GTI/GTD - Forge Motorsports - Integrated Engineering - VW Central - Flow Designs - Autotech

Product Description

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.

·       Stainless Steel Rivets
·       Stainless Steel Fasteners
·       Carbon fabric Outer Shell
·       Calcium Magnesium Silicate Wool constructed Inner Core
·       High temperature silica fabric

The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.

Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:

• T4
• T5
• T25
• The Garrett GTX28 and GTX30 Range
• Borg Warner EFR6258

Interior Surface:

·       Max Temperature Rating: 2300°F/1260°C
·       Continuous Use Limit: 1832°F1000°C

Exterior Surface:

·       Direct Contact Limit: 1800°F/982°C
·       Radiant Heat Limit: 2500°F/1371°C

Complimentary Products

Product Description

THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES

The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.

⭐ Excellent quality product & easy to fit ⭐

The high flow male alloy coupler is a bayonet type, rotated to the locked position before fixing in place by positioning the hose on the alloy coupler and tightening the hose clamps at both ends of the hose, anchoring the alloy coupler in position to complete the installation.

The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

As with all Forge products, this hose comes with a lifetime warranty*

Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI

MK7 Golf/GTI/Golf R 8V Audi A3/S3 MK3 Audi TT/TT-S

Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles

Buy a set of 4 Now!

Experiencing Misfires on your car? Don't go OEM again!
Upgrade your coilpacks to these sporty, redtop R8 coilpacks! Used on the Audi R8 V8 and V10, these coilpacks offer a stronger spark than factory, reducing troublesome misfire on performance upgraded and tuned VAG vehicles

Buy a set of 4 Now!

Product Details The ECS Billet Aluminum Manifold Port Boost Tap Kit conveniently adds three boost / vacuum ports to your Gen3 engine for any of your specific needs. Located on the left side of the intake manifold within the unused side intake port, this location provides a strong pneumatic signal and allows for an installation. Through multiple design revisions and product testing, our team of engineers found that other methods of acquiring a manifold signal, such as spacing the MAP / IAT sensor on top of the intake manifold, lead to skewed data being transmitted to the ECU. We found that intake air temperatures were reading lower (15-20° F at WOT), ignition timing was off (as much as -5°) and air /fuel ratio was richer (+1.0 point by 5,000 RPM). This directly translated into engine power dropping by as much as 6 WHP on an untuned vehicle! You can be certain that all critical data is not affected and your engine's ECU has all of its valuable information to properly adjust timing and fuel with our leading edge design! Engineered specifically for the Gen3 engine, we designed our Manifold Port Boost Tap with 3 ports, so you have multiple options to provide the strongest manifold signal to either your boost gauge, blow off valve, water meth switch or any other pneumatic device. In house designed and built in the USA, our Boost Tap includes the following: Black Anodized, Billet Machined 6061-T6 Aluminum Manifold Port Boost Tap 3 Vacuum Ports with 1/4" Hose Barb Fittings 3 Vacuum Set Screws Medium Strength Thread Lock OEM Securing Clip Manifold Pierce Alignment Tools In-house designed and made in America, you can expect nothing short of the best performance and longevity with this superior Manifold Port Boost Tap Kit from ECS Tuning!

Volkswagen MK7 Golf GTI Front Splitter & Aerospacers

Details:

The Flow Designs splitter set is the best exterior mod for your VW MK7 Golf GTI! With front & side splitters & rear valance, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.

By purchasing this splitter, the pre-pressed in threaded brass inserts will now accept all our add-on accessories for the MK7 GTI such as winglets and splitter extensions.

---

Kit Includes:

• Front splitter with pre-pressed in threaded brass inserts (Front Extensions and Front Winglets sold separately)
• Bumper reinforcement bracket
• Pre-mounted adjustable Aerospacers
• 2 Flow Designs stickers
• Fitting kit

CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.

Material:

• Front Splitter: 10mm thick polyethylene composite

Finish:

• Hand polished satin black
• Bevelled edges

Why do we use Polyethylene Composite for Flow Designs Splitters?

Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)

Carbon Fibre is better isn’t it?

As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.

 

Shipping Dimensions for the type of product:

Front
184x55x5 @5kg

Side
194x14x4 @5kg

Diffuser
92x25x7 @2kg

Spat
25x25x4 1kg

Winglets
25x13x11 @.5kg

DETAILS

Side winglets sold separately.

Get the original and best side skirt splitter for your MK7 Golf GTI, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and car tuners worldwide. Being the first to conceptualise, develop and manufacture the strongest front and side skirt splitters on the market, all our side splitters are backed by our 10 year warranty. Our 10mm polyethylene composite used in our side splitters are completely shatterproof and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are. 

All Flow Designs MK7 Golf GTI side skirt splitters are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your front lip splitter, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship. 

All our side splitters are precision designed to accurately suit the OEM MK7 Golf GTI side skirt. Perfect fitment is guaranteed and instructions are provided for an easy installation process (which can be completed with simple hand tools). We have pre-drilled all our parts so there is no guesswork for you, with visual prompts so you know exactly where the side splitter sits on your MK7 Golf GTI OEM side skirt.

The Volkswagen MK7 Golf GTI side splitter range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

Further customise your side skirt splitter with MK7 Golf GTI side winglets. These can be installed in our pre-pressed brass fittings already installed on the side splitter - the adjustable options allows you to match the width to the wheel setup of your Golf GTI. The complete MK7 Golf GTI Lip Splitter Kit is also available.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

---

VOLKSWAGEN MK7 GOLF GTI SIDE SKIRT SPLITTER KIT INCLUDES:

• Volkswagen MK7 Golf GTI side skirt splitters (pair)
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7 GOLF GTI SIDE SKIRT SPLITTER MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black