Audi - Vehicles - SHOP BY - Leyo Motorsport

LEYO - DSG Oil Filter Housing

Description:

Made from T6061 billet aluminum, LEYO DSG Oil Filter Housing not only adds aesthetic appeal to the engine bay, but specially designed fin also provides effective heat dispersion for the DSG under load. Heat resistant to prolong optimum operational temperature.

*Only fits 6 speed DSG DQ250 wet.

Specifications:

T6061 Billet aluminum construction.
Hard coat anodized finish for impeccable appearance and heat resistance.
Promotes oil heat dispersion.

$125.99

Add to Cart

LEYO - HIGH FLOW TURBO INLET PIPE

Description:

The higher the boost, more fuel and air is needed. To solve the issue with turbo lag, we’ve created our own designed Leyo Motorsport turbo inlet pipe. This full aluminium piece increases the reliability and unrestricted airflow direct to your turbocharger. With Leyo Motorsport’s research and developers, we’ve manufactured what we believe to be one of our best and most important performance product, the Leyo Motorsport turbo inlet pipe. More air being sucked into your turbo will allow horsepower gains not seen from OEM units. We’ve enhanced the size of the inlet pipe to give better throttle response, more linear power feed, and more leeway when tuning your performance vehicle.

Be sure you’re quick to order as demand is currently through the wastegate.

Specifications:

Full aluminium tubing.
CNC Aluminum OEM neck for secure fitment.
Fits all Air Intake system on the market.
Smooth, more linear power gains.
Larger than the OEM unit for increased air flow.
Simple installation.
Powder coated & laser etched logo.
Race Track Proven.

$199.00

Add to Cart

LEYO AIR Cold Air Intake System V2

Description:

This MQB Cold Air Intake System for the 2.0T engine guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.

Made with high grade full aluminum 3.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance

This newly designed intake can be used as both a closed or an open intake kit. Specially designed heat shield prevents heat soak, effectively extracting colder induction air.

Installation is simple and straight forward, no fabrication required.

Specifications:

OEM fitment requires no fabrication.
3.5’inch diameter for greater air induction.
Unique quality and design.
Track and dyno proven for greater horsepower gain.
Direct bolt on & easy installation.
Open or closed intake design.

$719.99

Add to Cart

LEYO AIR Cold Air Intake System V2 - Audi RS3 8V 17-18

Product Details:

Proudly presenting you Leyo Motorsport Cold Air Intake for the facelifted Audi RS3 with the all new 400HP aluminum block. This intake builds on the airbox design of our pre-facelift RS3 intake while integrating factory dampening design on the intake pipe. The intake pipe with the wide 100mm filter flange tapering to 76mm creating a velocity stack design efficiently feeds cold air into the turbo.

Specially designed air box prevents heat soak, effectively extracting colder induction air. For those that wants the open airbox design, Leyo RS3 intake airbox can be both enclosed or open. No fabrication required for installation, bolts straight onto factory mounting points.

*Fits up to 2019 model year.
*This product is only for use on the race track.

COMPATIBLE VEHICLES

Brand	Year	Model	Gen	Engine
Audi	2015-2017	RS3	8V.1	2.5TFSI

$749.00

Out of stock

LEYO - OIL CATCH CAN KIT V2 PLUS

Description:

LEYO Oil Catch Can Kit Plus with the new washer bottle delete integrated onto our MK7 oil catch can, owners of MK7 R and Audi S3 8V can now protect your engine with LEYO Oil Catch Can Kit Plus.

Our new washer bottle delete frees up the space taken by the top part of the washer bottle so that you have space for our Oil Catch Can. The aluminum washer bottle delete beautifully replaces the top section of the washer bottle while not disrupting the functionality of your washer.

Also known as blow-by, oil vapor is produced under load, spirited driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine.

Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO Oil Catch Can had also included pre-installed drain valve, protecting your pride and joy has never been easier.

Specifications:

Installs under factory engine cover.
Uniquely designed filtration system.
Pre-installed drain valve for easy draining.

$999.00

Out of stock

LEYO - Turbo Muffler Delete Black

Description:

More air comes in, more air goes out, and so the flow of energy from your turbo should not be wasted. The OEM turbo muffler is just that, a wasteful restrictive part hiding the true potential of your street or track weapon. Leyo Motorsport has in-house researched and developed its very own one piece design turbo muffler delete eliminating that inefficiency from the OEM part. Leyo Motorsport have created something special that allows greater throttle response, more aggressive power and that beautiful turbo spool in one stylish 6061 billet aluminium product. Finished in hard anodized coating, the Leyo Motorsport turbo muffler delete is the perfect companion to any engine enthusiast seeking more power.

To see the difference the Leyo Motorsport turbo muffler delete can have on your pride and joy. Be sure you are quick to order as demand is currently through the firewall.

Specifications:

Designed by Leyo and tested by the Leyo Motorsport team HQ.
Unique trumpet design for optimal flow and sound.
Machined to 0.01mm tolerance with Japanese laser technology.
Includes dual o-ring seals for prolonged turbo life.

$185.00

Add to Cart

LEYO - (MQB) MK7/8 GTI TURBO CHARGE PIPE

Description:

For more efficient and cooler air flow, be sure to compliment your ride with Leyo Motorsport’s Turbo Charge Pipes.

Our in-house designed full aluminium tubing allows a less restricted path between your intercooler and turbocharger housing. When performing real time testing, our research and developers found the OEM unit was not efficient in keeping intake air traveling smoothly all the way to the Manifold. This is where Leyo Motorsport turbo charge pipes comes in. We use a heavy duty silicon hose and clamp to maintain optimal high boost flow for stage 1 to stage 3 setups in your performance vehicle with extra WMI Bung. The Leyo Motorsport turbo charge piping is larger than the OEM unit allowing for smoother performance when tuning on a dyno.

Don’t let airflow be restricted, order your unique Leyo Motorsport turbo charge pipe kit today.

Specifications:

Improved air flow from the turbo all the way through.
Removes OEM restrictions.
Pipes made from heavy duty aluminum.
Connectors made from heavy duty silicon.
Perfect for Stock & Stage 1 through to 3 performance.
2 WMI Bung.
10mm larger than OEM.

ONLY FIT

For MQB 7 speed DQ381 and 6 speed DQ250 DSG gear box.
Stock Intercooler 60mm I.D.
Aftermarket uprated intercooler core with stock diameter connector 60mm I.D.

$679.99

Out of stock

LEYO - 8V.1 RS3 4" PIPING COLD AIR INTAKE SYSTEM

Description:

Introducing the refreshed Leyo intake system for 8V RS3 (pre-facelift) now with a massive 4” intake pipe! For those of you shopping for a new intake, on the 8V RS3, bigger IS better. Those that says the opposite have factory intake on their cars and you listening to them?

The 8V RS3 with its gorgeous 2.5l engine is one of the most tuned cars on the market. Unleash its full potential, feed more air into it as it has been begging you to. Our new 4” piping is a tuner’s dream come true.

*This product is only for use on the race track.

*This intake does not fit the 2017+ aluminum block 8V RS3.

Specifications: