Search results for 'gt'

DESCRIPTION

CTS Turbo is proud to announce our new Vent to Atmosphere Adapters for Mercedes-Benz M177 W213/W222/X290 E63/E63S/S63/G63/AMG GT63/AMG GT63S.

These are a bolt-on solution to achieve that blow-off valve sound, but without being too loud.

There will be no CEL since the OEM Diverter Valve is still being used and no tuning is required.

Features:

• Precision machined aluminum
• Black anodized
• Quick installation.
• NO Check engine light

Fitment:

• 2017-2021 Mercedes-Benz E63/E63S (W213)
• 2018-2021 Mercedes-Benz S63 (W222/C217)
• 2019-2020 G63 AMG (W463)
• 2019-2020 AMG GT 63/AMG GT 63S (X290)

Model

Generation

At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow. 

The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system.  Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing.  Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.

Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.

Product Details:

• Mandrel bent large bore 3.5" aluminum piping with black powder coating
• Coveted Laser etched //CTS Turbo logo
• 3.5" Reusable air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Sealed air box
• Bracketry to prevent rattling under engine torquing
• Billet SAI breather adapter and filter (Optional in drop down menu)

• 2014+ VW Golf (all models)
• 2014+ VW GTI 
• 2014+ VW Golf R
• 2018+ Audi A3 (all models)
• 2018+ Audi S3

 NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.

CONFIRM ON YOUR CAR BEFORE ORDERING!

CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles.  The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow.  Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance.

The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!!

The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine!

Features:

• Designed to fit factory airbox and any turbo inlet pipe
• 5-ply silicone construction
• Smooth interior
• High strength hose clamps

Components:
1 x CTS Turbo MQB Turbo Inlet Hose
2 x Hose clamps

Fits the following vehicles:

• MK7 VW GTI
• MK7 VW Golf R
• MK7 Audi A3
• MK7 Audi S3

Description

CTS Turbo is proud to release our 2.0T DV (DIVERTER VALVE) KIT for EA888.3 equipped vehicles.  The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) is made of billet construction and completely serviceable.  Our kit is designed to work with all of the factory electronics, will not cause any check engine lights and is plug and play with no wiring extensions required.  The CTS Turbo 2.0T DV (DIVERTER VALVE) KIT (EA888.3) replaces the factory plastic unit which has been prone to failure from torn diaphragms, cracked plastic, and electrical malfunctions.  Our piston design ensures long life, easy installation, complete serviceability, great sound and great value.  This valve is quite compact being slightly shorter than the stock unit and fits nicely even in the tight engine bays of today’s VAG cars.

Fitment:

B9 Audi A4/A5/Allroad/Q5 (EA888 Gen 3)
MK7 Golf R (EA888 Gen 3)
MK7 Golf GTI (EA888 Gen 3)
MK7 Golf 1.8 TSI (EA888 Gen 3)
MKIII Audi S3 (EA888 Gen 3)
MKIII Audi A3 (EA888 Gen 3)
MK2 Audi TT (EA888 Gen 3)
Skoda Octavia VRS (EA888 Gen 3)
MKVI Jetta (EA888 Gen 3)
MKII Beetle (EA888 Gen 3)
Passat B7 (EA888 Gen 3)

Product Features:
T6061 billet aluminum construction
Black anodized stealth finish
Fully compatible with OE electronics
Fully serviceable piston design
No additional wiring required
Substantial reliability improvement over OE
Additional red spring is for high boost applications 2bar+
Compact design fits into tight spots easily

At CTS Turbo we are proud to announce our new 3″ air intake system for the 1.8TSI and 2.0T Gen1 and Gen3 VW/Audi range of vehicles. This kit includes parts that make it compatible with both generations of TSI engines!

The air scoop works in conjunction with our sealed airbox to seamlessly force cold air into our 3″ air intake system.  Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing.  Our 3″ CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 9-15WHP. By using a factory MAF housing (when equipped), you can be sure that fuel trims will remain perfect.

All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.

This intake kit is designed to be compatible with our TSI Gen1 BOSS kits; intake pipe features 2x 1/8NPT bungs for easy installation of BOSS kits.

Product Details:

• Full 3″ Mandrel-bent aluminum piping with black powder coating
• Compatible with CTS BOSS kits, with provisions for easy installation
• Reusable air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Airbox with rubberized trim
• Bracketry to prevent rattling under engine torquing
• Gains ranging from 9-15WHP on a stock vehicle, even more, if tuned!
• No CEL, no fuel trim issues

GEN1 Fitment (EA888.1)

• MK5 GTI with TSI motor (2009)
• MK5 Jetta with TSI motor (2009-2010)
• MK6 GTI (2010-2013)
• MK6 Jetta GLI (2012-2013)
• EOS with TSI motor (2009-2016)
• Passat CC TSI (2009-2013)
• New Beetle TSI (2010-2013)
• Scirocco TSI (2008-2017)
• Audi A3 TSI (2009-2013)

GEN3 Fitment (EA888.3 non-MQB)

• Volkswagen Beetle (MK2)
• Volkswagen Jetta (MK6) 18TSI & GLI (2013.5-2018)
• Volkswagen Scirocco (MK3)
• Volkswagen Passat 1.8TSI & 2.0TSI (B7)

At CTS Turbo we are proud to announce our new air intake system for the transverse 2.0T FSI EA113 VW/Audi range of vehicles.

The air scoop works in conjunction with our sealed airbox to seamlessly force cold air into our 2.75″ air intake system.  Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing.  Our CNC mandrel-bent aluminum intake pipe allows for smooth entry of cold air into the engine providing peak power gains ranging from 9-15WHP. By using a factory MAF position, you can be sure that fuel trims will remain perfect.

All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound.

This intake kit is designed to be compatible with our FSI EA113 BOSS kits; intake pipe features 2x 1/8″ bungs and 1x 1/2″ bung for easy installation of BOSS kits. Plugs are included.

Product Details:

• Full 2.75″ Mandrel-bent aluminum piping with black powder coating
• Compatible with CTS BOSS kits, with provisions for easy installation
• Reusable 3″ air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Air box with rubberized trim
• Bracketry to prevent rattling under engine torquing
• Gains ranging from 9-15WHP on stock vehicle, even more if tuned!
• No CEL, no fuel trim issues

Fitment:

• MK5 VW GTI incl. Edition 35 (2006-2008)
• MK5 VW GLI (2006-2008)
• MK5 VW EOS (2006-2008)
• MK6 VW Golf R (2012-2013)
• MK2 SEAT Leon (2006-2009)
• MK2 SEAT Cupra R (2006-2012)
• B6 VW Passat (2006-2010)
• 8P Audi S3 (2006-2013)

CTS Turbo is proud to release our B-Cool Billet Oil Filter Housing.  The OE plastic filter housing is quite fragile and is know to become brittle and crack over time.  Each CTS Turbo B-Cool Billet Oil Filter Housing is constructed in house from T6061 Aluminum.  Not only does the B-Cool filter look good, but it works great.  We have engineered cooling fins into our design to act as a heatsink, which dissipates heat from the engine oil.

Installation is very straight forward and only required basic hand tools:

Drain oil from filter housing, use a 36mm socket to remove the factory oil filter housing, install new filter, install new filter housing o-ring to CTS housing, reinstall on the car and tighted to 18 ft/lbs, refill engine oil.

Product Details:

•   Made in Canada from billet T6061 Aluminum
•   Hard anodized black for stealth and longevity (machined finish shown)
•   Uses OEM O-ring
•   Installation of CTS-HW-0242 requires removal of center cage from OE housing cap, which snaps into the CTS billet housing
•   OE-style threads are precision made to fit just like factory part. Other manufacturers do NOT make this thread.
•   Compatible with OEM Filter

The CTS B-Cool Billet fits Audi, VW, Seat, Skoda models with EA113 2.0T FSI engines, 2.5L 5-cylinder engines and 2.5T 5-cylinder turbo engines.

This part replaces the OE part# 06D 115 408B and 07K 115 408.

Fitment:

• MK6 Golf R, MK5 GTI (FSI), 8P Audi A3 (FSI), MK2 Audi TT-S (FSI)
• MK5 and MK6 Golf, Jetta 2.5 5-cylinder
• 8P Audi RS3 (not for facelift model)
• MK2 Audi TT-RS (not for facelift models)

CTS Turbo Blankets isolate the heat produced by your IHI IS12/IS20/IS38 turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.  In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.

This turbo blanket fits all IHI turbos found on MQB platform cars

IS12 Turbos found on MK7 1.8TSI Golf and 8V Audi A3 FWD

IS20 Turbos found on MK7 GTI and 8V Audi A3 Quattro

IS38 Turbos found on the MK7 Golf R and 8V Audi S3

CTS Turbo Blanket Heat Tolerance:

Interior Surface:
Max Temperature Rating: 2100 Deg F
Continuous Use Limit: 1800 Deg F

Exterior Surface:
Direct Contact Limit: 800 Deg F
Radiant Heat Limit: 1200 Deg F