Audi - CTS Turbo - Forge Motorsports - H&R Springs - Integrated Engineering - Genuine VW - Eibach - Flow Designs - INA - Autotech
IE is proud to announce the best looking and highest performing air intake for the RS3 8V and TTRS 8S platforms.
To ensure the highest performance, no corners were cut or expenses spared.
A massive air filter, carbon fiber construction, large internal volume, and4-inch piping diameter ensure the engine breathes sufficiently and realizes large power gains across the entire powerband.
This is a tool to remove and install the driveshaft on 2017+ 8V Audi RS3 & 8S Audi TTRS.
Use this tool to safely and effectively remove or install the driveshaft (prop shaft) in your 2017+ Audi RS3 or TT-RS.
- Heavy duty steel construction
- Made in Canada
- Threaded to be used with most available slide-hammers (not required)
- Based on Audi factory tool
- Easy to use, save time when working on your car
- Required when removing or installing downpipe on RS3/TT-RS
- For vehicles with slip-fit driveshaft
**Comes with tubular crash bar to fit Australian spec cars**
Description
CTS Turbo is proud to announce our Direct fit FMIC for the 8V RS3/TTRS 2.5T EVO.
The OEM intercooler delivers underwhelming performance, this platform benefits greatly from an intercooler upgrade. Vehicles at stock boost levels, and especially on tuned cars will all see a large improvement over the factory equipped hardware.
This giant intercooler core is 42% larger than stock and meets our extensive quality control and pressure testing (up to 50psi). Cast aluminum end tanks attach to factory hoses seamlessly to ensure a boost-leak free fit that results in increased horsepower and torque.
Stock FMIC size: 6.3 tall x 25.3 wide x 3.2 thick = 510.05 in3
CTS FMIC size: 10.4 tall x 24 wide x 3.5 thick = 873.60 in3
Features:
- Efficient bar and plate construction
- Internal air-directing fins provide smooth flow and minimize pressure drop
- Low pressure drop, high air flow
- Designed using the latest 3D scanning technology
- Complete replacement for restrictive factory part
- Rated for power levels in excess of 700HP
- Cast aluminum end tanks results in superior flow
Download our Installation Guide Here
Sale
• Proven performance gains for Stage 2 power levels
• 76mm (3 inch) tubing replaces restrictive 60mm factory tubing
• Bolt on fitment - no hassle or poorly fitting parts when you choose IE
• Constructed of 304 stainless long-lasting and high-quality material
• Thick turbo flange - prevents leaks and warping
• High flow 200 cell catalytic converter - full power with reduced pollution and smell
• Metal matrix catalytic structure -
• OEM style flex section - allows for more adjustment and won’t fail
• All inclusive kit - downpipe, midpipes, all hardware
• TIG welded construction - equates to long lasting welds that are less likely to fail
Regular Price:
$1,699.00
Special Price
$1,574.95
CTS Turbo is proud to announce our proprietary high-flow downpipe for 2018+ Audi 8V RS3/8S TTRS with 2.5L TFSI EVO (EA855) engine.
This stainless steel high-flow downpipe that allows the user to remove the restrictive factory "main catalytic converters". This downpipe is a part of our modular exhaust system and it is compatible with factory or CTS Turbo mid-pipes.
We used CAD simulation to streamline the flow of exhaust gasses and ensure that it splits evenly into two outlets. Many hours of R&D were spent to ensure perfect fit, smooth exhaust flow and excellent sound.
Features:
Large 3.5" downpipe outlet splitting into dual 2.5" pipes
Durable 304 food-grade stainless steel
Laser cut flanges and precision machined v-band
Factory-like placement of O2 sensors
Designed using the latest 3D scanning technology
Exhaust flow simulated with CAD software to ensure optimal flow routing
Perfect fit with factory or aftermarket mid-pipes
Aggressive sound - really makes that 2.5T scream
No drone under normal driving conditions
Optional driveshaft removal tool (based on factory Audi tool, required to remove and install driveshaft)
Fitment:
2018+ Audi RS3 2.5T EVO (EA855)
2018+ Audi TTRS 2.5T EVO (EA855)
Note:
Check Engine Light will come on after the installation; we strongly recommend using "stage 2" software because the CEL deletes/emulators are not compatible with these cars.
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Splitters (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift (PFL) Sportback only
Details:
The Flow Designs splitter set for the Audi RS3 8V (PFL Sportback) include front & side splitters with a pair of rear spats. These are the perfect addition to your RS3 hatch, as Flow Designs splitters offer perfect fitment, easy installation & fast international & local delivery.
Kit Includes:
Spats (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift Sportback only
Details:
Make your Audi S3 8V Sportback unique with the Flow Designs front splitter (Pre-facelift Hatch only). Flow Designs splitters are the most durable on the market as they will never crack & are chip and abrasion resistant, with guaranteed perfect fitment to your S3 Hatch (PFL) & easy installation.
Kit Includes:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift Sedan only
Details:
Make your Audi S3 8V Sedan unique with the Flow Designs splitter set, complete with front & side splitters & a rear valance kit. Flow Designs splitters are the most durable on the market, with guaranteed perfect fitment to your S3 PFL sedan & easy installation.
Kit Includes:
Splitter
2 Flow Designs Stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.
Suits Pre-facelift Sedan only
Details:
Make your Audi S3 8V Sedan unique with the Flow Designs splitter set, complete with front & side splitters & a rear valance kit. Flow Designs splitters are the most durable on the market, with guaranteed perfect fitment to your S3 PFL sedan & easy installation.
Kit Includes:
Splitters (pair)
2 Flow Designs stickers
Fitting kit
Material:
10mm thick polyethylene composite, bevelled edges
Finish:
Hand polished satin black
Why do we use Polyethylene Composite for Flow Designs Splitters?
Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)
Carbon Fibre is better isn’t it?
As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.