Product Description

• Direct OEM replacement
• Made from the highest quality Aircraft quality T6061 billet aluminium construction
• Fully compatible with OEM electronics
• Fully serviceable piston
• Capable to 600HP (with uprated spring kit)
• Utilising world leading springs for more precise operation and consistency
• All internal and external components have been made in the UK
• Pistons use heat stabilised Viton O-rings
• Lubricated with high temperature Mobil1 grease
• Fully serviceable and rebuildable in minutes
• Unlike other valves on the market, ours produce no check engine lights (EML)
• Improved dynamic throttle response
• Consistent turbo boost & reduced turbo lag
• Covered by the Forge Lifetime Warranty*

Forge Motorsport were the OG’s of this original groundbreaking design, and we still lead the marketplace with customer service and after care with this innovative blow off valve - Often copied never bettered

This is our piston version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI/TFSI engine (US codes CPKA and CPRA) and 2.0 TSI/TFSI engine (Euro code CNTA, CHHA, CHHB, CHHC, CZPA, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!

Not only do you get the famous Forge blow off valve sound but this valve also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure, especially on tuned engines and modified vehicles.

Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!

This valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.

⭐ Great product! Fits perfect and sounds beautiful! 10/10 ⭐

⭐  Fitted the blow of valve today! Works and sounds perfect, not to mention the great customer service to make sure I ordered the correct one ⭐

⭐  Easy installation and sounds fantastic! Money well spent ⭐

In The Box:
1 x FMDVMK7A Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Uprated Blue Spring
10 x Cable Ties
1 x 1000mm of 4mm Vacuum Tube
1 x 5mm T Piece
1 x Instructions
1 x Forge Keyring and Sticker

 

At CTS Turbo we are proud to announce our new air intake system for the VW MK7 & MK7.5 Golf/GTI, MK7 & MK7.5 Golf R and facelift Audi A3/S3 is ready! This is the largest intake available, and it is excellent for tuned vehicles that require the extra air flow. 

The OEM air scoop works in conjunction with our sealed airbox to seamlesly force cold air into our air intake system.  Air then flows through our 3.5" high flow air filter, which utilizes an inverted cone design for maximum engine breathing.  Our 3.5" CNC mandrel bent aluminum intake pipe allows for smooth entry of cold air directly into the the engine, minimizing turbulence from unnecessary connections. All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race inspired sound.

Peak power gains range from 10-15HP on an otherwise stock vehicle. We recommend disabling your Soundaktor (noise amplifier) to fully enjoy the true sound of your motor and remove excessive drone caused by the device.

Product Details:

• Mandrel bent large bore 3.5" aluminum piping with black powder coating
• Coveted Laser etched //CTS Turbo logo
• 3.5" Reusable air filter with inverted cone design
• 4 Ply silicon connectors with stainless steel clamps
• Sealed air box
• Bracketry to prevent rattling under engine torquing
• Billet SAI breather adapter and filter (Optional in drop down menu)

• 2014+ VW Golf (all models)
• 2014+ VW GTI 
• 2014+ VW Golf R
• 2018+ Audi A3 (all models)
• 2018+ Audi S3

 NOTE: If you have a Golf, GTI or A3 you will require the SAI breather adapter and filter. Only for vehicles WITHOUT a MAF sensor.

CONFIRM ON YOUR CAR BEFORE ORDERING!

IE is proud to announce the best looking and highest performing air intake for the RS3 8V and TTRS 8S platforms.

To ensure the highest performance, no corners were cut or expenses spared.

A massive air filter, carbon fiber construction, large internal volume, and4-inch piping diameter ensure the engine breathes sufficiently and realizes large power gains across the entire powerband.

This is a tool to remove and install the driveshaft on 2017+ 8V Audi RS3 & 8S Audi TTRS.

Use this tool to safely and effectively remove or install the driveshaft (prop shaft) in your 2017+ Audi RS3 or TT-RS. 

• Heavy duty steel construction
• Made in Canada
• Threaded to be used with most available slide-hammers (not required) 
• Based on Audi factory tool
• Easy to use, save time when working on your car
• Required when removing or installing downpipe on RS3/TT-RS
• For vehicles with slip-fit driveshaft

**Comes with tubular crash bar to fit Australian spec cars**

 • 76mm (3 inch) tubing replaces restrictive 60mm factory tubing

 • Bolt on fitment - no hassle or poorly fitting parts when you choose IE

 • Constructed of 304 stainless long-lasting and high-quality material

 • Thick turbo flange - prevents leaks and warping

 • High flow 200 cell catalytic converter - full power with reduced pollution and smell

 • OEM style flex section - allows for more adjustment and won’t fail

 • All inclusive kit - downpipe, midpipes, all hardware

 • TIG welded construction - equates to long lasting welds that are less likely to fail

CTS Turbo is proud to announce our proprietary high-flow downpipe for 2018+ Audi 8V RS3/8S TTRS with 2.5L TFSI EVO (EA855) engine. This stainless steel high-flow downpipe that allows the user to remove the restrictive factory "main catalytic converters". This downpipe is a part of our modular exhaust system and it is compatible with factory or CTS Turbo mid-pipes. We used CAD simulation to streamline the flow of exhaust gasses and ensure that it splits evenly into two outlets. Many hours of R&D were spent to ensure perfect fit, smooth exhaust flow and excellent sound. Features: Large 3.5" downpipe outlet splitting into dual 2.5" pipes Durable 304 food-grade stainless steel Laser cut flanges and precision machined v-band Factory-like placement of O2 sensors Designed using the latest 3D scanning technology Exhaust flow simulated with CAD software to ensure optimal flow routing Perfect fit with factory or aftermarket mid-pipes Aggressive sound - really makes that 2.5T scream No drone under normal driving conditions Optional driveshaft removal tool (based on factory Audi tool, required to remove and install driveshaft) Fitment: 2018+ Audi RS3 2.5T EVO (EA855) 2018+ Audi TTRS 2.5T EVO (EA855) Note: Check Engine Light will come on after the installation; we strongly recommend using "stage 2" software because the CEL deletes/emulators are not compatible with these cars.

Brand: T-Carbon Product Type: Paddle Shifter Extensions

Description