GTI/GTD - CTS Turbo - Integrated Engineering - SuperPro - Eibach - Autotech
Sale
Description
We are proud to release the new our CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5. As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump). While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system. CTS has developed a fully integrated fueling system, which utilizes a Walbro 525LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 600HP. If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3.5 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.
NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.
Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.
Product Details:
– Genuine Walbro High Output in-tank 525LPH HELLCAT E85 compatible Fuel Pump
– Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
– CTS CNC machined/black hard anodized pump adapter
– CTS CNC machined/black fuel pump spacers
– CTS CNC machined/black fuel pump venturi standoff
– Viton O-ring
– Nylon wire crimps
– Drill bits
– Stainless steel fasteners
Fitment:
- 2015 – current VW Golf (incl Sportwagen and AllTrack)
- 2015 – current VW GTI (incl Rabbit)
- 2015 – current VW Golf R
- 2015 – current Audi A3
- 2015 – current Audi S3
- 2017 – current Audi A4/A5/AllRoad
The following VW fuel pumps are compatible: 5Q0919051BK, 5Q0919051BM
Regular Price:
$699.00
Special Price
$679.00
CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles. The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow. Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance.
The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!!
The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine!
Features:
- Designed to fit factory airbox and any turbo inlet pipe
- 5-ply silicone construction
- Smooth interior
- High strength hose clamps
Components:
1 x CTS Turbo MQB Turbo Inlet Hose
2 x Hose clamps
Fits the following vehicles:
- MK7 VW GTI
- MK7 VW Golf R
- MK7 Audi A3
- MK7 Audi S3
DESCRIPTION
CTS Turbo is happy to release our high flow turbo outlet pipe kit for MQB vehicles equipped with BOSS V3 kits or hybrid turbochargers. This part is perfect to compliment the 2.5″ turbo outlet on the BOSS V3 kit, making the installation seamless.
The CTS Turbo 2.5″ high flow turbo outlet pipe kit replaces all the factory charge piping between the turbocharger compressor housing and intercooler.
Product Details:
- 2.5″ turbo outlet fitting
- 2.5″ Aluminum piping
- OEM style pipe bracket
- High quality tig welds
- Durable powdercoat finish
- Fits all MQB models with BOSS V3 kit or hybrid turbos.
Hardware Included:
- 2.5″ Silicone coupler
- Lower turbo outlet pipe
- 2.5″ turbo outlet fitting
- Hose clamps
- Installation hardware
Fitment:
- VW Golf/AllTrack/Sportwagen 1.8TSI (2015 – 2020)
- VW GTI (2015 – 2021)
- VW Golf R (2015 – 2019)
- Audi A3 (2015 – 2020)
- Audi S3 (2015 – 2020)
- Audi TT/TT-S (2015-2020)
- VW Jetta GLI (2019 – 2020)
Vehicle Fitment
Model
Make | Model | Year | Generation |
AUDI |
A3 |
2015 - 2020 |
8V |
AUDI |
S3 |
2015 - 2020 |
8V |
AUDI |
TT |
2016 - 2020 |
8S |
VW |
GOLF |
2015 - 2020 |
MK7/7.5 |
VW |
GOLF R |
2015 - 2019 |
MK7/7.5 |
VW |
GTI |
2015 - 2020 |
MK7/7.5 |
Sale
The IE Catted Cast Downpipe for VW & Audi MQB incorporates the best of all worlds. Cast bend sections enable the highest flow and best fitment possible. Impressive performance gains will be realized when used with an IE stage 2 ECU tune. Lastly, the aggressive sound from an unrestricted exhaust system is guaranteed to be music to your ears.
Product Features
• Proven performance gains
• 76mm (3 inch) tubing replaces restrictive 60mm factory tubing
• Bolt on fitment - no hassle or poorly fitting parts when you choose IE
• Constructed of 304 stainless piping - long-lasting and high-quality material
• Thick turbo flange - prevents leaks and warping
• High flow 200 cell catalytic converter - full power with reduced pollution and smell
• Metal matrix catalytic structure -
• OEM style flex section - allows for more adjustment and won’t fail
• All inclusive kit - downpipe, mid pipes, all hardware
• TIG welded construction - equates to long-lasting welds that are less likely to fail
• Install instructions - available by CLICKING HERE
MQB PERFORMANCE DOWNPIPE OVERVIEW
When upgrading your VW MK7 or Audi 8V A3 to stage 2 software you will also need to reduce the back pressure caused by the small diameter stock pipe. With the exhaust system flowing better performance gains be achieved. Turbo lag should also be reduced as an added benefit.
IE engineers guarantee a perfect fit by designing all IE downpipes in-house using the latest technology. Digital scanning is using to scan the entire environment which ensures that there is proper clearance and that all mounting points are in the correct location. Manufactured from 304 stainless offers a life-long product that brings performance and fun to the table for years to come.
POWER GAINS
The most power gains will be achieved when the IE Downpipe is paired with IE matching software, air intake, and FDS intercooler.
SOUND TUNING
An aggressive and drone-free sound will be emitted from the IE Cast Downpipe. This should be music to your ears! Thick wall tubing and cast sections remove much of “tinny” sound emitted by cheaper, thin wall, downpipes. With downpipes, you get what you pay for in terms of sounds and overall manufacturing quality.
HIGH-FLOW CATALYTIC CONVERTER
IE’s performance downpipe includes a high-flow 200 cell per inch metal matrix catalyst located as close to the turbo as possible. Metal matrix catalysts are higher performance because the matrix web is thinner, allowing higher flow in the same size. Our catalyst is also a very large diameter, allowing a large flow area and maximum power. By being placed close to the turbo, emissions and unwanted unpleasant smells are greatly reduced.
DIRECT BOLT-ON WITH PERFECT FITMENT
The IE downpipe replaces over 6 feet of restrictive factory exhaust tubing, all the way back to the OE “Cat-Back” rear section. Sturdy fabricated mounts and precise engineering result in a rattle free and long last replacement exhaust system. 3D scanning systems were employed to ensure perfect placement both in pre and post-production phases.
INSTALLATION
Installation should be completed by a professional and preferably on an auto lift. CLICK HERE to view and download the install guide.
*This product is not CARB certified and thus is not available for purchase in the state of California.
VEHICLE FITMENT
Audi - A3 MK3/8V 1.8T & 2.0T engines (FWD only)*
VW - GTI MK7 2.0T engine
VW - GTI MK7.5 2.0T engine
VW - Golf MK7 1.8T & 2.0T engine (FWD only)*
VW - Golf MK7.5 1.8T & 2.0T engine (FWD only)*
*This downpipe system includes a mid pipe that is specially designed to fit Gen 3 1.8T and 2.0T engines in front-wheel drive (FWD) vehicles only. All-wheel drive (AWD) Quattro, or 4 Motion vehicles require a different mid pipe section included in our AWD MQB downpipe kit IE Part Number: IEEXCI1. Please verify if your vehicle is AWD or FWD before ordering.
ADDITIONAL REQUIRED MODIFICATIONS
Installing a downpipe to your Gen 3 1.8T or 2.0T vehicle requires a matching stage 2 ECU tune to operate properly.
Regular Price:
$1,629.00
Special Price
$1,499.00
Sale
Regular Price:
$929.00
Special Price
$836.00
Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI
VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
The CTS Turbo TSI Turbo Outlet Pipe (TOP) is designed to replace the narrow 'pancake' pipe that comes as factory equipment on your vehicle.
Our Turbo Outlet Pipe features 2.25" diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25" coupler and premium clamps top this package off. If you're looking for a simple bolt on modification that will optimize flow and increase power, then this part is for you.
Audi |
TT |
MK2 (2008-2015) |
2.0 TSI |
Audi |
A3 |
8P (2009-2013) |
2.0 TSI (FWD) |
Volkswagen |
Tiguan |
(2009-2011) |
2.0 TSI |
Volkswagen |
Tiguan |
(2012+) |
2.0 TSI |
Volkswagen |
Jetta |
MK5 (2010) |
2.0 TSI |
Volkswagen |
Jetta |
MK6 Sedan (2011-2017) |
2.0T GLI |
Volkswagen |
Jetta |
MK6 Sportwagen (2010-2017) |
1.8TSI/2.0TSI |
Volkswagen
Volkswagen
|
Jetta
Golf/GTI/Rabbit
|
MK6 Sedan (2014-2017)
MK5 (2009)
|
1.8TSI/2.0T GLI
2.0 TSI
|
Volkswagen |
Golf/GTI/Rabbit |
MK6 (2010-2014) |
2.0T |
Volkswagen |
CC |
(2009+) |
2.0 TSI |
Volkswagen |
Beetle |
Beetle (2012+) |
2.0 TSI |
CTS Turbo is proud to announce an official release of our new K04 Upgrade for 2.0T FSI/TSI Transverse Engines.
Our engineers designed the compressor cover and exhaust housing to work with the larger K04 CHRA, exactly how intended. While other manufacturers simply install a larger K04 CHRA into a small factory-spec housing.
Beware of these hybrid builds, they are not made to provide optimal flow for the larger turbine wheel and can lead to poor performance and premature failure.
High-quality castings are CNC machined to replace your factory turbocharger and do not require any additional parts to be installed. All you need to run this K04 2.0T FSI/TSI Transverse Turbocharger Upgrade is a tune for your ECU and a performance downpipe.
This kit is by far the best ‘bang for the buck’ modification available for VW and Audi enthusiasts with the 2.0T FSI and 2.0T TSI engine. With proper tuning and supporting mods, this turbo will support 350HP/360TQ!
Features:
CTS-spec K04 CHRA with heavy-duty thrust bearings
Billet compressor wheel (MFS – machined from solid)
K04-specific compressor and turbine housing. NOT A HYBRID!
OEM+ manufacturing tolerances
VSR high-speed balanced
Direct-fit factory replacement
OEM installation kit included
Compatible with any K04-specific tune
Compatible with factory turbo outlet pipe (both FSI and TSI). Not compatible with aftermarket stock turbo outlet pipes
ROW vehicles, please confirm fitment with your CTS Turbo dealer.
Additional parts required:
K04-specific software tuning
CTS Turbo or other performance downpipe
Additional parts recommended:
CTS Turbo Cold Air Intake
CTS Turbo Direct-Fit Intercooler Kit
CTS Turbo High Flow Turbo Outlet Pipe (EA888 only)
S3 Fuel Injectors and HPFP upgrade (EA113 engines only)
Sale
Regular Price:
$769.00
Special Price
$692.00