Currently Shopping by
-
performance:
Air Intake
Turbo
- Filter By cosmetics
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Audi
LEYO AIR Cold Air Intake System
Description:
Leyo Motorsport’s CAI for the A4 B9 is a must have for those seeking to upgrade their car. By removing some factory air flow restrictions together with a massive 4 inch conical filter, this intake guarantees more horse power at an affordable cost.
High grade aluminum heat shield effectively blocks out excess heat from the engine bay while is also significantly lighter than the steel heat shields found on the market. A secondary heat shield is incorporated into the design to block excessive heat from the exhaust manifold.
​
Installation is easy and straight forward, no fabrication required.
​
*This product is only for use on the race track.
*Please note that if your car has air flow sensor on the inlet pipe, this intake does not fit.
Specifications:
-
4” high flow conical filter.
-
Aluminum heat shield.
-
Increased induction sound.
-
Easy installation.
$699.00-
LEYO - EA211(MQB) MK7 1.4 COLD AIR INTAKE SYSTEM V2
Description:
Replace your restrictive factory airbox with this new airbox from Leyo Motorsport. Meticulously engineered, this final design is the culmination of numerous air flow rendering and analysis.
High flow air filter ensures maximum air flow eliminating the air flow restrictions found in the stock airbox. More air means more usable power especially when paired with Leyo charge pipe for the MK7 1.4.Installation is simple and straightforward, in just minutes your engine bay will be transformed with the addition of this Leyo intake kit.
​
*This product is only for use on the race track.
Specifications:
-
Track and dyno proven for greater horsepower gain.
-
Maximum airflow.
-
Unique quality and design.
-
Simple installation.
$499.99-
LEYO - Oil Catch Can Kit V2 Black
Description:
Protect your engine by preventing excessive crankcase oil vapor entering the intake and carbon build up with LEYO Oil Catch Can Kit. Also known as blow-by, oil vapor is produced under load, spirited driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine.
Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO Oil Catch Can Kit had also included pre-installed drain valve, protecting your pride and joy has never been easier.
Specifications:
-
Installs under factory engine cover.
-
Uniquely designed filtration system.
-
Pre-installed drain valve for easy draining.
$919.00-
CTS MQB MK7/A3/S3 Turbo Outlet Pipe Kit (2.5")
2.5" Aluminum piping - OEM style pipe bracket - High quality tig welds - Durable powdercoat finish Hardware Included: - Silicone coupler - 2 x hose clamps - Installation hardware - Upper turbo outlet pipe - Lower turbo outlet pipe$349.00
CTS Turbo MK7 Billet Torque Arm Insert Type 1 (2015)
MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015) 8V Audi A3/S3 (up to production date Sept 27, 2015) MK3 Audi TT/TT-S (up to production date Sept 27, 2015)Regular Price: $79.95
Special Price $65.00
CTS TURBO MQB AWD EXHAUST DOWNPIPE (MK7/MK7.5 GOLF AWD, GOLF R, A3/S3 8V & 8V.5 TT/TT-S QUATTRO)
T304 Seamless Stainless Steel tubing -T304 Stainless Steel flanges -100% TIG Welded -T304 Stainless Steel 02 bung -Torca Accuseal Stainless Steel Clamps -Great Sound even with factory exhaust, no drone!! To ensure the best performance and operation, proper tuning software must be used (Stage 2 software from most large tuning companies is compatible).$1,199.00
CTS Turbo MQB (MK7/7.5 A3/S3 8V/8V.5) Throttle Pipe
Mandrel bent aluminum piping with durable black powder coating - CNC machined MAP flange - 4 Ply silicon connectors with stainless steel clamps - Integrated water methanol bung with plug - Stainless steel clamps$299.00
CTS VW MK7/Audi 8V DIRECT FIT Intercooler (GTI, Golf R, A3, S3)
Stock Golf R core size: 24.25"x1.37"x16.25" = 542.00 cubic inches Stock GTI core size: 24.25"x1.25"x16.25" = 493.00 cubic inches High density bar-and-plate core with cast endtanks. Fully compatible with Adaptive Cruise Control (ACC).$1,499.00
FORGE MOTORSPORT RECIRCULATING VALVE | 1.8 & 2.0TS EA888 GEN 3 - VW MK7/7.5 GTI & R
Product Description
This will replace OEM part numbers 06H 145 710D, 06F 145 710G, & 06H 145 710 C
Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CJXB, CZPA, and CJXC;US codes CPLA and CPPA) including Golf MK7 R
This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp!
This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
In The Box:
1 x FMDVMK7R Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker
LEYO - Diverter Valve Kit
Description:
Struggling with the OEM Turbo Valve? Need to add that unique boost pressure sound? Make sure to get your hands on All New Re-Designed Leyo Motorsports latest in-house designed Diverter Valve. Leyo Motorsport Diverter Valve multi piece design is built and engineered to solve the failure issues associated with the OEM solenoid valves and their diaphragm resulting in boost leaks. It is built from 6061 Billet Aluminum with hard coated Anodized finish with an internal serviceable piston based design that provides greater reliability over the OEM as well as quicker throttle and turbo response. All components are made in-house by Japan CNC’s, inspected to 0.01mm tolerance by Japan CMM, laser etched and race proven.
Leyo Motorsport Diverter vavle has a unique and fully tested internal piston compared with other brands in order to get the maximum results in power. We are offering a stronger, more durable and reliable valve compared to the OEM unit. We do have uprated valve spring in stock that is sold separately.
Specifications:
-
Made from the highest quality T6061 billet aluminium construction.
-
Direct OEM replacement..
-
Improved throttle response
-
Consistent turbo boost.
-
Reduced turbo lag .
-
Fully compatible with OE electronics.
-
Fully serviceable piston .
-
Holds up to 600HP. (with optional uprated spring kit)
* Note : This DV kit comes supplied with BLACK / WHITE / YELLOW Spring. Uprated BLUE / RED Spring is Available for purchase.
SUGGESTED SPRING INSTALLATION
Above figure is only preference. Please refer vehicle modification needs.
$399.00-
SAFE & SECURE SHOPPING
