Volkswagen - Forge Motorsports - H&R Springs - Integrated Engineering - SuperPro - VW Central - Whiteline
Sale
Regular Price:
$275.00
Special Price
$255.00
DESCRIPTION
CTS Turbo is proud to release our 3.0T Supercharger Pulley Upgrade for the Gen 2 3.0T, commonly found in late 2016-2018 B8.5 Audi S4/S5 as well as A6, A7, Q5, SQ5 and Q7
THIS IS THE BOLT-ON STYLE PULLEY KIT. CHECK ON YOUR CAR FOR COMPATIBILITY.
CTS pulley is a smaller diameter than stock. Stock pulley size is 63.25, the CTS pulley is 57.3mm; this will increase the speed at which the supercharger spins, increasing the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on supercharger or engine components.
NOTE: CTS 3.0T Supercharger Pulley Upgrade must be used with appropriate “Stage 2” performance software.
Stage 2+ performance software (not included) will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed off.
Most Stage 2+ software tunes are compatible with this kit.
Product Details
- Made in house at CTS Turbo in Canada
- Precision CNC machined from billet ASI303 stainless steel – best on the market! No other pulley manufacturer uses this steel.
- OEM-spec honing and tolerances
- Boost increased from stock 11psi to 15psi, boost holds steady all the way up to redline
- Nitride coated for long-lasting OEM looking finish
- Includes belt and bolts required for install
- Stock Size: 63.25mm, CTS Size: 57.3mm
Fitment:
- 2016-2018 B8.5 Audi S4, S5, Q5, SQ5 with 3.0T SUPERCHARGED engine
- 2016+ C7.5 Audi A6, A7 with 3.0T SUPERCHARGED engine
- Late Audi Q7 with 3.0T SUPERCHARGED engine
EXPLORE WITH CONFIDENCE
Upgrading your IE 5" velocity stack intake with our harsh climate filter kit will further keep your engine safe when traveling on dirt roads, sandy beaches, or anywhere with dusty contaminants in the air.
KIT DETAILS
This complete filter kit uses a 3 step approach to combat harsh climates. The filter has been increased from a 6 pleat construction to 8 pleats to increase cotton density. The cotton pleats are then treated with a penetrating filter oil to further catch and trap particulates. As a final measure, a pre-filter sock adds a final layer of protection over the filter. Together, these 3 barriers offer superior filtration for your intake system over our standard performance air filter.
KIT CONTENTS:
- 1X IE oiled 8 pleat density performance 5" filter
- 1X IE pre-filter intake sock
- 1X Air filter worm clamp
RECHARGING
As the air filter does its job of effectively catching more particulates, eventually it will have to be cleaned and maintained. We recommend washing your cotton filter in water with a little Dawn dish soap, rinsing thoroughly, and allowing it to completely air dry. To replace the oil, any off-the-shelf filter oil kit from your local auto parts supply chain can be used. Do not over-oil the filter, a little goes a long way.
COMPATIBLE INTAKES
Our 5" Harsh Climate Oiled Air Filter & Sock Upgrade Kit is a direct replacement filter for all popular IE air intake kits with a 5" velocity stack.
- IEINCI11 - IE MQB 2.0T/1.8T Gen 3 Cold Air Intake
- IEINCK3 - IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
- IEINCG2A - IE Audi 3.0T Cold Air Intake For B8/B8.5 S4 & B8.5 S5
- IEINCN1 - IE Audi 3.0T Cold Air Intake For C7 A6 & A7
- IEINSG1 - IE Audi 3.0T Cold Air Intake For 8R SQ5 & Q5
- IEINCG1 - IE Audi 2.0T TSI Cold Air Intake For B8/B8.5 A4 & A5
- IEINCK1 - IE Audi B9 A4 & A5 Cold Air Intake
- IEINCW1 - IE Cold Air Intake System For VW MQB Tiguan 2.0T
- IEINCV1 - IE Performance Intake System For VW Atlas 2.0T
- IEINCC2 - IE 2.0T TSI Cold Air Intake For VW MK5, MK6 GTI, Jetta, CC & 8P A3
- IEINCB4 - IE 2.0T FSI Cold Air Intake Kit For MK6 Golf R, A3, MK5 GTI, Jetta
- IEINCC4 - IE Gen 3 2.0T/1.8T Cold Air Intake For 2013-2018 MK6 Jetta & GLI
- IEINCJ1 - IE Carbon Fiber Intake For Audi TTS MK2
- IEINCI4 - IE VW 1.4T Cold Air Intake For VW MK6 Jetta
Sale
Regular Price:
$929.00
Special Price
$836.00
Sale
VW MK7/MK7.5 & AUDI 8V 2018+ DSG TUNE
Don't short shift your ECU tune and performance parts, get the most out of your modifications with the IE DSG Transmission tune for 2019+ GLI, GTI, Golf R, A3, S3 2.0T. Instantly gain increased power, higher RPM limit, faster shifts, optimized shift points, and a true performance tuned transmission. Acceleration times will greatly improve transforming your 2.0T into a fully rounded performance monster.
DSG TUNE FEATURES
Required for high torque IE ECU tunes
Lightning fast gear shifts
Kick down in manual mode eliminated
Lag time reduced when starting off in first gear
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
REQUIRED FOR SELECT ECU TUNES
Required for GLI, GTI, Golf R, A3, & S3 Stage 1 high torque and all Stage 2 tune files, your new transmission tune will no longer lug the engine in drive mode, or short shift the larger powerband. Clutch clamping forces are increased so the transmission can safely handle and deliver the increased power and torque. To get the most out of your tune investment, a lot of features have been added to make a fully rounded performance vehicle with more aggressive launches, faster shifting, higher RPM, and optimized shift points. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
ALL INCLUSIVE DSG FILE, NO STAGES
That's right, your IE DSG tune is all-inclusive and does not offer expensive "Stage" upgrades. All features for any ECU stage are included in the tune and will never require unnecessary upgrade charges.
IE POWERlink DIRECT PORT FLASH TOOL
IE's POWERlink direct port flash tool is required to flash your ECU (engine control unit) or TCU (transmission control unit) and is available separately. The POWERlink tool is sold with all new IE ECU tunes and can also be used to flash your new DSG tune. If you already own an IE POWERlink unit, purchasing this file will add the credits to your cable within one working day. If you do not own a POWERlink cable, please chose to add one in the drop-down menu above.
POWERlink FEATURES:
FILE SWITCHING
The POWERLink cable allows for map switching without making a trip back to an IE Software dealer.
EASY OPERATION
Simply plug your IE PowerLink cable into your vehicle’s OBD-II port and the USB port on your Windows-powered laptop to use the included IE Flash Wizard software. The flash wizard will then walk you through the installation steps.
FLASH MULTIPLE CARS
Have a friend with a compatible VW or Audi? Share the power with up to 5 different cars with a single cable. Just add enough credits to your cable for the desired tune and power-up your entire crew.
RETURN TO STOCK ANYTIME
With the IE PowerLink, you can return your vehicle back to original ECU or TCU programming at any time.
EASY UPDATES
IE will always provide free software updates as they become available and easily reflashed through your IE PowerLink cable.
SYSTEM REQUIREMENTS
Laptop or tablet with Wifi connection and USB port running Windows 7 or newer operating system required. Powered by 32 or 64-bit processor with 1.0GHz or greater and 4GB of Ram. Windows NT not supported.
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your turbocharged Gen 3 TSI with IS20 Turbo engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The MQB 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
KICK DOWN REMOVED IN MANUAL MODE
The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI Gen 3 engine and transmission.
VEHICLE FITMENT
VW - GTI 2019+ (MK7.5) W/DSG TRANSMISSION
VW - GLI 2019+ (MK7) W/DSG TRANSMISSION
VW - GOlf R 2018+ (MK7.5) W/DSG TRANSMISSION
AUDI - A3 2019+ (8V) W/ DSG TRANSMISSION
AUDI - S3 2018+ (8V) W/ DSG TRANSMISSION
Regular Price:
$999.00
Special Price
$950.00
Sway Bar Roll Control Kits provides Sharper steering and handling
Reduced body roll improves handling and increases tyre to road contact for safety and performance
Increased cornering capability & reduced body roll for your Audi A3 8V or VW Golf Mk7 FWD
Sway bar rates can increased by 30-50% over OE
- Australian owned
- 100% Fitment Guarantee
- Genuine quality brands
Improve the handling of your FWD Audi A3 or Volkswagen Golf Mk7 FWD
Eliminates sway bar link flex
Sale
Product Description
This will replace OEM part numbers 06H 145 710D, 06F 145 710G, & 06H 145 710 C
Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CJXB, CZPA, and CJXC;US codes CPLA and CPPA) including Golf MK7 R
This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp!
This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
In The Box:
1 x FMDVMK7R Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker