GTI/GTD - Forge Motorsports - H&R Springs - Leyo Motorsport - Integrated Engineering - Eibach - VW Central - Whiteline
Description:
A world first, paddle shift extension that is transparent. See your dashboard unobstructed through the clear extension as well as the glow of the cabin lighting and you might for a split second think they are not even there.
Sporty in looks and a joy to touch, rear surface has an ergonomic contour providing a delightful fingertip stimulus unmatched by the OE paddles.
Clear your mind as you blast down the racetrack; Clear your thoughts as you cruise along the coastline; Clear the clutter in front of you, Clear paddle shifter, a first by Leyo Motorsport.
SPECIFICATIONS
-
The ultimate addition to your performance vehicle.
-
Futuristic see-through design.
-
Enhance the look of your steering wheel, adding a sporty appearance.
-
Ergonomic rear surface.
-
Full replacement of the OE shifters in your vehicle.
-
3 minutes EASY install.
Description:
Get the latest in performance aesthetics with Leyo Motorsports light weight aluminium engine fluid caps. Made from the finest raw materials, these fluid caps will add that clean modified look to your engine bay without the messy installation. Designed in-house by our technical team, these caps are built to perfection to seamlessly integrate with your vehicle engine bay.
We offer four unique caps for the oil filler neck, the coolant reservoir, the brake fluid reservoir and finally the windshield washer tank. Changing these under the bonnet will add that unique personal touch and create an engine bay you’d be proud to show off with the confidence of performing better than the OEM parts. To make installation as simple as possible, we’ve included an Allen Set screw wrench for your new aluminium engine compartment oil caps.
Don’t wait, get the stylish appearance your car deserves from Leyo Motorsport today.
Specifications:
-
Constructed from T6061 Billet Aluminium for strength.
-
Hard coated anodized finish.
-
Visual improvements to the engine bay.
COMPATIBLE VEHICLES
VOLKSWAGEN
Year |
Model
|
Gen
|
Engine
|
2012-2019
|
Golf
|
MK7/7.5
|
1.8 TSI
|
2012-2019 |
Golf |
MK7/7.5 |
2.0 TDI |
2013-2019 |
Golf GTI |
MK7/7.5 |
2.0 TSI |
2014-2019 |
Golf R |
MK7/7.5 |
2.0 TSI |
2014-2019 |
e-Golf |
MK7 |
Electric Motor |
2015-2019 |
Golf SportWagen |
MK7/7.5 |
1.8 TSI |
2015-2019 |
Golf Alltrack |
MK7/7.5 |
1.8 TSI |
Available for all accessory cap looks like this.
WASHER FLUID RESERVOIR CAP
BRAKE FLUID RESERVOIR CAP
Description:
Add a touch of elegance to your center console by replacing the factory shift knob with this beautiful Leyo Billet DSG shift knob. Our shifting mechanism pays homage to manual transmission cars injecting a sense of fun when shifting. To shift, simply wrap your hands around our beautifully crafted shift knob and lift up the lever with your fingers to disengage the lockout.
The main knob is CNC’d from a single block of billet aluminum and then undergoes a six stage manual polishing. It is then anodized to offer protection to the aluminum from sweaty palms while also producing a classy hue. Available in Black or Silver, these shift knobs are a must have for your precious ride.
Specifications:
- Shifting at your fingertips.
- Easy installation.
- Anodize in Black or Silver.
COMPATIBLE FACTORY SHIFT KNOB
SKODA
Sale
The IE Catted Cast Downpipe for VW & Audi MQB incorporates the best of all worlds. Cast bend sections enable the highest flow and best fitment possible. Impressive performance gains will be realized when used with an IE stage 2 ECU tune. Lastly, the aggressive sound from an unrestricted exhaust system is guaranteed to be music to your ears.
Product Features
• Proven performance gains
• 76mm (3 inch) tubing replaces restrictive 60mm factory tubing
• Bolt on fitment - no hassle or poorly fitting parts when you choose IE
• Constructed of 304 stainless piping - long-lasting and high-quality material
• Thick turbo flange - prevents leaks and warping
• High flow 200 cell catalytic converter - full power with reduced pollution and smell
• Metal matrix catalytic structure -
• OEM style flex section - allows for more adjustment and won’t fail
• All inclusive kit - downpipe, mid pipes, all hardware
• TIG welded construction - equates to long-lasting welds that are less likely to fail
• Install instructions - available by CLICKING HERE
MQB PERFORMANCE DOWNPIPE OVERVIEW
When upgrading your VW MK7 or Audi 8V A3 to stage 2 software you will also need to reduce the back pressure caused by the small diameter stock pipe. With the exhaust system flowing better performance gains be achieved. Turbo lag should also be reduced as an added benefit.
IE engineers guarantee a perfect fit by designing all IE downpipes in-house using the latest technology. Digital scanning is using to scan the entire environment which ensures that there is proper clearance and that all mounting points are in the correct location. Manufactured from 304 stainless offers a life-long product that brings performance and fun to the table for years to come.
POWER GAINS
The most power gains will be achieved when the IE Downpipe is paired with IE matching software, air intake, and FDS intercooler.
SOUND TUNING
An aggressive and drone-free sound will be emitted from the IE Cast Downpipe. This should be music to your ears! Thick wall tubing and cast sections remove much of “tinny” sound emitted by cheaper, thin wall, downpipes. With downpipes, you get what you pay for in terms of sounds and overall manufacturing quality.
HIGH-FLOW CATALYTIC CONVERTER
IE’s performance downpipe includes a high-flow 200 cell per inch metal matrix catalyst located as close to the turbo as possible. Metal matrix catalysts are higher performance because the matrix web is thinner, allowing higher flow in the same size. Our catalyst is also a very large diameter, allowing a large flow area and maximum power. By being placed close to the turbo, emissions and unwanted unpleasant smells are greatly reduced.
DIRECT BOLT-ON WITH PERFECT FITMENT
The IE downpipe replaces over 6 feet of restrictive factory exhaust tubing, all the way back to the OE “Cat-Back” rear section. Sturdy fabricated mounts and precise engineering result in a rattle free and long last replacement exhaust system. 3D scanning systems were employed to ensure perfect placement both in pre and post-production phases.
INSTALLATION
Installation should be completed by a professional and preferably on an auto lift. CLICK HERE to view and download the install guide.
*This product is not CARB certified and thus is not available for purchase in the state of California.
VEHICLE FITMENT
Audi - A3 MK3/8V 1.8T & 2.0T engines (FWD only)*
VW - GTI MK7 2.0T engine
VW - GTI MK7.5 2.0T engine
VW - Golf MK7 1.8T & 2.0T engine (FWD only)*
VW - Golf MK7.5 1.8T & 2.0T engine (FWD only)*
*This downpipe system includes a mid pipe that is specially designed to fit Gen 3 1.8T and 2.0T engines in front-wheel drive (FWD) vehicles only. All-wheel drive (AWD) Quattro, or 4 Motion vehicles require a different mid pipe section included in our AWD MQB downpipe kit IE Part Number: IEEXCI1. Please verify if your vehicle is AWD or FWD before ordering.
ADDITIONAL REQUIRED MODIFICATIONS
Installing a downpipe to your Gen 3 1.8T or 2.0T vehicle requires a matching stage 2 ECU tune to operate properly.
Regular Price:
$1,629.00
Special Price
$1,499.00
Sale
Regular Price:
$929.00
Special Price
$836.00
Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI
VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
Product Details
The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation.
Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle!
You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device.
In house designed and built in the USA, our Boost Tap includes the following:
Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap
3 Vacuum Ports with 1/4" Hose Barb Fittings
3 Vacuum Set Screws
Medium Strength Thread Lock
OEM Securing Clip
Manifold Pierce Alignment Tools
In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!
Sale
Whiteline offset strut tops allow for extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high quality spherical bearing. Perfect for the high performance street or track day weapon, providing improved tyre life and extra grip during high speed / high load cornering.
Regular Price:
$781.00
Special Price
$663.85
Description:
LEYO Cold Air Intake System guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed heat shield is also included to prevent heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.
*This product is only for use on the race track.
Specifications:
-
OEM fitment requires no fabrication.
-
3.5’inch diameter for greater air induction.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Direct bolt on & easy installation.
-
Easy installation.
Sale
Regular Price:
$769.00
Special Price
$692.00