Volkswagen - CTS Turbo - Forge Motorsports - IPE - Integrated Engineering - VW Central
Sale
VW MK7/MK7.5 & AUDI 8V 2018+ DSG TUNE
Don't short shift your ECU tune and performance parts, get the most out of your modifications with the IE DSG Transmission tune for 2019+ GLI, GTI, Golf R, A3, S3 2.0T. Instantly gain increased power, higher RPM limit, faster shifts, optimized shift points, and a true performance tuned transmission. Acceleration times will greatly improve transforming your 2.0T into a fully rounded performance monster.
DSG TUNE FEATURES
Required for high torque IE ECU tunes
Lightning fast gear shifts
Kick down in manual mode eliminated
Lag time reduced when starting off in first gear
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
REQUIRED FOR SELECT ECU TUNES
Required for GLI, GTI, Golf R, A3, & S3 Stage 1 high torque and all Stage 2 tune files, your new transmission tune will no longer lug the engine in drive mode, or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. To get the most out of your tune investment, a lot of features have been added to make a fully rounded performance vehicle with more aggressive launches, faster shifting, higher RPM, and optimized shift points. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
ALL INCLUSIVE DSG FILE, NO STAGES
That's right, your IE DSG tune is all-inclusive and does not offer expensive "Stage" upgrades. All features for any ECU stage are included in the tune and will never require unnecessary upgrade charges.
IE POWERlink DIRECT PORT FLASH TOOL
IE's POWERlink direct port flash tool is required to flash your ECU (engine control unit) or TCU (transmission control unit) and is available separately. The POWERlink tool is sold with all new IE ECU tunes and can also be used to flash your new DSG tune. If you already own an IE POWERlink unit, purchasing this file will add the credits to your cable within one working day. If you do not own a POWERlink cable, please chose to add one in the drop-down menu above.
POWERlink FEATURES:
FILE SWITCHING
The POWERLink cable allows for map switching without making a trip back to an IE Software dealer.
EASY OPERATION
Simply plug your IE PowerLink cable into your vehicle’s OBD-II port and the USB port on your Windows-powered laptop to use the included IE Flash Wizard software. The flash wizard will then walk you through the installation steps.
FLASH MULTIPLE CARS
Have a friend with a compatible VW or Audi? Share the power with up to 5 different cars with a single cable. Just add enough credits to your cable for the desired tune and power-up your entire crew.
RETURN TO STOCK ANYTIME
With the IE PowerLink, you can return your vehicle back to original ECU or TCU programming at any time.
EASY UPDATES
IE will always provide free software updates as they become available and easily reflashed through your IE PowerLink cable.
SYSTEM REQUIREMENTS
Laptop or tablet with Wifi connection and USB port running Windows 7 or newer operating system required. Powered by 32 or 64-bit processor with 1.0GHz or greater and 4GB of Ram. Windows NT not supported.
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your turbocharged Gen 3 TSI with IS20 Turbo engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The MQB 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
KICK DOWN REMOVED IN MANUAL MODE
The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI Gen 3 engine and transmission.
VEHICLE FITMENT
VW - GTI 2019+ (MK7.5) W/DSG TRANSMISSION
VW - GLI 2019+ (MK7) W/DSG TRANSMISSION
VW - GOlf R 2018+ (MK7.5) W/DSG TRANSMISSION
AUDI - A3 2019+ (8V) W/ DSG TRANSMISSION
AUDI - S3 2018+ (8V) W/ DSG TRANSMISSION
Regular Price:
$999.00
Special Price
$950.00
Sale
MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015)
8V Audi A3/S3 (up to production date Sept 27, 2015)
MK3 Audi TT/TT-S (up to production date Sept 27, 2015)
Regular Price:
$79.95
Special Price
$65.00
T304 Seamless Stainless Steel tubing
-T304 Stainless Steel flanges
-100% TIG Welded
-T304 Stainless Steel 02 bung
-Torca Accuseal Stainless Steel Clamps
-Great Sound even with factory exhaust, no drone!!
To ensure the best performance and operation, proper tuning software must be used (Stage 2 software from most large tuning companies is compatible).
Mandrel bent aluminum piping with durable black powder coating
- CNC machined MAP flange
- 4 Ply silicon connectors with stainless steel clamps
- Integrated water methanol bung with plug
- Stainless steel clamps
Audi - S1 EA888 Gen 3 - 2.0 TFSI
Audi - A3 & S3 (MK3) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI
Audi - A4 / Allroad (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - A5 (B8 & B8.5) - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - A6 (C6 & C7) - EA888 Gen 2 - 2.0 TFSI
Audi - Q5 - EA888 Gen 2 & 3 - 2.0 TFSI
Audi - TT / TTS (MK3) - EA888 Gen 3 - and 2.0 TFSI
VW - Golf / GTI / R (MK7) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275
Sale
We are proud to announce the release of our premium ball-bearing hybrid turbo with stainless steel exhaust housing for 2015+ MQB platform vehicles.
This high-performance hybrid turbo was designed by CTS engineers to fulfill the demand from customers who desire a direct-bolt-on turbo for their existing IS12, IS20 or IS38 turbocharger. Instead of trying to stuff a CHRA from a Mitsubishi into a factory housing; we re-designed and cast our proprietary STAINLESS STEEL exhaust housing to accommodate a larger turbine wheel. The compressor cover was also custom made and profiled to accept a very popular TD06 Billet compressor wheel, this ensures the turbocharger can reliably handle 30+ PSI. We upgraded the CHRA to a dual-ball bearing which is made from heat-resistant ceramic. Finally, we finished the assembly by balancing it on a VSR high-speed balancer.
This is a brand new turbocharger; no core or long wait times are required. Simply swap over your actuator and turbo outlet fitting for installation. Software tuning is required and it is available from most tuners.
Features:
- Complete brand new turbocharger; no need for core to be sent it or purchased
- Dual ceramic ball bearing direct-fit CHRA (compatible with all factory oil and coolant lines)
- Billet MHI-style TD06 compressor wheel
- High performance 9 blade turbine wheel
- Stainless steel turbine housing
- VSR Balanced to exceed OE tolerances
- Compatible with most tuning solutions for hybrid turbos (United Motorsport, Eurodyne, COBB)
- Compatible with OE or replacement wastegate actuators (CTS-WGA-200 actuator recommended)
- Compatible with OE or aftermarket turbo inlets and turbo outlets
Fitment:
- 2015+ VW Golf/Sportwagen/Alltrack
- 2015+ VW GTI
- 2015+ VW Golf R
- 2019+ VW Jetta GLI
- 2018+ VW Arteon
- 2015+ Audi A3
- 2015+ Audi S3
- 2015+ Audi TT
- 2015+ Audi TTS
NOTE: Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Always replace engine oil.
Gaskets, wastegate actuator, turbo outlet fitting not included.
Regular Price:
$2,999.00
Special Price
$2,399.00
Sale
IE ULTIMATE PERFORMANCE VALVE SPRING & RETAINER KIT FOR 2.0T TSI
This high-quality IE Valve Spring & Titanium Retainer kit features spring rates optimized to match your 2.0T FSI/TSI specifications and provide proper valve control preventing valve float in high-power and high-revving applications.
LEADING FEATURES
- Protects against engine failure from valve float
- Safely increase your rev limit and power band
- Nan-peened valve springs provide long life
- In-house CNC machined retainers from titanium
- Optimized design for all EA113/EA888 2.0T engines
- Highest quality spring material available in the world
- Torture tested in-house for high-power reliability
INCLUDED IN KIT
- 16 PRECISION WOUND INTAKE/EXHAUST VALVE SPRINGS
- 8 EXACT TOLERANCE TITANIUM INTAKE RETAINERS
- 8 EXACT TOLERANCE TITANIUM EXHAUST RETAINERS
WHY DO I NEED A SPRING & RETAINER KIT?
Increasing your engine's power output often comes with modifications that require more RPMs to get the most out of it, such as larger turbochargers, tuned intake manifolds, and high-output software tunes. Upgrading those components without changing out the valve springs can leave you with a short power band or cause valve float and other significant damage.
ONLY TRUST YOUR ENGINE TO THE BEST
Other cheap valve spring kits are often designed by simply finding a spring that is stiffer and will fit. Those are also not usually a good compromise because many times they are the wrong stiffness, and often poorly constructed. A broken valve spring can cause total engine failure and destroy everything that you have put hard work and money into. Our kits are the only spring and retainer kits on the market designed by someone with a working knowledge of the unique valvetrain in the VW & Audi EA113 FSI engines, and what the spring requirements actually are.
THE ULTIMATE SPRING & RETAINER KIT
Manufactured out of the best spring wire in the world IE valve springs use a patented multi-stage shot peening process that further reduces failure rates. Our titanium retainers are machined with an excellent surface finish and tight tolerance control for a long lifespan. Each application is thoroughly tested to perform on these engines right here in our test facility in Salt Lake City, Utah. Our spring and retainer kits are the best matched, most tested parts on the market. Purchasing a set will ensure that your engine runs at maximum performance and reliability.
Regular Price:
$1,015.00
Special Price
$985.00
DESCRIPTION
We are proud to release the new our CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5. As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump). While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system. CTS has developed a fully integrated fueling system, which utilizes a Walbro 450LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 500HP. If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.
NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.
Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.
Product Details:
– Genuine Walbro High Output in-tank 450LPH E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners
Fitment:
- 2015 – current VW Golf (incl Sportwagen and AllTrack)
- 2015 – current VW GTI (incl Rabbit)
- 2015 – current VW Golf R
- 2015 – current Audi A3
- 2015 – current Audi S3
- 2017 – current Audi A4/A5/AllRoad
CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles. The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow. Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance.
The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!!
The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine!
Features:
- Designed to fit factory airbox and any turbo inlet pipe
- 5-ply silicone construction
- Smooth interior
- High strength hose clamps
Components:
1 x CTS Turbo MQB Turbo Inlet Hose
2 x Hose clamps
Fits the following vehicles:
- MK7 VW GTI
- MK7 VW Golf R
- MK7 Audi A3
- MK7 Audi S3