You have no items in your shopping cart.

Product was successfully added to your shopping cart.

8V (2015-2017)

Set Ascending Direction

   

Items 41 to 50 of 83 total

  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. CTS TURBO STAGE 3 FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS

    DESCRIPTION

    We are proud to release the new our CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5.  As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump).  While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system.  CTS has developed a fully integrated fueling system, which utilizes a Walbro 450LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 500HP.  If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.

    NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.

    Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.

    Product Details:

    – Genuine Walbro High Output in-tank 450LPH E85 compatible Fuel Pump
    – Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
    – CTS CNC machined/black hard anodized pump adapter
    – CTS CNC machined/black fuel pump spacers
    – CTS CNC machined/black fuel pump venturi standoff
    – Viton O-ring
    – Nylon wire crimps
    – Drill bits
    – Stainless steel fasteners

    Fitment:

    • 2015 – current VW Golf (incl Sportwagen and AllTrack)
    • 2015 – current VW GTI (incl Rabbit)
    • 2015 – current VW Golf R
    • 2015 – current Audi A3
    • 2015 – current Audi S3
    • 2017 – current Audi A4/A5/AllRoad
    $629.00
  2. CTS TURBO STAGE 3.5 HELLCAT FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS CTS TURBO STAGE 3.5 HELLCAT FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS
    Sale

    CTS TURBO STAGE 3.5 HELLCAT FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS

    Description

    We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5.  As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump).  While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system.  CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP.  If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.

    NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.

    Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.

    Product Details:

    – Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
    – Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
    – CTS CNC machined/black hard anodized pump adapter
    – CTS CNC machined/black fuel pump spacers
    – CTS CNC machined/black fuel pump venturi standoff
    – Viton O-ring
    – Nylon wire crimps
    – Drill bits
    – Stainless steel fasteners

     

    Fitment:

    • 2015 – current VW Golf (incl Sportwagen and AllTrack)
    • 2015 – current VW GTI (incl Rabbit)
    • 2015 – current VW Golf R
    • 2015 – current Audi A3
    • 2015 – current Audi S3
    • 2017 – current Audi A4/A5/AllRoad

    The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM

    Regular Price: $699.00

    Special Price $679.00

  3. Flow Designs - VW Golf Fire Extinguisher Bracket/Mount

    DESCRIPTION
    Suits RS3 & S3 models


    DETAILS:
    Are you like us, and wanting to test the full potential of your Audi at the track? Well, with this in mind, we have created the Flow Designs Fire Extinguisher Bracket for the S3 8V (PFL) Sedan. Proudly designed and manufactured right here in Australia, and with CAMS (Confederation of Australian Motorsport) and AASA (Australian Auto-Sport Alliance) regulations taken into consideration, this extinguisher bracket brings you one step closer to enjoying your pride and joy on any weekend.

    Made from black powder-coated 3mm thick stainless steel, the Audi Fire Extinguisher Bracket fits discreetly under the seats using the OEM mounting locations with no drilling required. We provide you with high-tensile mounting hardware, so if your ambition exceeds your ability or if you have a crucial moment, your extinguisher is located securely and in easy reach.

    Given the international popularity of the Audi models, the Flow Designs fire extinguisher bracket fits both right-hand drive and left-hand drive delivered vehicles. Order yours today, and we will see you out there on the racing line.

    KIT INCLUDES:

    • Audi Fire Extinguisher Bracket/Mount
    • High Tensile Screws
    • x2 Flow Designs Stickers
    • x1 Flow Designs Air Freshener
    • Install Instructions


    MATERIAL & FINISH:

    • 3mm Stainless Steel
    • Powder-coated Texture Black

    FITS MODELS:

    • MK5 Golf GTI & R32
    • MK6 Golf GTI & R
    • MK7 Golf GTI & R
    • MK7.5 Golf GTI & R
    • MK8 Golf GTI
    • S3 8V Sportback PFL
    • RS3 8V Sportback PFL
    • S3 8V Sedan PFL
    • S3 8V Sedan FL
    • RS3 8V Sedan PFL

    $89.00
  4. CTS TURBO IS12 / IS20 / IS38 TURBO BLANKET CTS TURBO IS12 / IS20 / IS38 TURBO BLANKET
    Sale

    CTS TURBO IS12 / IS20 / IS38 TURBO BLANKET

    CTS Turbo Blankets isolate the heat produced by your IHI IS12/IS20/IS38 turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.  In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.

    This turbo blanket fits all IHI turbos found on MQB platform cars

    IS12 Turbos found on MK7 1.8TSI Golf and 8V Audi A3 FWD

    IS20 Turbos found on MK7 GTI and 8V Audi A3 Quattro

    IS38 Turbos found on the MK7 Golf R and 8V Audi S3

    CTS Turbo Blanket Heat Tolerance:

    Interior Surface:
    Max Temperature Rating: 2100 Deg F
    Continuous Use Limit: 1800 Deg F

    Exterior Surface:
    Direct Contact Limit: 800 Deg F
    Radiant Heat Limit: 1200 Deg F

    Regular Price: $199.00

    Special Price $189.00

  5. CTS TURBO MQB TURBO INLET HOSE – MK7 VW GOLF/GTI/GOLF R AND AUDI 8V A3/S3

    CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles.  The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow.  Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance.

    The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!!

    The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine!

    Features:

    • Designed to fit factory airbox and any turbo inlet pipe
    • 5-ply silicone construction
    • Smooth interior
    • High strength hose clamps

    Components:
    1 x CTS Turbo MQB Turbo Inlet Hose
    2 x Hose clamps

    Fits the following vehicles:

    • MK7 VW GTI
    • MK7 VW Golf R
    • MK7 Audi A3
    • MK7 Audi S3
    $129.00
  6. Flow Designs - S3 8V Sedan FL Full Lip Splitter Set

    DETAILS:

    The Flow Designs splitter set for the Audi S3 8V Sedan FL includes front/side splitters, rear spats & flow lock rear diffuser. Adding all bolt on accessories or our optional extras (Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount) will be the perfect addition to your S3 Sedan, as Flow Designs splitters offer perfect fitment, easy installation every time.

    All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

    We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

    KIT INCLUDES:

    • S3 8V Sedan FL Front Lip Splitter & Mounting Brace
    • S3 8V Sedan FL Side Skirt Splitters (Pair)
    • S3 8V Sedan FL Rear Spats (Pair)
    • S3 8V Sedan FL Flow-Lock Rear Diffuser
    • WITH all accessories package: S3 8V Sedan FL Front Lip Splitter Extensions (Pair)
    • WITH all accessories package: S3 8V Sedan FL Front Lip Splitter Winglets (Pair)
    • WITH all accessories package: S3 8V Sedan FL Side Skirt Splitter Winglets (Pair)
    • WITH all accessories package: S3 8V Sedan FL Rear Spat Winglets (Pair)
    • ADD: Rear Window Vents (Pair) &/or Fire Extinguisher Bracket/Mount if desired.
    • 2 Flow Designs stickers
    • Fitting kit


    MATERIAL & FINISH:

    • Front lip splitter, side skirt splitters, rear diffuser, rear pods/spats: 10mm thick polyethylene composite, bevelled edges
    • Hand polished satin black
    • Rear diffuser fins, Window Vents and accessories: scratch-resistant textured ABS plastic
    • Fire Extinguisher Bracket: 3mm Stainless Steel, Powder-coated Texture Black

  7. CTS TURBO AUDI/VW 7-SPEED DSG/S-TRONIC DQ381 2.5” TURBO OUTLET PIPE (MK7 & MK7.5, 8V.2, 8S.2)

    DESCRIPTION

    CTS Turbo is happy to release our high flow turbo outlet pipe kit for MQB vehicles equipped with BOSS V3 kits or hybrid turbochargers. This part is perfect to compliment the 2.5″ turbo outlet on the BOSS V3 kit, making the installation seamless.

    The CTS Turbo 2.5″ high flow turbo outlet pipe kit replaces all the factory charge piping between the turbocharger compressor housing and intercooler.

    Product Details:

    • 2.5″ turbo outlet fitting
    • 2.5″ Aluminum piping
    • OEM style pipe bracket
    • High quality tig welds
    • Durable powdercoat finish
    • Fits all MQB models with BOSS V3 kit or hybrid turbos.

    Hardware Included:

    • 2.5″ Silicone coupler
    • Lower turbo outlet pipe
    • 2.5″ turbo outlet fitting
    • Hose clamps
    • Installation hardware

    Fitment:

    •  VW Golf/AllTrack/Sportwagen 1.8TSI (2015 – 2020)
    •  VW GTI (2015 – 2021)
    •  VW Golf R (2015 – 2019)
    •  Audi A3 (2015 – 2020)
    •  Audi S3 (2015 – 2020)
    • Audi TT/TT-S (2015-2020)
    •  VW Jetta GLI (2019 – 2020)

    Vehicle Fitment

    Model

    MakeModelYearGeneration
    AUDI A3 2015 - 2020 8V
    AUDI S3 2015 - 2020 8V
    AUDI TT 2016 - 2020 8S
    VW GOLF 2015 - 2020 MK7/7.5
    VW GOLF R 2015 - 2019 MK7/7.5
    VW GTI 2015 - 2020 MK7/7.5
    $399.00
  8. IE Turbo Outlet Muffler Delete for VW MK7/MK7.5 & Audi 8V/8S 2.0T Engines

    Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
    $249.00
  9. CTS MQB MK7/A3/S3 Turbo Outlet Pipe Kit (2.5")

    2.5" Aluminum piping - OEM style pipe bracket - High quality tig welds - Durable powdercoat finish Hardware Included: - Silicone coupler - 2 x hose clamps - Installation hardware - Upper turbo outlet pipe - Lower turbo outlet pipe
    $349.00
  10. CTS Turbo MK7 Billet Torque Arm Insert Type 1 (2015) CTS Turbo MK7 Billet Torque Arm Insert Type 1 (2015)
    Sale

    CTS Turbo MK7 Billet Torque Arm Insert Type 1 (2015)

    MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015) 8V Audi A3/S3 (up to production date Sept 27, 2015) MK3 Audi TT/TT-S (up to production date Sept 27, 2015)

    Regular Price: $79.95

    Special Price $65.00

Set Ascending Direction

   

Items 41 to 50 of 83 total

  1. 3
  2. 4
  3. 5
  4. 6
  5. 7