MK7.5 GTI (2017+) - CTS Turbo - Turbosmart - Integrated Engineering - Vogtland - Eibach - Whiteline
CTS Turbo is proud to release our 187mm Dual Pulley Upgrade Kit for Supercharged 3.0T V6 engines (press-on style).
The smaller diameter supercharger pulley and larger diameter crank pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not drastically increase stress or excessive wear on supercharger or engine components.
This kit features press-on style supercharger pulley. Check on your vehicle before ordering!
NOTE: This kit must be used with appropriate “Stage 2+” or equivalent performance software. Please contact your tuner. Use of upgraded heat exchanger is highly recommended.
Kit Includes:
1 x CTS Turbo Supercharger Pulley, Press-on, 57.3mm
1 x CTS Turbo Crank Pulley, 187mm
8 x Grade 12.9 bolts
1 x Bando Serpentine Belt (Made in the USA)
Fitment (check on vehicle):
- S4 B8/B8.5 (2010-2016)
- S5 B8/B8.5 (2010-2016)
- SQ5 B8 (2014+)
- Q5 B8 (2009+)
- A6 C6 (2005.5 – 2011)
- A6 C7 (2012+)
- A7 C7 (2012+)
Sale
IE’s cold air intake has been obsessively engineered for performance first using professional motorsport practices and computational flow dynamic software. The result is a uncompromising intake system that sounds and performs for the street or track with a sophisticated and sporty design.
EASY INSTALL
BOLT-ON DESIGN
NO MODIFICATIONS
ADDS HORSEPOWER
UP TO +21HP
ON TUNED ENGINES
FLOW OPTIMIZED
VELOCITY STACK
MOTORSPORT DESIGN
Introduce a jump in power to your 3.0T supercharged engine in under an hour with peak gains of 15-20+HP/TQ on tuned engines.
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE’s intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds FANTASIC too!
The multi-piece heat shield not only looks great, but it built to perform by effectively channeling cold air from the front of the car to the massive air filter. The location, shapes, and angles of the heatshield are no accident, these are all designed to protect the intake from hot air surrounding the engine bay.
This Intake fits Audi C7 A6 & A7 3.0T V6 Supercharged engines without any modifications or hassles. The install process is simple and can be done quickly with basic tools. IE intakes utilize the factory airbox mounts ensures a perfect and long-life fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
Regular Price:
$702.00
Special Price
$689.00
CTS Turbo is excited to announce the release of the B9 Audi S4/S5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe.
Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi S4/S5. You’ll notice an increase in throttle response and a decrease in turbo lag.
Two water/methanol bungs provide an easy way to install injection nozzles.
Product Details
- 2.5″ mandrel-bent aluminum piping
- Billet throttle body inlet adapter
- Precision CNC machined MAP sensor flange
- Robust Black Powdercoated Finish
- 4 ply silicon connector
- Stainless Steel Clamps
- 2 x 1/8″ NPT Water-Methanol Bungs with plugs
- Compatible with factory and CTS Turbo intercoolers (may be compatible with other aftermarket intercoolers)
Fitment
- 2018 – current B9/B9.5 Audi S4 3.0T Turbo
- 2018 – current B9/B9.5 Audi S5 3.0T Turbo
Description
The IE Carbon Fiber Intake System for your Audi C8 RS6 or RS7 has been engineered for performance first through extensive airflow analysis and design testing. Get ready to experience massive real-world power and torque with 60-70HP gains on tuned engines! Elevate your driving experience by releasing the unique turbo and engine sound, bringing your twin-turbocharged V8 powerhouse to life!
Description
The IE MQB HPFP upgrade kit unlocks fuel delivery for ethanol, larger turbos, and our TrueFlex ECU tunes for the VW & Audi MK7 & 8V 2.0T Gen 3 engines. The piston and cylinder assembly is the largest volume possible within the stock fuel pump body. Top-quality components and our strict QC process ensure extreme reliability. Increase your fueling overhead and enjoy worry-free HPFP operation for your MQB 2.0L turbocharged engine.
- Highest flowing MQB HPFP upgrade on the market
- HPFP upgrade for ethanol & larger turbo tunes
- Fueling support for IE TrueFlex & ethanol tunes
- Reliably adds a larger fuel ceiling for increased flow
- The piston diameter increased from 9.92mm to 11.68mm
- Stroke volume increased from 231mm^3 to 321mm^3
- Broken-in and bench tested on in-house pump dyno
- Constant diameter piston design for long-life operation
- Tool steel DLC coated pin
- Nitrided tool steel cylinder
- Molybdenum disulphide impregnated leak-free seal
- Stainless steel seal body
- Buna-N rubber oil resistant o ring
- Engineered, designed, & manufactured in the USA
Your HPFP is an integral part of the MQB platform direct injection (DI) system and provides exceptionally high-pressure fuel (exceeding 2900psi) to the injectors. When running turbo upgrades or ethanol fuel, the stock HPFP internal volume becomes the limiting factor when increasing power. IE’s HPFP internals install into your factory pump housing and increase the bore and piston size of the pump internals, allowing more flow, delivering more fuel, and allowing for more horsepower & torque.
Upgrading to IE’s HPFP reliably increases the flow rate of the high-pressure pump for more tuning headroom to increase power safely. The result is a maximum gain of 38.58% over stock!
Every piston and cylinder is CNC machined to exacting sizes, assembled, and measured as a matching set in-house. Tolerances are hand-verified using specialized measurement tools and verified down to 0.00005 of an inch to ensure reliability and proper function. These extreme manufacturing and QC processes are the foundation that has built IE’s leading reputation in HPFP reliability and the popular choice for anyone wanting worry-free operation.
Engineered & manufactured in the USA
IE HPFP designs are verified and torture-tested on our own application-specific fuel pump dyno. This machine is able to replicate countless miles and various RPM situations to substantiate every detail of the HPFP design. This strict engineering process, combined with our 100% in-house CNC machining, obsessed quality control, and top-shelf components is why IE HPFP Kits have earned their esteem and reputation for reliability.
INCLUDED LIMITED WARRANTY
Due to the extreme machining and coating tolerances, Integrated Engineering offers a limited warranty on this product:
Six months from the day of purchase (unlimited miles) for MQB internal HPFP kits.
DLC (diamond-like carbon coating) is an advanced coating process applied to the tool steel pin. This coating combines hardness and low friction, providing excellent wear properties and self-lubrication behavior that drastically extends pin life.
Many aftermarket HPFP options use a stepped-diameter piston in a cost-saving effort to reuse the factory seal. This design dramatically reduces the contact between the pin and cylinder, causing instability of the pin stroke leading to increased wear. IE’s uniquely designed constant diameter pinmaintains its larger size through the entire piston shaft. This engineering detail increases the contact between the pin and cylinder by over 50% compared to kits which do not replace the seal and nut, increasing pin stability.
The cylinder can see up to 19000 strokes a minute with an astonishingly thin tolerance and is lubricated by fuel only. Our tool steel cylinder is nitrided to guarantee it can withstand this torture. This advanced process infuses nitrogen atoms into the atomic structure of the outer surface of the component, increasing surface hardness and wear properties drastically. The thickness and quality of every nitride production batch are independently verified in a specialty lab.
Our ultra-lightweight FEA optimized titanium retainer reduces the chance of valve float while securing the spring to the new IE pump assembly. The internal kit is designed correctly for the factory spring rate, avoiding the need for a stiffer spring that adds unnecessary pressure and wear on the camshaft.
A custom CNC Machined nut holds our molybdenum disulphide impregnated PTFE seal, which is ideal for reducing friction and maintaining stiffness. The seal is spring energized to increase reliability and provide constant outward pressure. The body is sealed to the pump with a quality Buna-N rubber o ring, ensuring it will hold up against heat and a wide range of fuels. What may seem like minor features add up to ensure long life and trouble-free operation.
CTS Turbo is proud to offer the premier catch can solution for the MK7 Golf R & 8V S3. The oil catch can is used to prevent oil vapors entering the intake manifold and clogging up the intake valves on direct-injection motors. Oil deposits on intake manifold and valves reduce performance and cause bad fuel mileage. Keep your engine clean, running smoothly, and enjoy the peace of mind that comes with knowing that the PCV system on your car is now free of issues.
DESCRIPTION
We are proud to release the new CTS Turbo Stainless Steel 3″ downpipe with high-flow catalytic converter for the MK6/MK7 Jetta 1.4TSI and MK7 MQB Golf 1.4TSI with EA211 Gen1 and Gen2 engines.
Unfortunately, the factory downpipe that comes as standard equipment in your car was designed for anything but performance. The factory downpipe severely restricts exhaust flow and therefor has adverse effects on horsepower, especially once your car is “chipped”. The CTS Turbo downpipe will allow for your exhaust gases to flow smoothly, freeing up the additional ponies that you want, all while look amazing. Highlights of our downpipe include CNC machined turbine discharge (downpipe) flange, mandrel-bent stainless steel tubing, modular design making installation simple and straight forward, smooth transitions allowing for optimal exhaust gas flow.
Precision fabrication, unparalleled quality and great price point all make the downpipe a must-have for any VW enthusiast that values performance and their pocketbook.
Fitment:
- 2015 – 2021 VW Jetta SE 1.4T TSI EA211
- 2016 – 2021 VW Golf 1.4T TSI (MQB) EA211
NOT COMPATIBLE WITH TWIN-CHARGED or HYBRID ENGINES
Product Details:
- Fitment for multiple models, modular design
- Compatible with factory and aftermarket exhaust
- 200cell metallic race catalytic converter
- T304 Seamless Stainless Steel tubing
- T304 Stainless Steel flanges
- 100% TIG Welded
- T304 Stainless Steel 02 bungs with plugs
- Stainless Steel Clamps
- Great Sound without any drone. Sounds great even with factory exhaust.
Stage 2 software is required to avoid check engine light.