You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Audi - Integrated Engineering

Set Descending Direction

   

Items 1 to 10 of 15 total

  1. 1
  2. 2
  1. IE Polymer Air Intake System For Audi B9/B9.5 S4 & S5 3.0T

    Description

    LEADING FEATURES

    • Rotomold polymer for superior heat resistance
    • Up to 19HP & 21ft-lbs over stock (with software)
    • Flow 37% more than the factory airbox
    • Flow 61% more than stock with IE turbo inlet
    • Increased turbo & engine sounds
    • Maximized turbo & engine efficiency
    • Huge 5″ air filter for excellent laminar flow
    • Integrated velocity stack for smooth airflow
    • High pressure & low pressure air zones
    • Designed for stock turbo and hybrids (with IE turbo inlet)
    • Factory style mounts for reliable & easy installation
    • All stainless hardware
    • Multi-ply silicone with stop-flat edges
    • High-quality clamps
    • Powder-coated aluminum filter plate & velocity stack
    • Stainless laser-etched logo plate

    POLYMER AIRBOX

    A special rotomold process is used to manufacture our premium polymer 3.0T intake airbox. This method leverages complex shapes and angles to maximize internal volume for air supply and smooth flow for a true performance design. This molding style also produces consistent wall thickness, strong corners, and superior heat resistance for a cost-friendly intake without compromises.

    SEAMLESS DESIGN

    The entire intake is designed as a single-piece airbox to offer a seamless and complete look with an above factory quality fit and finish.

    BUILT-IN VELOCITY STACK

    Our motorsport-designed velocity stack creates a smooth transition from the large filter area to the turbo inlet with excellent laminar properties. This uniquely engineered detail produces a high inertia flow with reduced drag and power-robbing turbulence.

    TURBO INLET UPGRADE

    Adding the optional cast turbo inlet upgrade further reduces significant air restrictions while maintaining the largest size possible from the airbox to the turbocharger. The intake and turbo inlet further increases airflow from 37% (intake only) up to a combined 61% over stock!

    Turbo inlet pipe is an optional upgrade and can be purchased with your intake or added at a later date.

    HYBRID TURBO READY

    The intake and turbo inlet designs offer a straightforward and bolt-in job of available hybrid turbo upgrades. Our turbo-specific CNC-machined and o ring sealed adapters always maintain the largest size possible without introducing flow restrictions. Upgrading to a TTE or Pure Turbo hybrid is easy, simple, and hassle-free.

    Hybrid turbo adapter rings are sold separately from the turbo inlet upgrade.

    IE 3.0T INTAKE SYSTEM & TURBO INLET PIPE INSTALLED WITH TTE810 TURBO ON WORLD-RECORD 9-SECOND B9 S4

     

    HIGH-FLOW PRESSURE ZONES

    IE’s multi-zone intake design delivers all the performance benefits of an open-filter intake while maintaining protection from hot engine bay air from under the hood. A constant ram air supply is forced in from the grille inlet, while any additional air demands are supplied from the low-pressure zone through the filter plate louvers. This dual-zone approach ensures airflow demands for any power level, even the most extreme builds.

    TURN UP THE FUN

    The byproduct of a true performance-designed intake is more than power. Our uniquely engineered velocity stack, pressure zones, and extensive internal volume also work together to release a myriad of turbo spools, engine throttle, and diverter blow-off sounds that transform your S4 or S5 with the under-hood acoustics of a genuine sports car.

    PRECISION DESIGN

    3D scanning tools are leveraged to create a high-resolution digital environment. This technology allows IE engineers to use all available space for a complete performance design while ensuring a hassle-free fit and installation.

    Our cost-effective intake without compromising quality or performance.

    EASY INSTALLATION

    Install your new air intake using basic hand tools in no time. Our thermoplastic intake utilizes factory-style mounts that ensure a perfect and hassle-free fit.

    Install time: 20 – 45 minutes

    $999.00
  2. IE 2.0T FSI Catch Can Kit For IE Billet Valve Cover | Fits MK5, MK6 Golf R, Mk2 TTS

    This recirculating catch can kit has been designed for use with the IE billet valve cover (IE part number: IEBAVC5as a simple install solution for your billet valve cover and catch can. 
    IE billet valve cover sold separately. 

     

    Product Features

    • Easy install catch can and valve cover kit

    • Complete kit, ready to install

    • Installs with IE billet valve cover (sold separately)

    • All components are black for a sleek stealth install

    • Braided stainless steel/Nylon hose

     

    $1,016.00
  3. IE Billet Valve Cover for 2.0T FSI Engines

    Update the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!

    PRODUCT DETAILS

    IE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.

    MACHINED DESIGN

    Machined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.

    FOR USE WITH CUSTOM CATCH CAN SETUPS ONLY

    This valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.

    PRODUCT FEATURES

     

    • Replaces factory plastic valve cover
    • Uses factory valve cover gasket
    • In-house CNC machined from aluminum
    • Includes o ring sealed matching billet oil cap
    • -10AN breather outlet for catch can setups

    ADDITIONAL PARTS REQUIRED

     

    EVAP CROSSOVER TUBE RELOCATION KIT

    The factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. IE Part Number: IEBAVC11


    CATCH CAN KIT FOR BILLET VALVE COVER

    The IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. IE Part Number: IEBACC3

     

    VEHICLE FITMENT

    • Audi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines
    • Audi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines
    • Audi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines
    • Audi - TT 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines*
    • Audi - TTS 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines
    • Audi - A3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines*
    • Audi - S3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines
    • VW - GTI 2006-2009 (MK5) 2.0T FSI (EA113) engines*
    • VW - Golf R 2012-2012 (MK6) 2.0T FSI (EA113) engines
    • VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T FSI (EA113) engines*
    • VW - Passat 2006-2010 (B6) 2.0T FSI (EA113) engines*
    • VW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*

    *This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1/Gen2 TSI engine and is not compatible with billet valve covers.

    $1,045.00
  4. IE Audi 2.0T TSI Cold Air Intake | Fits B8/B8.5 A4 & A5 (2009-2013)

    LEADING INTAKE FEATURES

    • Increased airflow - Get the most out of your upgrades
    • High-flow velocity stack - True performance design
    • Sealed heatshield - Separates cold air from engine bay heat
    • Perfect fitment - No modifications required to bolt-on
    • Amazing sound - Releases awesome turbo and engine noise
    • Looks great - Black powder coat, tight clearances, clean angles 

    AUDI B8 A4 & A5 COLD AIR INTAKE

    You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.

    EASY INSTALLATION

    Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.

    VEHICLE FITMENT

    • Audi - A4 2009-2015 (B8-B8.5) 2.0T
    • Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
    • Audi - A5 2009-2015 (B8-B8.5) 2.0T
  5. IE 2.0T 3" Catted Downpipe Fits Golf MK5 & MK6 GTI & Audi A3 8P (FWD)

    MK5 & MK6 2.0T DOWNPIPE FEATURES:

    • Massive power and torque gains with matching ECU tune

    • Allows for Stage 2 or K04 turbo ECU tunes

    • 1.5mm thick 304 stainless steel pipe construction

    • 16mm thick turbo flange - prevents warping and leaks

    • 200 cell per inch metal matrix CAT reduces emissions and smell without power loss

    • V-band mid-pipe connection for a leak free seal

    • Interlock core tough flex section allows engine movement without stress cracking

    • All installation hardware included -no unwanted trips to the parts store

    CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.

    UNLOCK STAGE 2 POWER:

    Equipping your MK5 or MK6 2.0T engine with an IE catted downpipe delivers additional horsepower, torque, and responsiveness when coupled with a matching Stage 2 or K04 turbo upgrade ECU tune. These significant power gains are added through the entire RPM band by allowing the turbocharger to flow freely through the 3" downpipe, high-flow catalytic converter, and mid-pipe. Careful tuning of the added sound from freeing up exhaust flow rewards you with an aggressive exhaust growl every time you touch the accelerator while minimizing cabin drone.

    All IE exhaust systems are designed in-house using state of the art digital scanning for a perfect fit and manufactured from 1.5mm thick wall 304 stainless steel offering a lifetime of performance and fun.

    SOUND TUNING:

    Give your car an aggressive motorsport sound that will keep you addicted to the throttle pedal without annoying exhaust drone. Engineered with thick-wall tubing and precise bends the downpipe opens up an unrestricted exhaust with a tuned sound without the "tinny" drone common on cheap catless downpipe options.

    HIGH-FLOW CATALYTIC CONVERTER (CAT):

    IE's performance downpipe for the MK5 & MK6 2.0T engines include a high-flow 200 cell per inch metal matrix catalyst (CAT) on the mid pipe section. This included CAT greatly reduces emissions output and unwanted offensive smells common on all catless systems, without losing horsepower! Have all the benefits of catless performance and none of the drawbacks with the IE high-flow CAT system

     

    BOLT-ON INSTALLATION:

    The IE downpipe replaces the majority of the factory exhaust from the turbocharger all the way back to the factory rear exhaust just before the axles. The 16mm turbo flange bolts to the stock or a K04 turbocharger. The downpipe section includes a new mount bracket and utilizes the factory mount points along with a tough interlock core flex section, this allows engine and chassis movement without stressing or cracking your downpipe. Easily connect the downpipe and catted mid-pipe using the simple and strong v-band connection. Finally, the mid pipe mounts to the stock rear exhaust with the included 3" to 60mm slip-fit sleeve, or easily adapt it to your cat-back exhaust of choice. In-house digitally scanned and designed for an exact fit and includes all hardware to make the install easy and straight forward.

    Installation should be completed by a professional and preferably on an auto lift. CLICK HERE to view and download the install guide.

    VEHICLE FITMENT GUIDE:

    MAKE MODEL YEAR ENGINE

    AUDI

    A3 (FWD only)

    2006-2013 (8P)

    2.0T FSI & TSI

    VW

    GTI

    2006-2009 (MK5)

    2.0T FSI & TSI

    VW

    GTI

    2010-2014 (MK6)

    2.0T TSI

    VW

    Jetta/GLI

    2006-2010 (MK5)

    2.0T FSI & TSI

    VW

    Jetta/GLI

    2010-2013

    2.0T FSI & TSI (non Gen 3)

    Does NOT fit EA888 Gen 3 engines found in some late model (2013+) MK6 Jetta & GLI. Please verify engine type before purchasing.

    $1,129.00
  6. IE Audi 3.0T Supercharger Pulley Upgrade | 4-Bolt Style

    DESCRIPTION

    CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7

    THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.

    CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output.  Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.

    NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
    Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.

    Most Stage 2+ software tunes are compatible with this kit.

    Product Details

    • Made in house at CTS Turbo in Canada
    • Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
    • OEM-spec honing and tolerances
    • Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
    • Nitride coated for long-lasting OEM looking finish
    • Includes belt and bolts required for install
    • Stock Size: 63.25mm, CTS Size: 57.3mm

    Fitment:

    • 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
    • 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
    • Late Audi Q7 with 3.0T SUPERCHARGED engine
    $369.00
  7. IE 3.0T TFSI 57.5mm Press-Fit Supercharger Pulley Upgrade| Fits Audi B8/B8.5 S4, S5, Q5, SQ5 & C7 A6, A7

    Description:

    The IE supercharger pulley for 3.0T V6 Audi engines is a great mod to extract more power form your supercharger. Capable of up to 492HP on it's own with a IE stage 2 single pulley tune, or combine with IE 188mm crank pulley (IEBAVJ7) (Stage 2 dual pulley) for up to a massive 548HP! These power gains are achieved by spinning the supercharger unit significantly faster than stock for higher boost levels with pulleys and proper ECU tuning.   

    LEADING FEATURES

    • Increases supercharger RPM by 10% for single pulley
    • Combine with IE 188mm crank pulley for 26% SC RPM increase
    • Increases supercharger boost levels for single & dual pulley tunes
    • CNC machined from billet steel
    • Inside bore precision honed at IE  
    • Zinc plated to ensure no rust
    • Replaces stock pulley on Eaton TVS 1320 Superchargers
    • Engineered in-house using CAD modeling and FEA analysis

    SUPERCHARGER PULLEY

    IE's Supercharger Pulley Upgrade for Audi 3.0T TFSI Engines found in B8/B8.5 S4, S5, Q5, SQ5 and C7 A6, A7 models increasing the supercharger RPM throughout the full powerband. At redline supercharger speed is increased by 1800 RPM. The IE pulley is reduces the size to 57.5mm in diameter, making it one of most aggressive and powerful on the market.  

    PULLEY SPECIFICATIONS

    PULLEY TYPE SUPERCHARGER PULLEY DIAMETER     CRANK PULLEY DIAMETER     SUPERCHARGER RATIO    
    Stock Pulley 63.20 162.25 2.5672
    Single pulley (SC pulley only) 57.5 162.25 2.8217
    Dual Pulley (SC + 188mm crank pulley)     57.5 188 3.2695
    Dual Pulley (207mm crank pulley) 63.20 207 3.2753


    If you want to jump straight to Stage 2 dual pulley power, IE 207mm crank pulley IEBAVJ6 can be used instead without the need to purchase this smaller press-on SC pulley.

    WHAT'S INCLUDED & WHAT'S SOLD SEPARATELY

    The following items are included:

    • 1X) IE 57.5mm overdrive supercharger pulley

    The following items are not included but required:

    • IE stage 2 single or dual pulley ECU tune
    • IE 3.0T supercharger pulley puller tool (IEBAVJ4)

      INSTALLATION

      The factory and IE supercharger pulleys are a press-fit design. Installation requires removal of the stock pulley using an IE pulley puller tool and properly heating the new IE pulley. Due to the hardware and tools required, professional installation is recommended.

      FITMENT

      • Audi S4 2009-2016 (B8/B8.5) 3.0T
      • Audi S5 2013-2015 (B8/B8.5) 3.0T
      • Audi S5 Convertible 2008-2015 (B8/B8.5) 3.0T
      • Audi SQ5 2012-2017 (B8/B8.5) 3.0T
      • Audi Q5 2008-2017 (B8/B8.5) 3.0T
      • Audi A6 2012-2016 (C7) 3.0T*
      • Audi A7 2011-2016 (C7) 3.0T*

      *2016-2018 A6 & A7 3.0T engines and some late model ROW (non-US) S4/S5 are equipped with a different engine (CREC) is not compatible with IE press-on supercharger pulley. Please see our 3.0T CREC 4-bolt supercharger pulley for these model years. CREC engines are easily identified as the supercharger pulley has 4 bolts to attach it to the supercharger instead of a press-fit style.

      $370.00
    • IE B8 A4 2.0T TSI Recirculating Catch Can Kit

      Description:

      PRODUCT FEATURES 

      • Helps prevent carbon build-up
      • Keep your engine running clean
      • Complete kit, ready to install
      • Installs under the factory engine cover
      • All components are black for a sleek stealth install
      • Braided stainless steel/nylon hose

      TECHNICAL DETAILS

      Prevent crankcase oil fumes from condensing and filling your turbo piping, intercooler, and intake manifold. The simple to install and quality looking IE catch can kit is a must for your VW MK5 & MK6 2.0T TSI engine.

      A catch can works well to catch all of the oil fumes that are omitted from the valve cover breather, removing the faulty factory oil separator in the process. This not only removes the oil mist that is found everywhere but will greatly help reduce carbon buildup on the intake valves, a common problem on TSI engines, which relates to power loss and poor drivability.

      Our kit includes the necessary valve cover breather adapter to remove the separator and plumb the catch can using the two included -10AN hoses. Using our catch can kit, you are not required to remove any of the emissions system or vent the catch can to the atmosphere, which can cause oil mist build-up in your engine bay. Our breather plate simply installs in place of the factory plastic breather plate located on top of the valve cover, while the catch can mounts to a custom bracket easily accessible on the passenger side of the vehicle.

      This kit uses the Integrated Engineering billet recirculating catch can, which features our state-of-the-art baffle system to catch the oil mist and not let it pass back into the turbo inlet. This flawless catch can is fully serviceable, easily disassembling if needed. Draining the catch can is simple with the use of the included T handle drain valve, no tools necessary. This beautiful piece is finished with a bright black anodize finish, which maintains a stealthy appearance while looking great in your engine bay.

      Everything you need to upgrade the PCV system on your Audi B8 2.0T TSI engine is included with this kit, with a very simple installation that takes less than an hour to install on average. This kit allows the use of the factory engine cover if desired, and the entire install is completely reversible if it ever needs to be removed for any reason.

      COLD WEATHER CLIMATES

      Catch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking the contents of the catch can frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.

      FITMENT

      AUDI - A4 B8 & B8.5 2.0T TFSI*
      AUDI - A4 ALLROAD B8 & B8.5 2.0T TFSI*
      AUDI - A5 B8 & B8.5 2.0T TFSI*
      *Does not fit Flexfuel 5th injector vehicles with metal intake manifold. 

      $955.00
    • IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5

      LEADING INTAKE FEATURES

      • Increased airflow - Get the most out of your upgrades
      • High-flow velocity stack - True performance design
      • Sealed heatshield - Separates cold air from engine bay heat
      • Perfect fitment - No modifications required to bolt-on
      • Amazing sound - Releases awesome turbo and engine noise
      • Looks great - Black powder coat, tight clearances, clean angles 

      AUDI B8 A4 & A5 COLD AIR INTAKE

      You're not just building a run of the mill bolt-on car with cheap imported parts. No, your Audi B8 A4 or A5 project deserves true performance designed mods and the best cold air intake available. This is not your average filter on a stick, IE engineers used specialized computer flow analysis software coupled with 3D scans of the engine bay to maximize performance. The result is a unique intake shape that optimizes flow and reduces air restrictions for an unmatched bump in power. Factory-like mounting solutions are used for a perfect fit and long life. Your new intake will fit like it was there stock, but perform and sound like a true motorsport intake design.

      EASY INSTALLATION

      Installation is quick and easy to install with basic tools. The process should take under an hour for most enthusiasts. CLICK HERE to view and download the IE B8/B8.5 A4/A5 Cold Air Intake Install Guide.

      VEHICLE FITMENT

      • Audi - A4 2009-2015 (B8-B8.5) 2.0T
      • Audi - A4 Allroad 2009-2015 (B8-B8.5) 2.0T
      • Audi - A5 2009-2015 (B8-B8.5) 2.0T
    • IE Audi B9 A4 & A5 Cold Air Intake - Fits Cars With NO MAF ONLY

      INCREASE POWER AND SOUND WITH A COLD AIR INTAKE

      The IE Audi B9 A4 & A5 2.0T Cold Air Intake is the perfect addition to any engine bay. Give your Audi added horsepower, torque, snappier throttle response, and an aggressive sound. Typical peak gains from our CAI are roughly 10-20 Horsepower and Torque.

      POWER GAINS

      The ram air design, velocity stack, and massive 55-inchfilter inlet help deliver the most HP possible from a cold intake system.

      Expect peak gains of 10-20+HP/TQ on tuned engines.

      INCLUDED IN THE B9 IE CAI KIT

      • IE Intake velocity stack & heatshield assembly
      • IE Silicone turbo inlet pipe assembly
      • IE 5” inlet performance air filter
      • IE Turbo heat shield
      • All necessary hardware (clamps, nuts, bolts, etc)

      INCREASED AIR FLOW

      This Intake delivers an impressive flow increase to feed your turbo. More cold air flow means more power; especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System.

      DESIGN DETAILS

      IE engineers set out to produce the highest performing cold air intake that looks great and fits like a factory installed part in your A4. The latest in computer design and 3D scanning technology were employed during the development process for a perfect fit and maximum performance. The final product resulted in the greatest performing and best-looking intake available.

      HIGH-FLOW VELOCITY STACK

      Delivering cold air to your engine is a must for making power. The velocity stack efficiently channels air as quickly as possible into the intake system. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling on heat shields.

      CUSTOM HEAT SHIELD

      IE uses a three piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay. A second heat shield is mounted above the turbocharger to further protect against power robbing heat off the exhaust and turbo.

      PERFECT FITMENT

      This Intake fits B9 Audi A4 and A5 without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle free fit. Additionally, the stock rubber mounts allow for engine movement which keeps intake components from getting damaged.

      CLASSY AND CLEAN APPEARANCE

      Wrinkle black powder coated velocity stack and heat shields result in a sleek and sporty appearance in any engine bay. As a final touch, all IE heat shields are finished with a classy, laser etched, stainless steel IE logo badge.

      EASY INSTALLATION

      Installation is a quick and easy install with basic tools. The process should take around an hour for most enthusiasts. CLICK HERE to view and download the IE B9 Cold Air Intake Install Guide.

      INSTALL OVERVIEW VIDEO

      DYNO POWER RESULTS

      The following power result data was collected on our in-house Dynapack hub dyno. Dyno chart is as tested at 4500 feet altitude with SAE corrected numbers. Before and after results are direct back-to-back comparisons on a full bolt-on stage 2 B9 A4 2.0T engine. The only change made to the vehicle between testing is the swap from a stock intake with a new clean air filter to the IE Cold Air Intake Kit. Dyno power results are approximate and may vary from car to car.

      HORSEPOWER & TORQUE DYNO CHART

      HORSEPOWER & TORQUE POWER GAINS OVER STOCK

      VEHICLE FITMENT

      • Audi - A4 2015+ (B9) 2.0T
      • Audi - A5 2015+ (B9) 2.0T
      • Audi - A4 Allroad 2015+ (B9) 2.0T

      This intake does not fit cars that have a MAF housing/sensor.

      $655.00
    Set Descending Direction

       

    Items 1 to 10 of 15 total

    1. 1
    2. 2