sealed adapters always maintain the largest size possible without introducing flow restrictions. Upgrading to a TTE or Pure Turbo hybrid is easy, simple, and hassle-free.

    Hybrid turbo adapter rings are sold separately from the turbo inlet upgrade.

    IE 3.0T INTAKE SYSTEM & TURBO INLET PIPE INSTALLED WITH TTE810 TURBO ON WORLD-RECORD 9-SECOND B9 S4

     

    HIGH-FLOW PRESSURE ZONES

    IE’s multi-zone intake design delivers all the performance benefits of an open-filter intake while maintaining protection from hot engine bay air from under the hood. A constant ram air supply is forced in from the grille inlet, while any additional air demands are supplied from the low-pressure zone through the filter plate louvers. This dual-zone approach ensures airflow demands for any power level, even the most extreme builds.

    TURN UP THE FUN

    The byproduct of a true performance-designed intake is more than power. Our uniquely engineered velocity stack, pressure zones, and extensive internal volume also work together to release a myriad of turbo spools, engine throttle, and diverter blow-off sounds that transform your S4 or S5 with the under-hood acoustics of a genuine sports car.

    PRECISION DESIGN

    3D scanning tools are leveraged to create a high-resolution digital environment. This technology allows IE engineers to use all available space for a complete performance design while ensuring a hassle-free fit and installation.

    Our cost-effective intake without compromising quality or performance.

    EASY INSTALLATION

    Install your new air intake using basic hand tools in no time. Our thermoplastic intake utilizes factory-style mounts that ensure a perfect and hassle-free fit.

    Install time: 20 – 45 minutes

    $999.00
  5. IE VW & Audi 2.0T Intake Manifold | Fits FSI & TSI Gen1/2 Engines

    A TRUE PERFORMANCE MANIFOLD

    Gain power and torque across the entire rpm range with no loss in turbo spool time with a true motorsport designed intake manifold for your VW or Audi 2.0T FSI EA113 & TSI EA888 Gen1/2 engine. The IE 2.0T Intake Manifold has been carefully designed to provide an effective power increase across the entire rpm range with no loss in low-end power or spool time with the ability to be used on any turbo setup, including the stock turbo. This manifold completely replaces the factory failure prone and restrictive plastic manifold with a high-performance USA cast aluminum part that will look amazing, last the life of the vehicle, and add more power! 

    LEADING INTAKE MANIFOLD FEATURES

    • Power and torque gains throughout the entire rpm range
    • Fast onset boost, no loss in spool time
    • O ring seals, no liquid gasket or RTV required
    • No wiring modifications or extensions required
    • Thick wall cast construction for durability
    • Black anodized velocity stack cover
    • Black powder-coat finish for a clean look and easy maintenance
    • 100% engineered, tested, designed, cast, and machined in the USA
    • Bolt-on install kits available for most vehicles

    VEHICLE SPECIFIC INSTALL KITS

    Designed specifically for each individual application, IE Intake Manifold Install Kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. These kits including all needed brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather, vacuum connections, and throttle body. Verify the correct install kit for your vehicle below before ordering.

    2.0T FSI (EA113) TRANSVERSE KIT FITMENT

    • VW - MK6 Golf R (2012-2013)
    • VW - MK5 GTI 2.0T FSI (2006-2008)
    • VW - MK5 Jetta & GLI 2.0T FSI (2005-2008)
    • AUDI - 8J/MK2 TTS (2009-2015)
    • AUDI - 8J/MK2 TT 2.0T FSI (2008-2010)
    • AUDI - 8P/MK2 A3 2.0T FSI (2006-2008)

    2.0T FSI (EA113) LONGITUDINAL KIT FITMENT

    • AUDI - B7 A4 2.0T FSI (2005-2008)

    2.0T TSI (EA888 GEN 1 & GEN 2) TRANSVERSE KIT FITMENT

    • VW - MK6 GTI 2.0T TSI (2010-2014)
    • VW - MK5 GTI 2.0T TSI (2008-2010)
    • VW - MK6 Jetta & GLI 2.0T TSI (2011-2013)
    • VW - MK5 Jetta & GLI 2.0T TSI (2008-2011)
    • AUDI - 8J/MK2 TT 2.0T FSI (2010-2015)
    • AUDI - 8P/MK2 A3 2.0T FSI (2008-2013)

    2.0T TSI (EA888 GEN 1 & GEN 2) LONGITUDINAL KIT FITMENT

    • AUDI - B8 A4 2.0T TSI (2009-2013)
    • AUDI - B8 A5 2.0T TSI (2009-2013)

    REQUIRES MANIFOLD ECU SOFTWARE

    The IE 2.0T Intake Manifold is a true performance designed intake manifold and requires specific tuning to the ECU software to take advantage of the larger plenum volume, runner size, resonance tuning, and velocity stacks to gain the power increase. Simply bolting the manifold on your existing ECU tune is unlikely to gain the optimum power available. Additionally, installing the IE manifold will remove the factory plastic manifold's runner flaps. Removing the runner flaps will cause a check engine light (CEL) and possible rough cold starts, especially in cold weather. Your manifold tune must turn off the runner flap codes to remove the CEL and re-tune the warm-up maps to accommodate for the cold starts. Please ensure your ECU tuner can provide you with manifold software before purchasing.

    Vehicle specific manifold tunes are available from IE for certain cars with more being added in the future. See below for a list of available software tunes.

    • VW MK5 GTI Stage 2 IM Software
    • VW MK6 GTI Stage 1 IM Software
    • VW MK6 GTI Stage 1 IM Software
    • VW MK6 Golf R Stage 2 Pro IM Software

    USA CAST ALUMINUM

    IE manifolds are cast from a special self-aging, self-hardening alloy with especially strict requirements for chemical composition. Top of the line Japanese machining centers machine all major surfaces of the parts in one setup, ensuring a perfect fit, finish, and maximum value. The aluminum manifold makes a great replacement for the stock plastic unit, which is a common failure point.

    FLOW TUNED RUNNER DESIGN & VELOCITY STACKS

    Dramatic power and torque increases come from making small changes to the runner and velocity stack design. Our engineers have precisely tuned runner length, diameters, and resonance tuning. The IE manifold is the only manifold on the market featuring flow tested velocity stacks that have been optimally tuned for large power increases throughout the entire RPM band. The end result is the best performing intake manifold optimized specifically for 2.0T engines.

    INCREASED PLENUM VOLUME

    The plenum on this manifold has been generously sized and shaped to distribute airflow as evenly as possible to all 4 cylinders. The 2.4L internal volume is a massive improvement over the factory piece and ensures a steady supply of air for the engine.

    POWER INCREASE

    We have carefully engineered and tested this intake manifold in-house to get the best results possible in any condition. Using the latest in Computational Fluid Dynamics (CFD) software, our engineers have optimized the manifold's airflow and power range for virtually any turbocharger. Even on smaller turbos such as VW/Audi K04 turbos, there are significant power and torque increases throughout the entire rpm range, with no loss in low-end power or spool time. What that means for you is an incredible increase in the driving experience with a bolt-on performance product, with truly no downsides. Larger power gains are to be seen on big turbo setups as well, with a manifold that is tuned for the natural powerband of the 2.0T engines from 3000-7500rpm.

    QUICK SPOOL

    With further careful tuning of the runner diameter and length, the IE manifold provides an optimal balance of power gains throughout the entire powerband with no loss in spool time or low-end power. Even on both smaller and larger turbo setups, the manifold will typically result in no added turbo lag.

    DIRECT FIT

    The Integrated Engineering 2.0T performance intake manifold has been carefully designed to fit many 2.0T FSI/TSI (EA113 & EA888 gen1/gen2) engines while retaining all of your factory components. Through extensive research and development, this intake manifold fits with no modifications to the engine bay, charge piping, vacuum system, emissions systems, fuel system, or coolant system. To make the intake manifold install as painlessly as possible, individual install kits are available separately. Check the Fitment tab to find the install kit for your vehicle.

    SURFACE FINISH

    To complement the impressive performance of the manifold design, IE engineers have taken special care to make a visually appealing piece that not only compliments but enhances the look of any engine bay. The beautiful USA cast aluminum surface is powder coated with a satin black finish then all surfaces and ports are machined for an impeccable contrast. The easy to clean powder coat will ensure the manifold stays looking nice for a lifetime. The top of the manifold features an in-house CNC machined black anodized aluminum velocity port cover that looks amazing in any engine bay.

    PRECISION ENGINEERING

    Unlike other manifolds on the market that are simply welded or cast with larger plenums and made to fit on the car, IE's performance intake manifolds receive special treatment from start to finish. Our engineering department looks at each specific application and designs an intake manifold with a properly sized runner and plenum. Then we begin a series of prototyping and testing countless revisions to the design to ensure optimum performance. Our engineers use Computational Fluid Dynamics (CFD) software to optimize the runner and velocity stack (bellmouth) system for proper resonance tuning and airflow. Unlike competitor manifolds, we use this process on each manifold to design the application-specific runner system to maximize airflow delivery to the cylinders.

    Once the manifold has been designed and flow has been optimized, the 3D models head over to our 3D printing studio to manufacture the initial prototype. The 3D printed manifold is fastened onto our in-house engine dynamometer and in-house chassis dynamometer for testing. To validate the plenum, runner, and bellmouth design, we test each revision in a controlled environment. Once all the testing data has been collected, it is analyzed and used to determine if changes are necessary before going into production.

    WATER/METHANOL READY

    Each runner is ready for individual water/methanol injection nozzles. The cast and pre-drilled and threaded 1/8" NPT ports located on each runner will make installing your water/meth setup easy. For builds not using water/methanol injection, you can simply block off the ports using the provided black plugs. This requires a 1/8" thread "elongated" nozzle to use with our manifold. These nozzles are manufactured by Aquamist and available through aquamist-direct.com for purchase.

    VEHICLE FITMENT BY ENGINE

    Requires vehicle specific install kit for complete installation.

    VW & Audi - 2.0T FSI EA113 Engines

    • Audi - A4 2005-2008 (B7) 2.0T EA113 TFSI engines
    • Audi - A6 2005-2011 (C6) 2.0T EA113 TFSI engines
    • Audi - A6 Allroad 2005-2011 (C6) 2.0T EA113 TFSI engines
    • Audi - TT 2008-2015 (MK2 - 8J) 2.0T EA113 TFSI engines
    • Audi - TTS 2008-2015 (MK2-8J) 2.0T EA113 TFSI engines
    • Audi - A3 2006-2013 (MK2 - 8P) 2.0T EA113 TFSI engines
    • VW - Golf R 2012-2013) (MK6) 2.0T EA113 FSI/TSI engines
    • VW - GTI 2006-2009 (MK5) 2.0T EA113 FSI engines
    • VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T EA113 FSI engines
    • VW - Passat 2006-2010 (B6) 2.0T EA113 FSI engines

    VW & Audi - 2.0T TSI EA888 Gen 1/2 Engines

    • Audi - A4 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen 1/2 engines*
    • Audi - A4 Allroad 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen 1/2 engines*
    • Audi - A5 2008-2015 (B8 - B8.5) 2.0T TSI EA888 Gen 1/2 engines*
    • Audi - A6 2012-2015 (C7 - C7.5) 2.0T TSI EA888 Gen 1/2 engines*
    • Audi - TT 2008-2015 (MK2 - 8J) 2.0T TSI EA888 Gen 1/2 engines*
    • Audi - A3 2006-2013 (MK2 - 8P) 2.0T TSI EA888 Gen 1/2 engines*
    • VW - GTI 2006-2009 (MK5) 2.0T TSI EA888 Gen 1/2 engines*
    • VW - GTI 2010-2014 (MK6) 2.0T TSI EA888 Gen 1/2 engines*
    • VW - Jetta & Jetta GLI 2010-2014 (MK6) 2.0T TSI EA888 Gen 1/2 engines*
    • VW - SportWagen 2011-2014 (MK6) 2.0T TSI EA888 Gen 1/2 engines*
    • VW - CC 2009-2015 (3C8) 2.0T TSI EA888 Gen 1 & 2 engines*
    • VW - Passat 2006-2010 (B6) 2.0T TSI EA888 Gen 1 & 2 engines*

    *Does not fit B8/B8.5 A4 & A5 2.0T TSI engines with 5th injector factory aluminum intake manifolds.

    *Fits VW & Audi 2.0T FSI EA113 and TSI EA888 Gen 1/2 engines only, does not fit MK7/MQB EA888 Gen 3 engines.

  6. IE ADJUSTABLE CAMBER PLATES FOR MK5/MK6/8P/8J CHASSIS

    Integrated Engineering camber plates excell when ensuring that the tire's contact patch is flat on the pavement under hard cornering. This is essential to maximizing grip levels dialing in the required amount of negative camber (leaning the tire in) for your specific tire and suspension combination. Higher grip levels cause further body roll and suspension deflection and this requires more camber. These Integrated Engineering camber plates allow maximum adjustability of camber. They also provide a stable foundation for your front suspension by replacing the compliant rubber OEM mounts with a steel bearing, eliminating unwanted movement under heavy loads.

    $1,039.00
  7. IE FSI/TSI/TFSI FDS PERFORMANCE INTERCOOLER KIT | FITS MK5 & MK6 GTI / MK6 R | AUDI A3 S3 8P

    The Integrated Engineering MK5/MK6 FDS intercooler system was built from the ground up to offer the ultimate in performance for your vehicle. When increasing the power output of your engine it is extremely important to ensure it has the proper cooling to match. It packs a very large intercooler core into the space available, a full 54% larger than the OEM core. This large core delivers cool air to the engine under all circumstances, increasing power and torque and simultaneously reducing heat soak.  

    $1,899.00
  8. IE PCV SOLUTION KIT FOR 2.0T FSI ENGINES - IEBAVC17

    One of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure, but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.

  9. IE 2.0T FSI Catch Can Kit For IE Billet Valve Cover | Fits MK5, MK6 Golf R, Mk2 TTS

    This recirculating catch can kit has been designed for use with the IE billet valve cover (IE part number: IEBAVC5as a simple install solution for your billet valve cover and catch can. 
    IE billet valve cover sold separately. 

     

    Product Features

    • Easy install catch can and valve cover kit

    • Complete kit, ready to install

    • Installs with IE billet valve cover (sold separately)

    • All components are black for a sleek stealth install

    • Braided stainless steel/Nylon hose

     

    $1,016.00
  10. IE Billet Valve Cover for 2.0T FSI Engines

    Update the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!

    PRODUCT DETAILS

    IE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.

    MACHINED DESIGN

    Machined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.

    FOR USE WITH CUSTOM CATCH CAN SETUPS ONLY

    This valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.

    PRODUCT FEATURES

     

    • Replaces factory plastic valve cover
    • Uses factory valve cover gasket
    • In-house CNC machined from aluminum
    • Includes o ring sealed matching billet oil cap
    • -10AN breather outlet for catch can setups

    ADDITIONAL PARTS REQUIRED

     

    EVAP CROSSOVER TUBE RELOCATION KIT

    The factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. IE Part Number: IEBAVC11


    CATCH CAN KIT FOR BILLET VALVE COVER

    The IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. IE Part Number: IEBACC3

     

    VEHICLE FITMENT

    • Audi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines
    • Audi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines
    • Audi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines
    • Audi - TT 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines*
    • Audi - TTS 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines
    • Audi - A3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines*
    • Audi - S3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines
    • VW - GTI 2006-2009 (MK5) 2.0T FSI (EA113) engines*
    • VW - Golf R 2012-2012 (MK6) 2.0T FSI (EA113) engines
    • VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T FSI (EA113) engines*
    • VW - Passat 2006-2010 (B6) 2.0T FSI (EA113) engines*
    • VW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*

    *This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1/Gen2 TSI engine and is not compatible with billet valve covers.

    $1,045.00
Set Descending Direction

   

Items 1 to 10 of 48 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5