Genuine VW 2018 LED Facelifted Tail lights Give your MK7 the ultimate look and style. This sleek, modern and elegant tail lights will be sure to turn some heads. Standout from the crowd with the beautiful new LED glow which can be seen on the MK7.5 platform. These OEM tail lights, are built with the highest quality material in German Engineering. These tail lights will fit your halogen, or non-facelifted LED tail lights and give your vehicle a new MK7.5 Dynamic LED look. This kit does require a harness that can be purchased from the link below in order to operate. VCDS coding is also required. Installation is approximately 35-40 minutes using our retrofit adapter harness. Golf MK7 Owners: Please ensure you purchase the correct harness for your vehicle: Golf MK7 - Golf MK7.5 Dynamic LED Tail Light Retrofit Adapter Harness for RHD

Plug N Play – New Update V2.0 – Brighter

Get a unique sweeping / dynamic / sequential LED appearance by simply upgrading the LED module on your Golf Mk7 with our dynamic variant.
Made specifically for MK7, incorporating the same socket as OEM for easy install, no further coding or modification needed.

• Plug N Play – no coding needed
• Easy 10 min install
• No coding needed
• All Tools Included

Fits

• All VW Golf MK7.0 models 2014-2017 TSI / TDI / GTI / R
• Does not fit VW Golf Mk6
• Does not fit VW Golf MK7.5 Models

What's Included

2pcs – Sequential Mirror LED modules MK7
1pcs – Torx Tool

1pcs – Trim Removal Tool

Product Description

• Direct OEM replacement
• Made from the highest quality Aircraft quality T6061 billet aluminium construction
• Fully compatible with OEM electronics
• Fully serviceable piston
• Capable to 600HP (with uprated spring kit)
• Utilising world leading springs for more precise operation and consistency
• All internal and external components have been made in the UK
• Pistons use heat stabilised Viton O-rings
• Lubricated with high temperature Mobil1 grease
• Fully serviceable and rebuildable in minutes
• Unlike other valves on the market, ours produce no check engine lights (EML)
• Improved dynamic throttle response
• Consistent turbo boost & reduced turbo lag
• Covered by the Forge Lifetime Warranty*

Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered

This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!

Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.

Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!

This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐

⭐  Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐

⭐  Easy installation and sounds fantastic! Money well spent ⭐

In The Box:
1 x FMDVMK7A Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker

 

At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow. 

The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system.  Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing.  Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.

Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.

Product Details:

• Mandrel bent large bore 3.5" aluminum piping with black powder coating
• Coveted Laser etched //CTS Turbo logo
• 3.5" Reusable air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Sealed air box
• Bracketry to prevent rattling under engine torquing
• Billet SAI breather adapter and filter (Optional in drop down menu)

• 2014+ VW Golf (all models)
• 2014+ VW GTI 
• 2014+ VW Golf R
• 2018+ Audi A3 (all models)
• 2018+ Audi S3

 NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.

CONFIRM ON YOUR CAR BEFORE ORDERING!

**Comes with tubular crash bar to fit Australian spec cars**

 • 76mm (3 inch) tubing replaces restrictive 60mm factory tubing

 • Bolt on fitment - no hassle or poorly fitting parts when you choose IE

 • Constructed of 304 stainless long-lasting and high-quality material

 • Thick turbo flange - prevents leaks and warping

 • High flow 200 cell catalytic converter - full power with reduced pollution and smell

 • OEM style flex section - allows for more adjustment and won’t fail

 • All inclusive kit - downpipe, midpipes, all hardware

 • TIG welded construction - equates to long lasting welds that are less likely to fail

At CTS Turbo we are proud to announce our new air intake system for the Audi 3.0T and 3.2L FSI engines.  The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system.  Air then flows through our high flow cone air filter, which utilizes an inverted cone design for maximum engine breathing.  Our single piece CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air into the the engine providing peak power gains ranging from 5-8HP.  All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.
 

Only for B8 and B8.5 Audi S4/S5/Q5/SQ5 with 3.0T or 3.2L V6 engine!

Product Details:
- Mandrel bent aluminum piping with black powder coating
- Reusable air filter with inverted cone design
- 4 Ply silicon connector with stainless steel clamps
- Sealed air box with rubberized trim
- Bracketry to prevent rattling under engine torquing
- Billet SAI breather adapter and Billet bracket with SAI breather filter
- Gains ranging from 5-8HP

Installation guide can be downloaded here

P3 OBD2 Multi-Gauge

• Plug and Play install - just plug into your obd2 port and install into dash!
• Reads and clears OBD2 Codes
• OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer
• Peak Recall on all functions
• Boost and Vacuum from OBD2 port
• Optional 80psi analog boost sensor
• Optional Auto-Dim or Manual Dimmer
• 2 x universal 0-5v linear analog inputs
• Includes digital display, custom OBD2 wire harness and control box.

Optional 80psi boost sensor

• Allows gauge to read boost directly from intake/charge pipe
• Plugs directly into the OBD2 harness (no wiring required)
• Can be added/removed from the gauge at any time

Tubing kit

• Approximately 60" of 5/32" O.D. flexible plastic tubing
• 5/32" O.D. "T" fitting
• 3 sections of 5/32" I.D. vacuum hose

OEM vent option not available - Fits both left hand drive and right hand drive vehicles

 P3 Gauges offer a Multifunction gauge that gives you the information you need while maintaining a clean OEM look. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. 

All Multi-Gauges include an on-the-fly configuration menu for setting units (BAR/PSI, Farenheit/Celsius MPH/KPH), Shift light, analog boost sensor calibration and more. 

DETAILS

Side winglets sold separately.

Get the original and best side skirt splitter for your MK7 Golf GTI, which is trusted by Volkswagen enthusiasts, aftermarket modifiers and car tuners worldwide. Being the first to conceptualise, develop and manufacture the strongest front and side skirt splitters on the market, all our side splitters are backed by our 10 year warranty. Our 10mm polyethylene composite used in our side splitters are completely shatterproof and superior to any comparable ABS product - watch our front lip splitter stress test to see how durable our splitters really are. 

All Flow Designs MK7 Golf GTI side skirt splitters are designed, manufactured and dispatched from our factory in Bayswater Victoria, making us proudly Australian-made and owned. Once you order your front lip splitter, it is hand-finished, polished and quality inspected by our team to ensure you receive the highest quality and craftsmanship. 

All our side splitters are precision designed to accurately suit the OEM MK7 Golf GTI side skirt. Perfect fitment is guaranteed and instructions are provided for an easy installation process (which can be completed with simple hand tools). We have pre-drilled all our parts so there is no guesswork for you, with visual prompts so you know exactly where the side splitter sits on your MK7 Golf GTI OEM side skirt.

The Volkswagen MK7 Golf GTI side splitter range shares the same durability and technology as our renowned VA WRX, i30N and Ford Focus RS line up which is trusted by car enthusiasts worldwide.

Further customise your side skirt splitter with MK7 Golf GTI side winglets. These can be installed in our pre-pressed brass fittings already installed on the side splitter - the adjustable options allows you to match the width to the wheel setup of your Golf GTI. The complete MK7 Golf GTI Lip Splitter Kit is also available.

We offer fast Australia-wide and international shipping for all our products - join the worldwide Flow Family today!

---

VOLKSWAGEN MK7 GOLF GTI SIDE SKIRT SPLITTER KIT INCLUDES:

• Volkswagen MK7 Golf GTI side skirt splitters (pair)
• x2 Flow Designs stickers
• Fitting kit

VOLKSWAGEN MK7 GOLF GTI SIDE SKIRT SPLITTER MATERIAL & FINISH:

• 10mm thick polyethylene composite, bevelled edges
• Hand polished satin black