Volkswagen - CTS Turbo - Eibach

Dual port boost tap allows for multiple boost references CNC machined from 6061 Aluminium Brass plug included

At CTS Turbo we are proud to announce our new air intake system for the transverse 2.0T FSI EA113 VW/Audi range of vehicles.

The air scoop works in conjunction with our sealed airbox to seamlessly force cold air into our 2.75″ air intake system.  Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing.  Our CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 9-15WHP. By using a factory MAF position, you can be sure that fuel trims will remain perfect.

All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.

This intake kit is designed to be compatible with our FSI EA113 BOSS kits; intake pipe features 2x 1/8″ bungs and 1x 1/2″ bung for easy installation of BOSS kits. Plugs are included.

Product Details:

• Full 2.75″ Mandrel-bent aluminum piping with black powder coating
• Compatible with CTS BOSS kits, with provisions for easy installation
• Reusable 3″ air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Air box with rubberized trim
• Bracketry to prevent rattling under engine torquing
• Gains ranging from 9-15WHP on stock vehicle, even more if tuned!
• No CEL, no fuel trim issues

Fitment:

• MK5 VW GTI incl. Edition 35 (2006-2008)
• MK5 VW GLI (2006-2008)
• MK5 VW EOS (2006-2008)
• MK6 VW Golf R (2012-2013)
• MK2 SEAT Leon (2006-2009)
• MK2 SEAT Cupra R (2006-2012)
• B6 VW Passat (2006-2010)
• 8P Audi S3 (2006-2013)

At CTS Turbo we are proud to announce our new 3″ air intake system for the 1.8TSI and 2.0T Gen1 and Gen3 VW/Audi range of vehicles. This kit includes parts that make it compatible with both generations of TSI engines!

The air scoop works in conjunction with our sealed airbox to seamlessly force cold air into our 3″ air intake system.  Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing.  Our 3″ CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 9-15WHP. By using a factory MAF housing (when equipped), you can be sure that fuel trims will remain perfect.

All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.

This intake kit is designed to be compatible with our TSI Gen1 BOSS kits; intake pipe features 2x 1/8NPT bungs for easy installation of BOSS kits.

Product Details:

• Full 3″ Mandrel-bent aluminum piping with black powder coating
• Compatible with CTS BOSS kits, with provisions for easy installation
• Reusable air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Airbox with rubberized trim
• Bracketry to prevent rattling under engine torquing
• Gains ranging from 9-15WHP on a stock vehicle, even more, if tuned!
• No CEL, no fuel trim issues

GEN1 Fitment (EA888.1)

• MK5 GTI with TSI motor (2009)
• MK5 Jetta with TSI motor (2009-2010)
• MK6 GTI (2010-2013)
• MK6 Jetta GLI (2012-2013)
• EOS with TSI motor (2009-2016)
• Passat CC TSI (2009-2013)
• New Beetle TSI (2010-2013)
• Scirocco TSI (2008-2017)
• Audi A3 TSI (2009-2013)

GEN3 Fitment (EA888.3 non-MQB)

• Volkswagen Beetle (MK2)
• Volkswagen Jetta (MK6) 18TSI & GLI (2013.5-2018)
• Volkswagen Scirocco (MK3)
• Volkswagen Passat 1.8TSI & 2.0TSI (B7)

Large inside diameter for extremely high flow Cast aluminum with CNC machined flanges Compatible with any intake system, including stock Durable aluminum construction, will not break like factory plastic part Simple installation Includes new o-ring Faster turbo spool, more airflow, improved turbo sound!

The CTS Turbo TSI Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle. Our Turbo Outlet Pipe features 2.25" diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25" coupler and premium clamps top this package off. If you're looking for a simple bolt on modification that will optimize flow and increase power, then this part is for you.

CTS Turbo is proud to release our B-Cool Billet Oil Filter Housing.  The OE plastic filter housing is quite fragile and is know to become brittle and crack over time.  Each CTS Turbo B-Cool Billet Oil Filter Housing is constructed in house from T6061 Aluminum.  Not only does the B-Cool filter look good, but it works great.  We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.

Installation is very straight forward and only required basic hand tools:

Drain oil from filter housing, use a 36mm socket to remove the factory oil filter housing, install new filter, install new filter housing o-ring to CTS housing, reinstall on the car and tighted to 18 ft/lbs, refill engine oil.

Product Details:

•   Made in Canada from billet T6061 Aluminum
•   Hard anodized black for stealth and longevity (machined finish shown)
•   Uses OEM O-ring
•   Installation of CTS-HW-0242 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
•   OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
•   Compatible with OEM Filter

The CTS B-Cool Billet fits Audi, VW, Seat, Skoda models with EA113 2.0T FSI engines, 2.5L 5-cylinder engines and 2.5T 5-cylinder turbo engines.

This part replaces the OE part# 06D 115 408B and 07K 115 408.

Fitment:

• MK6 Golf R, MK5 GTI (FSI), 8P Audi A3 (FSI), MK2 Audi TT-S (FSI)
• MK5 and MK6 Golf, Jetta 2.5 5-cylinder
• 8P Audi RS3 (not for facelift model)
• MK2 Audi TT-RS (not for facelift models)

Eibach Sportline Sport Performance Springs Pure Sport Suspension Springs and Appearance

This is a CTS Turbo universal 3.5″ cone filter, it has a tapered design primarily used in our MK7 GTI/GOLF R, B9 AUDI A4, B8/B8.5 S4, S5  intake kits.  These filters can also be used in a custom big turbo application.

Product Details:

3.5″ Inlet x 8.0″ Long x 6.0″ Wide
High quality moulded silicon base and cap
Stainless steel clamp

Fitment:

• CTS-IT-270R or CTS-IT-270
• CTS-IT-290
• CTS-IT-300

Eibach PRO-KIT Performance Springs World‘s leading Performance Suspension Spring System

Description:

Eibach performance lowering springs Pro-Kit

The absolute top seller. The number one choice of automotive enthusiasts worldwide. The Eibach Pro-Kit springs are the ideal solution for your series vehicle . The proven spring system maximizes the handling of your vehicle and ensures a sporty look .

The Pro-Kit lowers the center of gravity of your vehicle and reduces the rebound during accelerating, reduces the tendency of the body to roll when cornering and the dipping when braking drives.

The Eibach Pro-Kit in combination with appropriate wheels and tires is the guarantee of success for optimal performance. The lowering with Eibach Pro-Kit springs reduces the unnecessary distance between the tires and the wheelhouse and gives the vehicle a sporty look.

Eibach Pro-Kits are designed by Eibach's chassis engineers and test experts designed to deliver a combination of sporty looks and performance without sacrificing safety or ride quality.

A leading performance suspension spring system worldwide
tested for the combination with stock and retrofit dampers
First step towards a complete sport suspension system
Lower center of gravity – lowers vehicle up to 40 mm (depending on the vehicle)
Spring design for traction and attraction
Progressive spring design
Performance Handling
ABE or parts certificate

Compatible Vehicles:

Manufacturer	Model	Type	Lowering in mm (FA/RA)	Axle load (FA/RA)
VW	CC B7 (358)	2.0 TDI	25/20	-> 1170Kg/ -> 1050kg
VW	CC B7 (358)	2.0 TFSI	25/20	-> 1170Kg/ -> 1050kg
VW	CC B7 (358)	2.0 TSI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 BlueTDI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TDI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TFSI	25/20	-> 1170Kg/ -> 1050kg
VW	PASSAT CC B6 (357)	2.0 TSI	25/20	-> 1170Kg/ -> 1050kg