Currently Shopping by
-
Brands:
CTS Turbo
Leyo Motorsport
WP Pro
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
Audi - CTS Turbo - Leyo Motorsport - Wortec
CTS TURBO MQB FWD EXHAUST WITH 200 CEL CAT DOWNPIPE (MK7/MK7.5 GOLF GTI, GLI, A3 1.8T FWD)
T304 Seamless Stainless Steel tubing -T304 Stainless Steel flanges -100% TIG Welded -T304 Stainless Steel 02 bung-Stainless Steel Clamps -200 Cell Catalytic converter -Great Sound even with factory exhaust, no drone!!$1,099.00
LEYO AIR Cold Air Intake System
Description:
LEYO Cold Air Intake System for the Polo GTI (AW) guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.
LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. Factory MAF sensor part is used to prevent anomaly in MAF sensor reading.
LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed airbox prevents heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.
Note:
-Only for petrol EA888.3b MQB cars, not for diesel cars.
-Only for vehicles with air flow sensor on factory intake.
-This product is only for use on the race track.
Specifications:
-
OEM fitment requires no fabrication.
-
3' inch diameter for greater air induction.
-
Unique quality and design.
-
Track and dyno proven for greater horsepower gain.
-
Heat shield included.
-
Direct bolt on & easy installation.
-
Easy installation.
-
Intake Heat shield.
$699.99-
LEYO AIR Cold Air Intake System
Description:
Leyo Motorsport’s CAI for the A4 B9 is a must have for those seeking to upgrade their car. By removing some factory air flow restrictions together with a massive 4 inch conical filter, this intake guarantees more horse power at an affordable cost.
High grade aluminum heat shield effectively blocks out excess heat from the engine bay while is also significantly lighter than the steel heat shields found on the market. A secondary heat shield is incorporated into the design to block excessive heat from the exhaust manifold.
Installation is easy and straight forward, no fabrication required.
*This product is only for use on the race track.
*Please note that if your car has air flow sensor on the inlet pipe, this intake does not fit.
Specifications:
-
4” high flow conical filter.
-
Aluminum heat shield.
-
Increased induction sound.
-
Easy installation.
$699.00-
LEYO - EA211(MQB) MK7 1.4 COLD AIR INTAKE SYSTEM V2
Description:
Replace your restrictive factory airbox with this new airbox from Leyo Motorsport. Meticulously engineered, this final design is the culmination of numerous air flow rendering and analysis.
High flow air filter ensures maximum air flow eliminating the air flow restrictions found in the stock airbox. More air means more usable power especially when paired with Leyo charge pipe for the MK7 1.4.Installation is simple and straightforward, in just minutes your engine bay will be transformed with the addition of this Leyo intake kit.
*This product is only for use on the race track.
Specifications:
-
Track and dyno proven for greater horsepower gain.
-
Maximum airflow.
-
Unique quality and design.
-
Simple installation.
$499.99-
LEYO - Oil Catch Can Kit V2 Black
Description:
Protect your engine by preventing excessive crankcase oil vapor entering the intake and carbon build up with LEYO Oil Catch Can Kit. Also known as blow-by, oil vapor is produced under load, spirited driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine.
Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO Oil Catch Can Kit had also included pre-installed drain valve, protecting your pride and joy has never been easier.
Specifications:
-
Installs under factory engine cover.
-
Uniquely designed filtration system.
-
Pre-installed drain valve for easy draining.
$919.00-
CTS MQB MK7/A3/S3 Turbo Outlet Pipe Kit (2.5")
2.5" Aluminum piping - OEM style pipe bracket - High quality tig welds - Durable powdercoat finish Hardware Included: - Silicone coupler - 2 x hose clamps - Installation hardware - Upper turbo outlet pipe - Lower turbo outlet pipe$349.00
CTS Turbo MK7 Billet Torque Arm Insert Type 1 (2015)
MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015) 8V Audi A3/S3 (up to production date Sept 27, 2015) MK3 Audi TT/TT-S (up to production date Sept 27, 2015)Regular Price: $79.95
Special Price $65.00
CTS TURBO MQB AWD EXHAUST DOWNPIPE (MK7/MK7.5 GOLF AWD, GOLF R, A3/S3 8V & 8V.5 TT/TT-S QUATTRO)
T304 Seamless Stainless Steel tubing -T304 Stainless Steel flanges -100% TIG Welded -T304 Stainless Steel 02 bung -Torca Accuseal Stainless Steel Clamps -Great Sound even with factory exhaust, no drone!! To ensure the best performance and operation, proper tuning software must be used (Stage 2 software from most large tuning companies is compatible).$1,199.00
CTS Turbo MQB (MK7/7.5 A3/S3 8V/8V.5) Throttle Pipe
Mandrel bent aluminum piping with durable black powder coating - CNC machined MAP flange - 4 Ply silicon connectors with stainless steel clamps - Integrated water methanol bung with plug - Stainless steel clamps$299.00
CTS Turbo MQB High Flow Turbo Inlet Pipe
Large inside diameter for extremely high flow Cast aluminum with CNC machined flanges Compatible with any intake system, including stock Durable aluminum construction, will not break like factory plastic part Simple installation Includes new o-ring Faster turbo spool, more airflow, improved turbo sound!Regular Price: $189.00
Special Price $179.00
SAFE & SECURE SHOPPING
