The Mk5/Mk6 ConsolePod™ holds two (2) 2” or 2 1/16” (52mm) gauges and mounts on underside of the center console.
Made with a low-gloss finish, the ConsolePod is uniquely designed to allow you to use the storage compartment 12V power socket and angles the gauges upward towards the driver.
The ConsolePod can be used for both LHD and RHD cars and comes with split loom tubing to cover and protect the gauge wires.
This listing is for the IE POWERlink Flash Tool only. You may also purchase this cable with IE performance tunes for your vehicle (sold separately).
POWER IN THE PALM OF YOUR HAND
Add serious power and fun to your car without popping the hood! The IE POWERlink V4 Flash Cable is the key to uploading IE engine-specific tuning upgrades to your ECU, Simply plug into your vehicles OBD2 port and launch the app on your Apple or Android phone (or Windows laptop). Enjoy serious horespower, torque gains, increased acceleraton, faster 0-60 times, optimized drivability, improved responsiveness, multiple octanes, enthusiast drive mapping and more in only minutes!
LEADING FEATURES
Uploads IE Performance Tunes (sold separately)
Apple & Android mobile flashing app (supported platforms)
Flashes engine & transmission tunes
Direct OBD2 vehicle flashing in only minutes
Customizable live gauge display (Mobile)
Octane and feature switching (varies by platform)
Upgrade tune stages for matching hardware
Return to 100% stock programming at anytime
Read and Clear diagnostic codes
Check and clear emissions monitors
Data-logging (Windows 10+ laptop)
FLASH WITH A LAPTOP
Would rather use a laptop? No problem! IE Flash Wizard Software allows the IE POWERlink Tool to communicate with your vehicle’s ECU to flash software tunes, upgrade, update, data log, or read/write codes on any Windows 10+ powered laptop or tablet.
DEVICE
PORTS
OS
PROC.
POWER
RAM
Laptop or Tablet
Wifi & USB
Windows 10 or newer
32 or 64 bit
1.0ghz or greater
4GB or greater
NOTE: Mobile flashing app requires an IE V4 POWERlink flashing cable and is not compatible with older V3 serial number units. Have a V3 and ready to go Mobile? Simply purchase a new V4 POWERlink to gain full mobile functionality.
The massive 5” velocity stack and ram-air designed IE Cold Air Intake Kit delivers the most air and horsepower possible. Quickly add horsepower, torque, and aggressive engine and turbo sound to your VW or Audi 2.0T TSI (Gen1/2) engine.
LEADING FEATURES
INCREASED HORSEPOWER & TORQUE
ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND
HIGH-FLOW BELLMOUTH
MASSIVE OVER-SIZED AIR FILTER
BLACK POWDER COAT FINISH
EASY INSTALL WITH NO MODIFICATIONS
USES FACTORY MOUNTING GROMMETS & HARDWARE
HEAT SHIELDING & DIRECTED AIR FLOW
REINFORCED SILICONE HOSES
FITS DSG AND MANUAL TRANSMISSIONS
YOUR BUILD DESERVES THE BEST
Feed your 2.0T TSI GTI, Jetta, GLI, CC, or A3 with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5" bellmouth. Our high-flow bellmouth is neatly housed in a heat shield, which separates the air filter from the hot under-hood air, allowing only cold air to be drawn into the turbo inlet directly from the front of the car.
STOCK-LIKE DIRECT FIT
This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the heat shield. The heat shield installs using the OE grommets for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.
HIGH-FLOW VELOCITY STACK
The air intake utilizes a high-flow bellmouth behind the air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the heat shield as a clean pass-through providing a solid mount for the air filter and turbo inlet pipe. You have no worry about the intake pipe moving around and causing damage unlike other intake kits on the market, which simply clamp the filter onto the end of the inlet pipe or MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design have been tested to support over 500HP!
THERMAL BLOCKING HEAT SHIELD
The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.
DO YOU NEED AN SAI KIT?
The MK5/MK6 2.0T TSI engine has two different engine codes. CBFA engine codes are equipped from the factory with a secondary air injection (SAI) pump that connects to the factory intake box. These engines require a small breather filter for this SAI line when installing an aftermarket intake. CCTA engine codes do not have this SAI pump and will not require this filter. Identify your engine code using the photos below, and add an SAI filter kit above if needed when ordering your intake.
EASY INSTALLATION
Installation is quick and easy to install with basic tools. The process should take around an hour for most enthusiasts.
SHIFT FASTER, DRIVE FASTER
The IE DSG Tune for your VW MK6 GTI, Jetta, GLI, or Audi 8J TTS 2.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 2.0T TSI into a fully rounded performance monster.
LEADING FEATURES
Lightning fast gear shifts
Higher shift points of 6800 RPM
Kick down in manual mode eliminated
Lag time reduced when starting off in first gear
Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Works flawlessly with an IE ECU tune
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
WHAT DOES A DSG TRANSMISSION TUNE DO?
The IE DSG Tune for the MK6 2.0T TSI has been carefully set up to make the car way more fun to drive. It completely reworks the shift point mapping in both drive and sport. The transmission will no longer lug the engine in drive mode. Clutch clamping forces are increased so the transmission can safely handle much more power. Shifts are much, much faster taking time directly off the 0-60 and ¼ mile times.
ONE TUNE FOR ALL STAGES
IE’s TCU/DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset. A great deal of sportiness is added from the tune while maintaining factory smoothness and driveability. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve from faster shifting. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
USER ADJUSTABLE LAUNCH CONTROL
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
Available Launch Control RPMs:
3200 RPM
3400 RPM
3600 RPM
3800 RPM
4000 RPM
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your 2.0 TSI engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The MK6 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
MULTIPLE LAUNCH RPMS
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE
The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI engine and transmission.
VEHICLE FITMENT
VW - MK6 GTI 2010-2014 (MK6) 2.0T EA888 Gen1/2 TSI engines
VW - MK6 Jetta 2011-2013.5 (MK6) 2.0T EA888 Gen1/2 TSI engines*
VW - MK6 GLI 2011-2013.5 (MK6) 2.0T EA888 Gen 1/2 TSI engines*
AUDI - TTS 2008-2015 (8J) 2.0T TFSI EA113 engines
*This DSG calibration is for 2.0T TSI EA888 Gen 1 & 2 engines only. Many Jetta and GLI models are equipped with a new engine variation (EA888 Gen 3) after 2013.5 and later. This tune does NOT support Gen 3 model engine TCUs. Please verify if your engine is an EA888 Gen 1/2 2.0T TSI or EA888 Gen 3 2.0T TSI tune before ordering.
IE DSG tunes are available only for vehicles equipped with 6 speed DSG (DQ250) transmissions. Does not function with manual 6-speed transmission cars.
Bronze inner bushing to provide smooth pivoting without wear
PRODUCT DETAILS
Say goodbye to mis-shifts and eliminate unnecessary play in your shifter with IE billet shift cable end bushings!
Eliminate unnecessary play in your shifter with these billet shift cable end bushings. These two piece bushings are CNC machined in-house from 6061 aircraft aluminum with a special bronze inner bushing. They directly replace the rubber factory cable bushings that deteriorate over time causing excessive play in the shifter. When the factory bushings are worn out, shifts become less precise, causing you to miss shifts. Not only will you be missing shifts but, by not fully engaging gears in the transmission, you can even strip the teeth right off the gears. Includes a total of four bushings.
FITMENT
VW - Golf R 2012-2012 (MK6) 6 speed transmisison
VW - GTI 2009 (MK5) 6 speed transmisison
VW - GTI 2010-2014 (MK6) 6 speed transmisison
VW - Rabbit 2008-2009 (MK5) 5 speed transmisison
VW - Jetta 2008-2009 (MK5) 5 speed transmisison
VW - Jetta GLI 2008-2009 (MK5) 6 speed transmisison
VW - Jetta GLI 2010-2014 (MK6) 6 speed transmisison
VW - Jetta GLI 2014-2016 (MK6.5) 6 speed transmisison
V3 2019 Release
P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio.
All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration.
Features:
Boost and Vacuum from OBD2 port
Plug and Play install – just plug into your obd2 port and install into dash!
Optional analog sensor for reading boost on tuned/big turbo cars.
OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more!
Optional Auto-Dim or Manual Dimmer
Code Read/Clear
2 x universal 0-5v linear analog inputs
Includes Digital Display, Custom OBD Wire Harness, Control Box.
Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included.
Applicable Models:
Right Hand Drive MK6 Golf GTI
Details:
Complete the aero stying of your VW MK6 Golf GTI with the rear valance and Flow-Lock diffuser fins from Flow Designs. Each item is precision made & hand polished - popular with many Volkswagen enthusiasts as our splitters are known for being impact resistant & extremely strong.
Kit Includes:
Rear valance (pair)
Flow-Lock diffuser fins x6
2 Flow Designs stickers
Fitting kit
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
Material:
Valance: 10mm thick polyethylene composite, bevelled edges
Flow-Lock Diffuser Fins: 4.5mm thick textured ABS
Finish:
Valance: Hand polished satin black
Flow-Lock Diffuser Fins: Scratch resistant textured ABS plastic
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Use of ABS Plastic
Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.
Please note you are receiving a special price when you purchase the MK6 R complete splitter set.
The Flow Designs splitter set is the best exterior mod for your VW MK6 Golf R! With front & side splitters & rear valance with Flow-Lock diffuser fins, Flow Designs offer the strongest splitters on the market. Easy install & perfect fitment guaranteed, with Australia-wide & international shipping on all products.
All our splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market, watch our stress test to see how durable our splitters are. Each splitter is model specific in its development and design to ensure perfect fitment. The entire production process is done is our Bayswater factory making us proudly Australian made and owned. We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!
We also have packages that include our MK6 R bolt on accessories range.
MK6 GOLF R LIP SPLITTER KIT INCLUDES:
MK6R V3 front splitter & Aerospacers
MK6R V3 side Splitters (Pair)
MK6R Flow-Lock Rear Diffuser
MK6R V3 rear spats (Pair)
2 Flow Designs stickers
Fitting kit
ADD:Rear Window Vents, Spoiler Extension &/or Fire Extinguisher Bracket/Mount if desired
MK6 GOLF R LIP SPLITTER KIT MATERIAL & FINISH:
Front splitter, side splitters, diffuser, rear spats: 10mm thick polyethylene composite, bevelled edges
Hand polished satin black
Flow-Lock fins and rear valance: scratch resistant textured ABS plastic
CNC engraved logo and features, hand polish and packed all in Melbourne's outer east.
Window Vents: 4.5mm scratch resistant textured ABS plastic, CNC engraved logo and features
Rear Spoiler Extension: 4.5mm scratch-resistant reversible textured (Top) with hi-gloss acrylic underside, CNC engraved logo and features
Fire Extinguisher Bracket/Mount: 3mm Stainless Steel, Powder-coated Texture Black
HOW STRONG ARE OUR SPLITTERS?
FAQ
HOW IS YOUR SPLITTER SO STRONG?
Each splitter is developed to become an integral part of your stock body kit, giving it unrivalled rigidity and strength so it can absorb scrapes and protect your bumper.
WHY DO YOU USE POLYETHYLENE COMPOSITE FOR YOUR PRODUCTS?
Strong, impact-resistant, doesn't corrode or chip, and has excellent abrasion resistance (eg. scraping on driveways!)
WHAT ABOUT CARBON FIBRE?
As strong and light as carbon fibre is, it cracks on impact or when under load and/or stress. Clearcoat will eventually fade or crack, becoming undesirable.
USE OF ABS PLASTIC
Please note that although all our precision-made ABS accessories are extremely strong and durable, they do not hold the same shatterproof label as our 10mm thick polyethylene composite splitters. The accessories are manufactured in ABS with the intention that they will be lighter, bolt-on attachments that will improve aesthetics and are easily replaceable if they become damaged from varying road conditions.