VW MK7.5 Golf R Rear Valance
Details:
The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
All new diffuser fins featuring Flow-Lock interlocking integral assembly system allows installation without the need of tools or fasteners.
No more double sided tape, nuts, bolts and "L" brackets.
Strong, secure, easy installation.
This part is only compatible with our new and upcoming VW MK7.5 R kit.
Read More
Kit Includes:
Centre Valance
2 Flow Designs Stickers
Fitting kit
Material:
Valance: 10mm thick polyethylene composite, bevelled edges
Flow-Lock Diffuser Fins: 4.5mm thick textured ABS
Finish:
Valance: Hand polished satin black
Rear spats not included
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Volkswagen MK7.5 Golf GTI/R Adjustable Rear Spat Winglets (Pair)
Details:
The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf GTI & R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
VW MK7.5 Golf GTI/R Rear Winglets are only compatible with Flow Designs MK7.5 GTI/R rear spats only which are designed to be an adjustable direct bolt-on accessory.
Adjustable anywhere between 0mm - 20mm on each side increasing the overall width up to 40mm.
Kit Includes:
Adjustable Rear Spat Winglets (Pair)
2 Flow Designs Stickers
Fitting kit
*** Rear spats are not included ***
Material:
4.5mm thick ABS plastic
Finish:
Scratch resistant textured ABS plastic
Fits Models:
VW MK7.5 Golf GTI 3 Door
VW MK7.5 Golf GTI 5 Door
VW MK7.5 Golf R 3 Door
VW MK7.5 Golf R 5 Door
Night Time Brightness
We have found 6000K colour temperature LEDs not only look great, they work best with reverse cameras, especially VW component RGB cameras
The IE Catted Cast Downpipe for VW & Audi MQB incorporates the best of all worlds. Cast bend sections enable the highest flow and best fitment possible. Impressive performance gains will be realized when used with an IE stage 2 ECU tune. Lastly, the aggressive sound from an unrestricted exhaust system is guaranteed to be music to your ears.
Product Features
• Proven performance gains
• 76mm (3 inch) tubing replaces restrictive 60mm factory tubing
• Bolt on fitment - no hassle or poorly fitting parts when you choose IE
• Constructed of 304 stainless piping - long-lasting and high-quality material
• Thick turbo flange - prevents leaks and warping
• High flow 200 cell catalytic converter - full power with reduced pollution and smell
• Metal matrix catalytic structure -
• OEM style flex section - allows for more adjustment and won’t fail
• All inclusive kit - downpipe, mid pipes, all hardware
• TIG welded construction - equates to long-lasting welds that are less likely to fail
• Install instructions - available by CLICKING HERE
MQB PERFORMANCE DOWNPIPE OVERVIEW
When upgrading your VW MK7 or Audi 8V A3 to stage 2 software you will also need to reduce the back pressure caused by the small diameter stock pipe. With the exhaust system flowing better performance gains be achieved. Turbo lag should also be reduced as an added benefit.
IE engineers guarantee a perfect fit by designing all IE downpipes in-house using the latest technology. Digital scanning is using to scan the entire environment which ensures that there is proper clearance and that all mounting points are in the correct location. Manufactured from 304 stainless offers a life-long product that brings performance and fun to the table for years to come.
POWER GAINS
The most power gains will be achieved when the IE Downpipe is paired with IE matching software, air intake, and FDS intercooler.
SOUND TUNING
An aggressive and drone-free sound will be emitted from the IE Cast Downpipe. This should be music to your ears! Thick wall tubing and cast sections remove much of “tinny” sound emitted by cheaper, thin wall, downpipes. With downpipes, you get what you pay for in terms of sounds and overall manufacturing quality.
HIGH-FLOW CATALYTIC CONVERTER
IE’s performance downpipe includes a high-flow 200 cell per inch metal matrix catalyst located as close to the turbo as possible. Metal matrix catalysts are higher performance because the matrix web is thinner, allowing higher flow in the same size. Our catalyst is also a very large diameter, allowing a large flow area and maximum power. By being placed close to the turbo, emissions and unwanted unpleasant smells are greatly reduced.
DIRECT BOLT-ON WITH PERFECT FITMENT
The IE downpipe replaces over 6 feet of restrictive factory exhaust tubing, all the way back to the OE “Cat-Back” rear section. Sturdy fabricated mounts and precise engineering result in a rattle free and long last replacement exhaust system. 3D scanning systems were employed to ensure perfect placement both in pre and post-production phases.
INSTALLATION
Installation should be completed by a professional and preferably on an auto lift. CLICK HERE to view and download the install guide.
*This product is not CARB certified and thus is not available for purchase in the state of California.
VEHICLE FITMENT
Audi - A3 MK3/8V 1.8T & 2.0T engines (FWD only)*
VW - GTI MK7 2.0T engine
VW - GTI MK7.5 2.0T engine
VW - Golf MK7 1.8T & 2.0T engine (FWD only)*
VW - Golf MK7.5 1.8T & 2.0T engine (FWD only)*
*This downpipe system includes a mid pipe that is specially designed to fit Gen 3 1.8T and 2.0T engines in front-wheel drive (FWD) vehicles only. All-wheel drive (AWD) Quattro, or 4 Motion vehicles require a different mid pipe section included in our AWD MQB downpipe kit IE Part Number: IEEXCI1. Please verify if your vehicle is AWD or FWD before ordering.
ADDITIONAL REQUIRED MODIFICATIONS
Installing a downpipe to your Gen 3 1.8T or 2.0T vehicle requires a matching stage 2 ECU tune to operate properly.
VW MK7/MK7.5 & AUDI 8V 2018+ DSG TUNE
Don't short shift your ECU tune and performance parts, get the most out of your modifications with the IE DSG Transmission tune for 2019+ GLI, GTI, Golf R, A3, S3 2.0T. Instantly gain increased power, higher RPM limit, faster shifts, optimized shift points, and a true performance tuned transmission. Acceleration times will greatly improve transforming your 2.0T into a fully rounded performance monster.
DSG TUNE FEATURES
Required for high torque IE ECU tunes
Lightning fast gear shifts
Kick down in manual mode eliminated
Lag time reduced when starting off in first gear
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
REQUIRED FOR SELECT ECU TUNES
Required for GLI, GTI, Golf R, A3, & S3 Stage 1 high torque and all Stage 2 tune files, your new transmission tune will no longer lug the engine in drive mode, or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. To get the most out of your tune investment, a lot of features have been added to make a fully rounded performance vehicle with more aggressive launches, faster shifting, higher RPM, and optimized shift points. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
ALL INCLUSIVE DSG FILE, NO STAGES
That's right, your IE DSG tune is all-inclusive and does not offer expensive "Stage" upgrades. All features for any ECU stage are included in the tune and will never require unnecessary upgrade charges.
IE POWERlink DIRECT PORT FLASH TOOL
IE's POWERlink direct port flash tool is required to flash your ECU (engine control unit) or TCU (transmission control unit) and is available separately. The POWERlink tool is sold with all new IE ECU tunes and can also be used to flash your new DSG tune. If you already own an IE POWERlink unit, purchasing this file will add the credits to your cable within one working day. If you do not own a POWERlink cable, please chose to add one in the drop-down menu above.
POWERlink FEATURES:
FILE SWITCHING
The POWERLink cable allows for map switching without making a trip back to an IE Software dealer.
EASY OPERATION
Simply plug your IE PowerLink cable into your vehicle’s OBD-II port and the USB port on your Windows-powered laptop to use the included IE Flash Wizard software. The flash wizard will then walk you through the installation steps.
FLASH MULTIPLE CARS
Have a friend with a compatible VW or Audi? Share the power with up to 5 different cars with a single cable. Just add enough credits to your cable for the desired tune and power-up your entire crew.
RETURN TO STOCK ANYTIME
With the IE PowerLink, you can return your vehicle back to original ECU or TCU programming at any time.
EASY UPDATES
IE will always provide free software updates as they become available and easily reflashed through your IE PowerLink cable.
SYSTEM REQUIREMENTS
Laptop or tablet with Wifi connection and USB port running Windows 7 or newer operating system required. Powered by 32 or 64-bit processor with 1.0GHz or greater and 4GB of Ram. Windows NT not supported.
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your turbocharged Gen 3 TSI with IS20 Turbo engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The MQB 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
KICK DOWN REMOVED IN MANUAL MODE
The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI Gen 3 engine and transmission.
VEHICLE FITMENT
VW - GTI 2019+ (MK7.5) W/DSG TRANSMISSION
VW - GLI 2019+ (MK7) W/DSG TRANSMISSION
VW - GOlf R 2018+ (MK7.5) W/DSG TRANSMISSION
AUDI - A3 2019+ (8V) W/ DSG TRANSMISSION
AUDI - S3 2018+ (8V) W/ DSG TRANSMISSION
Whether you're seeking stronger, wider night peripherals or a simple colour temperature update, these high output fog lights provide a super quick, plug n play solution without traditional resistors, decoders or coding.
MODERN UPGRADE. TIMELESSLY HYPER-WHITE.
See Every Detail. CRI 90<
DETAILS
Compatible with all Golf MK7 equipped with halogen fog lights. Not compatible with LED fog light equipped models.
MK7 Golf GTI front lip splitter with bumper reinforcement bracket
MK7 Golf GTI side skirt splitters
MK7 Golf GTI rear spats
MK7 Golf GTI rear valance & fairing
Please select your choice of Extension OR Winglet Accessories OR ALL Accessories in the MK7 Golf GTI range (MK7 Golf GTI front extensions,MK7 Golf GTI front winglets, MK7 Golf GTI side winglets, MK7 Golf GTI rear winglets)
ADD:Rear Window Vents (Pair),Rear Spoiler Extension&/orFire Extinguisher Bracket/Mount if desired.
Please note you are receiving a special price when you purchase the VW MK7 Golf GTI complete body kit splitter set.
DETAILS:
Get the original and best splitter kit from Flow Designs Australia, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and tuners worldwide. Being the first to conceptualise, develop and manufacture the strongest lip splitters on the market, all our splitter components are backed by our unbeatable 10 year warranty (excludes all ABS accessories). Our 10mm polyethylene composite used in our splitter range is completely shatter-resistant and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are.
The MK7 Golf GTI splitter kit is completely designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your splitter kit, it is hand-finished, polished and quality inspected by our team to ensure you receive parts of the highest quality and craftsmanship.
All our splitter products are precision designed to accurately suit OEM bumpers/side skirts. Everything is model specific so perfect fitment is guaranteed, and instructions are provided for easy installation process (which can be completed with simple hand tools).
The Volkswagen MK7 Golf GTI body kit range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.
We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
VOLKSWAGEN MK7 GOLF GTI FULL LIP SPLITTER KIT INCLUDES:
MK7 Golf GTI front lip splitter & bumper reinforcement bracket
MK7 Golf GTI side skirt splitters (pair)
MK7 Golf GTI rear valance & fairing
MK7 Golf GTI rear spats/pods (pair)
WITH All Accessories Package OR Winglets Package: MK7 Golf GTIadjustable front winglets (pair)
WITH All Accessories Package OR Winglets Package: MK7 Golf GTI adjustable side winglets(pair)
WITH All Accessories Package OR Winglets Package: MK7 Golf GTI adjustable rear winglets(pair)
WITH All Accessories Package OR Extensions Package: MK7 Golf GTI adjustable front extensions(pair)
x2 Flow Designs stickers
x1 Flow Designs air freshener
Fitting kit
VOLKSWAGEN MK7 GOLF GTI FULL LIP SPLITTER KIT MATERIAL & FINISH:
Front lip splitter, side skirt splitters, rear valance, rear pods/spats: 10mm thick polyethylene composite, bevelled edges, impact-resistant
Hand polished satin black
Rear fairing, winglets and extensions: scratch resistant textured ABS plastic
Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
HOW STRONG ARE OUR SPLITTERS?
FAQ
HOW IS YOUR SPLITTER SO STRONG?
Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper.
WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!)
WHAT ABOUT CARBON FIBRE?
As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable.
USE OF ABS PLASTIC
Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.
Volkswagen MK7.5 Golf R Full Splitter Set - Option 1 (Front + Side + Rear Spats + Rear Valance & Fairing + All Accessories)
Details:
Please note you are receiving a special price when you purchase the MK7.5 R complete splitter set. Please select your choice of WITHOUT accessories or WITH all accessories in the MK7.5 R range.
Option 1 (currently selected) includes all items in the set with the rear valance and fairing.
Option 2 includes all the items in the set with the rear valance and Flow-Lock diffuser fins.
The Flow Designs splitter set is the best exterior mod for your VW MK7.5 Golf R! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
Front splitter, side splitter, rear spats and all accessories included + rear valance & fairing.
Kit Includes:
Front splitter & Aerospacers
Cross bar drilling template (for stud installation)
Side Splitters (Pair)
Rear valance & fairing
Rear spats (Pair)
WITH all accessories package: Adjustable front extensions (Pair)
WITH all accessories package: Adjustable front winglets (Pair)
WITH all accessories package: Adjustable side winglets (Pair)
WITH all accessories package: Adjustable rear winglets (Pair)
2 Flow Designs stickers
Fitting kit
Material:
Front splitter, side splitters, valance, rear spats: 10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Flow-Lock fins and rear fairing: scratch resistant textured ABS plastic
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.