A3 - H&R Springs - Leyo Motorsport - Integrated Engineering - Supernova - XFORCE - Eibach - VW Central - Whiteline
H&R Lowering Springs - Audi Q3
Eibach performance lowering springs Pro-Kit
The absolute top seller. The number one choice of automotive enthusiasts worldwide. The Eibach Pro-Kit springs are the ideal solution for your series vehicle . The proven spring system maximizes the handling of your vehicle and ensures a sporty look .
The Pro-Kit lowers the center of gravity of your vehicle and reduces the rebound during accelerating, reduces the tendency of the body to roll when cornering and the dipping when braking drives.
The Eibach Pro-Kit in combination with appropriate wheels and tires is the guarantee of success for optimal performance. The lowering with Eibach Pro-Kit springs reduces the unnecessary distance between the tires and the wheelhouse and gives the vehicle a sporty look.
Eibach Pro-Kits are designed by Eibach's chassis engineers and test experts designed to deliver a combination of sporty looks and performance without sacrificing safety or ride quality.
- A leading performance suspension spring system worldwide
- tested for the combination with stock and retrofit dampers
- First step towards a complete sport suspension system
- Lower center of gravity – lowers vehicle up to 40 mm (depending on the vehicle)
- Spring design for traction and attraction
- Progressive spring design
- Performance Handling
- ABE or parts certificate
IE cone filters are specifically designed for high-flow and perfect fitment to the integrated velocity stack found on most IE cold air intake kits. This is a dry filter that can be oiled, however, we do not recommend air filter oiling on turbocharged or forced induction vehicles. The filter can be cleaned and re-used many times. If you find it difficult to clean your filter or find it severy stained, it may be time to replace the filter element. This is a direct replacement filter ready to keep your car on the road and performing at its best. Includes new filter clamp.
H&R Sport Sway Bars are crafted from a special 50CRV4 steel alloy, the highest tensile strength available.
The quality of the material and design guarantees smooth transitional sway bar function, decreasing feedback response time and increasing stiffness over stock.
H&R Sport Sway Bars improve lateral stability and cornering grip, while reducing body roll. H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase stiffness and reduce body roll while maintaining comfort and increasing cornering control, lateral stability, and grip.
A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness.
Being 100% German made means a commitment to doing it right and giving you the best quality product.
Features:
- Reduces body roll
- Highest tensile strength available
- Works with DCC (adaptive suspension)
- Special urethane/Teflon composite bushes that are maintenance free
Swaybar Size:
- Front 24mm
- Rear 26mm
Adjustable:
- Front x2
- Rear x2
Compatibility:
- Audi A3 8P 2003-2012 4WD
- Audi S3 8P 2003-2012 4WD
- Skoda SUPERB 3T SEDAN 4WD
- Skoda OCTAVIA 1Z SEDAN + WAGON 4WD
- VW GOLF MK5 2003-2008 4WD
- VW GOLF MK6 2008-2012 4WD
- VW PASSAT B6/B7 2005-2014 4WD
- VW Tiguan 5N 2007-2015 4WD
Sale
Eibach PRO-KIT Performance Springs
World‘s leading Performance Suspension Spring System
Regular Price:
$624.00
Special Price
$562.00
Sale
Eibach Sportline Sport Performance Springs
Pure Sport Suspension Springs and Appearance
Regular Price:
$636.00
Special Price
$572.00
Sale
- Australian owned
- 100% Fitment Guarantee
- Genuine quality brands
Regular Price:
$229.00
Special Price
$146.70
H&R springs 28826-1 for Audi A3 incl. Lim./ Sedan + Sportback Quattro
H&R sport springs 28826-1 for Audi are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. H&R springs have superb ride comfort and increased driving convenience.
All H&R springs are made from high-strength spring steel to ensure first-class quality and performance. The springs are designed in such a way that they can be easily combined with standard or retrofit dampers and offer a sporty look. A powder coating also improves corrosion resistance while giving the spring a high-quality appearance.
Product benefits:
- Sporty appearance
- Improved handling characteristics
- Lowered center of gravity
- Linear or progressive spring design
- Compatible with OE and aftermarket shock absorbers
- Powder coated for anhanced appearance and corrosion resistance
- Delivered with ABE or TUV approval
- Engineered, manufactured and tested in Germany
The secret to such success? To put it simply, the technology H&R employs to develop cutting-edge suspension systems for competition use is the very same used to develop innovative suspension components for street-driven cars. In addition, H&R maintains extensive involvement in several touring car, GT and Monoposto racing series. Not to mention the Formula 1- where each circuit may have its own demanding characteristics.
In the harsh environs of competition, H&R is able to test new materials and innovate production technologies. All of which can help racing teams adapt to changing road conditions accurately and efficiently.
Vehicle Compatibility:
-
Manufacturer
|
Model
|
Type
|
Lowering in mm (FA/RA)
|
Axle load (FA/RA)
|
Audi
|
A3 incl. Lim./ Sedan + Sportback Quattro
|
Type 8V 4WD without MRC and/or Audi Drive Select/ without MRC and/ or Audi Drive Select for multi-/four-link rear axle / for multi-link /four-link RA
|
40/40
|
/
|
Sale
- Gain over 10+ horsepower and torque with tuning
- Available with optional high gloss carbon fiber lid
- Adds aggressive motorsport turbo and engine sound
- Full-width air inlet spans entire radiator support
- High-flow built in velocity stack & 5″ air filter
- 3.5″ turbo inlet pipe and silicone – removes factory restrictions
- Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
- Through-flow flat surface 3-ply couplers
- Perfect fitment by utilizing factory airbox mounts
- Black powder coated inlet pipe and heat shield
- Stealth coolant line included at no extra cost
- Works with/without SAI – no need to buy an extra kit
We were uncompromising in our quest to build the ultimate cold-air intake, the one we wanted for our own cars. Here’s why you’ll love it too:
On turbo engines more flow equals more power! Putting performance first, the ram air design, velocity stack, 3.5″ inlet pipe, and massive 5-inch filter all function to deliver the most power possible from an intake system. This Intake design delivers a massive flow increase over the stock air box, resulting in over 10 horsepower and torque over stock and far exceeds this on hybrid or large turbo setups.
At the base of our intake is an alloy heat shield that spans the entire front of the car for maximum fresh air flow, seals off hot engine bay air, and securely holds the velocity stack and air filter. The modular design allows for an optional carbon fiber lid to be installed further sealing off the intake from radiant engine heat and provides a high-end gloss carbon finish to your engine bay.
PERFECT FITMENT & APPEARANCE
IE engineers utilize cutting edge 3D scanners and specialized software to create a digital model of the engine bay. This digital environment ensures the intake clears and fits exactly like a factory-installed unit. Rapid printed prototypes are then used to ensure fitment in actual vehicles before moving onto production. The result is an intake that provides a hassle-free install with angles and curves that not only look at home in your engine bay, but elevates the style completely.
Everything needed to install your new IE intake is included without having to make any trips to the hardware store or purchase additional add-on kits. Included is our stealth coolant line, which completely hides under the intake and out of view. This protects the coolant line from interfering or rubbing on anything that may lead to future coolant leaks. For vehicles equipped with secondary air injection (SAI) the IE intake is equipped to connect to the factory line without having to purchase an additional kit. Don’t have SAI? No worries, a plug is also included.
MOTORSPORT PERFORMANCE & SOUND
Delivering cooler air and in enough volume is a must for making power. To accomplish a ram-air design, our engineers utilize large piping and a velocity stack to efficiently deliver as much air as possible. We know a fast car is fun to drive, but a good sounding one really puts a smile on your face. The high-velocity bellmouth and free flow design of our intake also produces the exciting side effect of amplifying engine notes and turbo sounds that create a unique experience every time you push the the throttle down.
MAKE |
MODEL |
YEAR |
ENGINE(S) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular Price:
$799.00
Special Price
$739.95
Sale
- Gain over 10+ horsepower and torque with tuning
- Available with optional high gloss carbon fiber lid
- Adds aggressive motorsport turbo and engine sound
- Full-width air inlet spans entire radiator support
- High-flow built in velocity stack & 5″ air filter
- 3.5″ turbo inlet pipe and silicone – removes factory restrictions
- Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
- Through-flow flat surface 3-ply couplers
- Perfect fitment by utilizing factory airbox mounts
- Black powder coated inlet pipe and heat shield
- Stealth coolant line included at no extra cost
- Works with/without SAI – no need to buy an extra kit
We were uncompromising in our quest to build the ultimate cold-air intake, the one we wanted for our own cars. Here’s why you’ll love it too:
On turbo engines more flow equals more power! Putting performance first, the ram air design, velocity stack, 3.5″ inlet pipe, and massive 5-inch filter all function to deliver the most power possible from an intake system. This Intake design delivers a massive flow increase over the stock air box, resulting in over 10 horsepower and torque over stock and far exceeds this on hybrid or large turbo setups.
At the base of our intake is an alloy heat shield that spans the entire front of the car for maximum fresh air flow, seals off hot engine bay air, and securely holds the velocity stack and air filter. The modular design allows for an optional carbon fiber lid to be installed further sealing off the intake from radiant engine heat and provides a high-end gloss carbon finish to your engine bay.
PERFECT FITMENT & APPEARANCE
IE engineers utilize cutting edge 3D scanners and specialized software to create a digital model of the engine bay. This digital environment ensures the intake clears and fits exactly like a factory-installed unit. Rapid printed prototypes are then used to ensure fitment in actual vehicles before moving onto production. The result is an intake that provides a hassle-free install with angles and curves that not only look at home in your engine bay, but elevates the style completely.
Everything needed to install your new IE intake is included without having to make any trips to the hardware store or purchase additional add-on kits. Included is our stealth coolant line, which completely hides under the intake and out of view. This protects the coolant line from interfering or rubbing on anything that may lead to future coolant leaks. For vehicles equipped with secondary air injection (SAI) the IE intake is equipped to connect to the factory line without having to purchase an additional kit. Don’t have SAI? No worries, a plug is also included.
MOTORSPORT PERFORMANCE & SOUND
Delivering cooler air and in enough volume is a must for making power. To accomplish a ram-air design, our engineers utilize large piping and a velocity stack to efficiently deliver as much air as possible. We know a fast car is fun to drive, but a good sounding one really puts a smile on your face. The high-velocity bellmouth and free flow design of our intake also produces the exciting side effect of amplifying engine notes and turbo sounds that create a unique experience every time you push the the throttle down.
MAKE |
MODEL |
YEAR |
ENGINE(S) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular Price:
$1,498.00
Special Price
$1,299.00