You have no items in your shopping cart.

Product was successfully added to your shopping cart.

MK7 Golf R (2014+)

Set Ascending Direction

   

Items 21 to 30 of 43 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. CTS TURBO STAGE 3 FUEL PUMP UPGRADE KIT FOR VW/AUDI MQB MODELS

    DESCRIPTION

    We are proud to release the new our CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, MK7 Golf R, and B9 A4/A5.  As you may already know the TFSI fueling system has two separate fuel pumps, the LPFP (Low-Pressure Fuel Pump) and HPFP (High-Pressure Fuel Pump).  While there are a number of options for HPFP available, including the Autotech HPFP, there are limited options for fortifying the low-pressure fuel system.  CTS has developed a fully integrated fueling system, which utilizes a Walbro 450LPH E85 compatible in-tank fuel pump that is capable of supporting in excess of 500HP.  If you’re looking for a fuel pump system to support all the power that your engine can handle look no further than the CTS Turbo Stage 3 Fuel Pump Kit for MQB GTI, Golf R, 8V Audi A3/S3 and MQL B9 A4/A5.

    NB: please keep in mind that some modifications to your fuel pump basket is required. Some baskets differ from each other so installation should be performed by an experienced technician.

    Torqbyte Controller is an optional add-on and strongly recommended when using E85 fuel and tuning.

    Product Details:

    – Genuine Walbro High Output in-tank 450LPH E85 compatible Fuel Pump
    – Genuine Walbro Filter sock (may not fit all revision fuel pump baskets)
    – CTS CNC machined/black hard anodized pump adapter
    – CTS CNC machined/black fuel pump spacers
    – CTS CNC machined/black fuel pump venturi standoff
    – Viton O-ring
    – Nylon wire crimps
    – Drill bits
    – Stainless steel fasteners

    Fitment:

    • 2015 – current VW Golf (incl Sportwagen and AllTrack)
    • 2015 – current VW GTI (incl Rabbit)
    • 2015 – current VW Golf R
    • 2015 – current Audi A3
    • 2015 – current Audi S3
    • 2017 – current Audi A4/A5/AllRoad
    $629.00
  2. IE Valve Spring & Retainer Kit For 2.0T FSI & TSI (Gen 1, 2, 3) | Fits VW MK5, MK6, MK7 & Audi B7, B8, 8P, 8J, 8V, 8S, C7 IE Valve Spring & Retainer Kit For 2.0T FSI & TSI (Gen 1, 2, 3) | Fits VW MK5, MK6, MK7 & Audi B7, B8, 8P, 8J, 8V, 8S, C7
    Sale

    IE Valve Spring & Retainer Kit For 2.0T FSI & TSI (Gen 1, 2, 3) | Fits VW MK5, MK6, MK7 & Audi B7, B8, 8P, 8J, 8V, 8S, C7

    IE ULTIMATE PERFORMANCE VALVE SPRING & RETAINER KIT FOR 2.0T TSI

    This high-quality IE Valve Spring & Titanium Retainer kit features spring rates optimized to match your 2.0T FSI/TSI specifications and provide proper valve control preventing valve float in high-power and high-revving applications.

    LEADING FEATURES

    • Protects against engine failure from valve float
    • Safely increase your rev limit and power band
    • Nan-peened valve springs provide long life
    • In-house CNC machined retainers from titanium
    • Optimized design for all EA113/EA888 2.0T engines
    • Highest quality spring material available in the world
    • Torture tested in-house for high-power reliability

    INCLUDED IN KIT

    • 16 PRECISION WOUND INTAKE/EXHAUST VALVE SPRINGS
    • 8 EXACT TOLERANCE TITANIUM INTAKE RETAINERS
    • 8 EXACT TOLERANCE TITANIUM EXHAUST RETAINERS

    WHY DO I NEED A SPRING & RETAINER KIT?

    Increasing your engine's power output often comes with modifications that require more RPMs to get the most out of it, such as larger turbochargers, tuned intake manifolds, and high-output software tunes. Upgrading those components without changing out the valve springs can leave you with a short power band or cause valve float and other significant damage.

    ONLY TRUST YOUR ENGINE TO THE BEST

    Other cheap valve spring kits are often designed by simply finding a spring that is stiffer and will fit. Those are also not usually a good compromise because many times they are the wrong stiffness, and often poorly constructed. A broken valve spring can cause total engine failure and destroy everything that you have put hard work and money into. Our kits are the only spring and retainer kits on the market designed by someone with a working knowledge of the unique valvetrain in the VW & Audi EA113 FSI engines, and what the spring requirements actually are.

    THE ULTIMATE SPRING & RETAINER KIT

     Manufactured out of the best spring wire in the world IE valve springs use a patented multi-stage shot peening process that further reduces failure rates. Our titanium retainers are machined with an excellent surface finish and tight tolerance control for a long lifespan. Each application is thoroughly tested to perform on these engines right here in our test facility in Salt Lake City, Utah. Our spring and retainer kits are the best matched, most tested parts on the market. Purchasing a set will ensure that your engine runs at maximum performance and reliability.

    Regular Price: $1,015.00

    Special Price $985.00

  3. IPE - Volkswagen Golf R (Mk7) Catback Exhaust System

    DESCRIPTION

    1.Improper adjustments made during installation may result in short-term to permanent damages to the iPE exhaust system and/or your vehicle.

    iPE will not be held responsible for any damages to the vehicle, and warranties on our products will be voided if the damages occurred due to improper installation.If you have any trouble installing the system please contact your authorized dealer!



    2. The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the iPE exhaust system. When installing the iPE exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature.



    3. iPE makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the iPE exhaust system. The warranty is limited to defects recognized by our technical department and of normal use only, and excludes items subject to normal wear and tear(gaskets and damping wool). The warranty is voided in case of accidents, modifications, improper or competition uses.



    *Actual product may vary due to product enhancement. iPE reserves the right to revise, change, explain the product.

    *Cat Pipe/Cat-bypass Pipe ONLY fit with iPE Catback System

  4. CTS TURBO MK7 GOLF R / 8V S3 CATCH CAN KIT

    CTS Turbo is proud to offer the premier catch can solution for the MK7 Golf R & 8V S3.  The oil catch can is used to prevent oil vapors entering the intake manifold and clogging up the intake valves on direct-injection motors.  Oil deposits on intake manifold and valves reduce performance and cause bad fuel mileage.  Keep your engine clean, running smoothly, and enjoy the peace of mind that comes with knowing that the PCV system on your car is now free of issues.

    $899.00
  5. Whiteline Performance Front Strut Mount - Kit Whiteline Performance Front Strut Mount - Kit
    Sale

    Whiteline Performance Front Strut Mount - Kit

    Whiteline offset strut tops allow for extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high quality spherical bearing. Perfect for the high performance street or track day weapon, providing improved tyre life and extra grip during high speed / high load cornering.

    Regular Price: $781.00

    Special Price $663.85

  6. H&R Lowering Springs - VW MK7 & MK7.5 Golf VII R Lowers F/R 25mm

    H&R Lowering Springs - VW MK7 & MK7.5 Golf VII R
    $605.00
  7. P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release  – MK7 / MK7.5 Golf R - (2014-2019) P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release  – MK7 / MK7.5 Golf R - (2014-2019)
    Sale

    P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – MK7 / MK7.5 Golf R - (2014-2019)

    P3 Cars - V3 2019 Release NEW FEATURES • New control box and updated screen bargraph • Updated harness with streamlined connectors • New improved color coded obd2 harness • Read D.T.C's on command • Remove unwanted PIDs / gauge modes • Configure units individually for English/Metric • Calibrate vehicle speed reading • Read AFR in Lambda (vehicles with wideband) • Auto-detect available PIDs / sensors • Pre-configured analog inputs for P3 Sensors

    Regular Price: $594.00

    Special Price $534.60

  8. IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release
    Sale

    IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release

    When you begin modifying your VW MK7/Audi MK3 Golf R, GTI, A3, or S3 it will become necessary to upgrade the intercooler. Once upgrades such as ECU tuning, exhaust systems, and turbo upgrades are introduced, intake air temperatures begin to rise, resulting in massive power loss.

    Regular Price: $1,899.00

    Special Price $1,729.00

  9. Genuine VW MK7.5 Facelifted Dynamic LED Tail Lights for MK7 & MK7.5 Golf Hatchback

    Genuine VW 2018 LED Facelifted Tail lights Give your MK7 the ultimate look and style. This sleek, modern and elegant tail lights will be sure to turn some heads. Standout from the crowd with the beautiful new LED glow which can be seen on the MK7.5 platform. These OEM tail lights, are built with the highest quality material in German Engineering. These tail lights will fit your halogen, or non-facelifted LED tail lights and give your vehicle a new MK7.5 Dynamic LED look. This kit does require a harness that can be purchased from the link below in order to operate. VCDS coding is also required. Installation is approximately 35-40 minutes using our retrofit adapter harness. Golf MK7 Owners: Please ensure you purchase the correct harness for your vehicle: Golf MK7 - Golf MK7.5 Dynamic LED Tail Light Retrofit Adapter Harness for RHD
    $899.00
  10. VW Golf MK7 R - iPE Valvetronic Catback Exhaust System

    iPE Innotech revolutionizes the Hot-Hatch-Segment with an exhaust system completely made from stainless steel, for the new VW Golf R MK7.

    This extremely durable, performance increasing and valve-controlled system brings your new Golf R more than only an exclusive touch.

    Our premium-class exhaust system has larger pipes in diameter and an optimized exhaust flow, leading to more performance and improved torque and response.

    The system comes standard with chrome silver tips. Different colour tips are available from the drop-down menu.

    Please note if you have an MK7.5 Golf R - The link pipe to the muffler is different to the MK7 Golf R. 

Set Ascending Direction

   

Items 21 to 30 of 43 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5