GTI/GTD - CTS Turbo - Leyo Motorsport - Supernova - XFORCE - P3 Cars - Eibach - VW Central - Flow Designs - INA
Description:
Looking dull in the engine bay? Want to spice it up a bit? Get your beloved MK5 GTI the bad ass 21st century look with the Leyo Motorsport MK5 GTI Cold Air Intake System.
Fabricated from high grade aluminum (very important, as many on the market use steel) this intake kit is lighter (again, vs steel) and less prong to heat soak (again… steel).
As this kit is compatible with the Golf MK6 Golf R, one day when you decide to level up to the 6R, you can pop your beloved Leyo intake right into the 6R’s engine bay
(don’t show the fellow that sold you the 6R too soon as he might want his car back).
*This product is only for use on the race track.
Specifications:
-
OEM fitment requires no fabrication.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Direct bolt on & easy installation.
-
Easy installation.
-
Intake Heat shield.
Description:
Presenting you the new Leyo Motorsport Double Cone high flow air filter. These performance air filter has an inverted filtration cone on the top to greatly increase filtration surface. It is available in 3” inlet. With the increased filtration surface, the engine no longer needs to gasp for air after you have mod your ride. Filtration surface is made from nonwoven fabric providing superior filtration.
*This product is only for use on the race track.
Specifications:
-
High airflow with superior filtration.
-
Clamp on design for easy installation.
-
Top inverted filtration cone for maximum air flow.
-
For MK5 GTI / MK6 R cold air intake system replacement.
At CTS Turbo we are proud to announce our new 3″ air intake system for the 1.8TSI and 2.0T Gen1 and Gen3 VW/Audi range of vehicles. This kit includes parts that make it compatible with both generations of TSI engines!
The air scoop works in conjunction with our sealed airbox to seamlessly force cold air into our 3″ air intake system. Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing. Our 3″ CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 9-15WHP. By using a factory MAF housing (when equipped), you can be sure that fuel trims will remain perfect.
All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.
This intake kit is designed to be compatible with our TSI Gen1 BOSS kits; intake pipe features 2x 1/8NPT bungs for easy installation of BOSS kits.
Product Details:
- Full 3″ Mandrel-bent aluminum piping with black powder coating
- Compatible with CTS BOSS kits, with provisions for easy installation
- Reusable air filter with inverted cone design
- 4 Ply silicon connectors with stainless steel clamps
- Airbox with rubberized trim
- Bracketry to prevent rattling under engine torquing
- Gains ranging from 9-15WHP on a stock vehicle, even more, if tuned!
- No CEL, no fuel trim issues
GEN1 Fitment (EA888.1)
- MK5 GTI with TSI motor (2009)
- MK5 Jetta with TSI motor (2009-2010)
- MK6 GTI (2010-2013)
- MK6 Jetta GLI (2012-2013)
- EOS with TSI motor (2009-2016)
- Passat CC TSI (2009-2013)
- New Beetle TSI (2010-2013)
- Scirocco TSI (2008-2017)
- Audi A3 TSI (2009-2013)
GEN3 Fitment (EA888.3 non-MQB)
- Volkswagen Beetle (MK2)
- Volkswagen Jetta (MK6) 18TSI & GLI (2013.5-2018)
- Volkswagen Scirocco (MK3)
- Volkswagen Passat 1.8TSI & 2.0TSI (B7)
The CTS Turbo TSI Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.
Our Turbo Outlet Pipe features 2.25" diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25" coupler and premium clamps top this package off. If you're looking for a simple bolt on modification that will optimize flow and increase power, then this part is for you.
Description:
LEYO Cold Air Intake System guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed heat shield is also included to prevent heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.
*This product is only for use on the race track.
Specifications:
-
OEM fitment requires no fabrication.
-
3.5’inch diameter for greater air induction.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Direct bolt on & easy installation.
-
Easy installation.
Sale
MODERN UPDATED STYLING – ERROR FREE – NO CODING
Specifically for VW Golf Mk6
Regular Price:
$149.00
Special Price
$99.00
Sale
Regular Price:
$599.00
Special Price
$519.00
Sale
.
XFORCE FOR VOLKSWAGEN GOLF GTI MK6 & SCIROCCO R! AVAILABLE NOW.
Regular Price:
$1,300.00
Special Price
$1,145.00
WHAT IS THE SMART BOX?
Varex Smart Box is a control device with patent pending technology that let the user to manually and automatically adjust the exhaust sound level of the Varex exhaust.
The users can operate and make change to the settings of the Smart Box via an elegantly designed Smartphone App.
The connections between the Smart Boxes and the smart phones are via the latest Bluetooth® technology, which provides an exceptionally reliable and smooth user experience.
Smart Box provides the following functions:
-
MANUAL MODE:
-
MATRIX MODE:(ONLY WORK WITH VEHICLES EQUIPED WITH OBDII)