- Gain over 10+ horsepower and torque with tuning
- Available with optional high gloss carbon fiber lid
- Adds aggressive motorsport turbo and engine sound
- Full-width air inlet spans entire radiator support
- High-flow built in velocity stack & 5″ air filter
- 3.5″ turbo inlet pipe and silicone – removes factory restrictions
- Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
- Through-flow flat surface 3-ply couplers
- Perfect fitment by utilizing factory airbox mounts
- Black powder coated inlet pipe and heat shield
- Stealth coolant line included at no extra cost
- Works with/without SAI – no need to buy an extra kit
Currently Shopping by
-
performance:
Air Intake
Electrical
Exhaust
Turbo
- Brands: Remove This Item Integrated Engineering
- Filter By Custom Stock Status
- Filter By performance
- Filter By Category
- Filter By Brands
- Filter By Price
- -
GTI/GTD - Integrated Engineering
IE VW/AUDI DSG (DQ250) Transmission Tune | Fits VW MK6 GTI MK6 R & Scirocco R, Jetta, GLI, & Audi 8J TTS
SHIFT FASTER, DRIVE FASTER The IE DSG Tune for your VW MK6 GTI, Jetta, GLI, or Audi 8J TTS 2.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 2.0T TSI into a fully rounded performance monster. LEADING FEATURES Lightning fast gear shifts Higher shift points of 6800 RPM Kick down in manual mode eliminated Lag time reduced when starting off in first gear Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000 Drive shift mapping entirely reworked with an enthusiast in mind Flashed directly through OBD-II Port (No TCU removal required) Works flawlessly with an IE ECU tune Increased clutch pressure on tap for higher torque without slip Temperature protection remains for safety Gear hunting reduced Gearbox “Torque Limiters” removed WHAT DOES A DSG TRANSMISSION TUNE DO? The IE DSG Tune for the MK6 2.0T TSI has been carefully set up to make the car way more fun to drive. It completely reworks the shift point mapping in both drive and sport. The transmission will no longer lug the engine in drive mode. Clutch clamping forces are increased so the transmission can safely handle much more power. Shifts are much, much faster taking time directly off the 0-60 and ¼ mile times. ONE TUNE FOR ALL STAGES IE’s TCU/DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset. A great deal of sportiness is added from the tune while maintaining factory smoothness and driveability. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve from faster shifting. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. USER ADJUSTABLE LAUNCH CONTROL The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! Available Launch Control RPMs: 3200 RPM 3400 RPM 3600 RPM 3800 RPM 4000 RPM IE DSG TUNE TECHNICAL FEATURES HIGHER SHIFT POINTS Utilize the whole powerband of your 2.0 TSI engine without the DSG interfering and shifting early. DRIVE MAPPING REWORKED The MK6 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode. INCREASED CLUTCH PRESSURE Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive. FLASHED THROUGH OBD-II PORT There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes. TAKE-OFF LAG REDUCED The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop. MULTIPLE LAUNCH RPMS The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain FLAWLESS OPERATION WITH IE ECU TUNES The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI engine and transmission. VEHICLE FITMENT VW - MK6 GTI 2010-2014 (MK6) 2.0T EA888 Gen1/2 TSI engines VW - MK6 Jetta 2011-2013.5 (MK6) 2.0T EA888 Gen1/2 TSI engines* VW - MK6 GLI 2011-2013.5 (MK6) 2.0T EA888 Gen 1/2 TSI engines* AUDI - TTS 2008-2015 (8J) 2.0T TFSI EA113 engines *This DSG calibration is for 2.0T TSI EA888 Gen 1 & 2 engines only. Many Jetta and GLI models are equipped with a new engine variation (EA888 Gen 3) after 2013.5 and later. This tune does NOT support Gen 3 model engine TCUs. Please verify if your engine is an EA888 Gen 1/2 2.0T TSI or EA888 Gen 3 2.0T TSI tune before ordering. IE DSG tunes are available only for vehicles equipped with 6 speed DSG (DQ250) transmissions. Does not function with manual 6-speed transmission cars.Regular Price: $929.00
Special Price $875.00
IE MQB VW MK7/MK7.5 GTI, Golf, & Audi A3 Performance Cast Downpipe (FWD)
The IE Catted Cast Downpipe for VW & Audi MQB incorporates the best of all worlds. Cast bend sections enable the highest flow and best fitment possible. Impressive performance gains will be realized when used with an IE stage 2 ECU tune. Lastly, the aggressive sound from an unrestricted exhaust system is guaranteed to be music to your ears. Product Features • Proven performance gains • 76mm (3 inch) tubing replaces restrictive 60mm factory tubing • Bolt on fitment - no hassle or poorly fitting parts when you choose IE • Constructed of 304 stainless piping - long-lasting and high-quality material • Thick turbo flange - prevents leaks and warping • High flow 200 cell catalytic converter - full power with reduced pollution and smell • Metal matrix catalytic structure - • OEM style flex section - allows for more adjustment and won’t fail • All inclusive kit - downpipe, mid pipes, all hardware • TIG welded construction - equates to long-lasting welds that are less likely to fail • Install instructions - available by CLICKING HERE MQB PERFORMANCE DOWNPIPE OVERVIEW When upgrading your VW MK7 or Audi 8V A3 to stage 2 software you will also need to reduce the back pressure caused by the small diameter stock pipe. With the exhaust system flowing better performance gains be achieved. Turbo lag should also be reduced as an added benefit. IE engineers guarantee a perfect fit by designing all IE downpipes in-house using the latest technology. Digital scanning is using to scan the entire environment which ensures that there is proper clearance and that all mounting points are in the correct location. Manufactured from 304 stainless offers a life-long product that brings performance and fun to the table for years to come. POWER GAINS The most power gains will be achieved when the IE Downpipe is paired with IE matching software, air intake, and FDS intercooler. SOUND TUNING An aggressive and drone-free sound will be emitted from the IE Cast Downpipe. This should be music to your ears! Thick wall tubing and cast sections remove much of “tinny” sound emitted by cheaper, thin wall, downpipes. With downpipes, you get what you pay for in terms of sounds and overall manufacturing quality. HIGH-FLOW CATALYTIC CONVERTER IE’s performance downpipe includes a high-flow 200 cell per inch metal matrix catalyst located as close to the turbo as possible. Metal matrix catalysts are higher performance because the matrix web is thinner, allowing higher flow in the same size. Our catalyst is also a very large diameter, allowing a large flow area and maximum power. By being placed close to the turbo, emissions and unwanted unpleasant smells are greatly reduced. DIRECT BOLT-ON WITH PERFECT FITMENT The IE downpipe replaces over 6 feet of restrictive factory exhaust tubing, all the way back to the OE “Cat-Back” rear section. Sturdy fabricated mounts and precise engineering result in a rattle free and long last replacement exhaust system. 3D scanning systems were employed to ensure perfect placement both in pre and post-production phases. INSTALLATION Installation should be completed by a professional and preferably on an auto lift. CLICK HERE to view and download the install guide. *This product is not CARB certified and thus is not available for purchase in the state of California. VEHICLE FITMENT Audi - A3 MK3/8V 1.8T & 2.0T engines (FWD only)* VW - GTI MK7 2.0T engine VW - GTI MK7.5 2.0T engine VW - Golf MK7 1.8T & 2.0T engine (FWD only)* VW - Golf MK7.5 1.8T & 2.0T engine (FWD only)* *This downpipe system includes a mid pipe that is specially designed to fit Gen 3 1.8T and 2.0T engines in front-wheel drive (FWD) vehicles only. All-wheel drive (AWD) Quattro, or 4 Motion vehicles require a different mid pipe section included in our AWD MQB downpipe kit IE Part Number: IEEXCI1. Please verify if your vehicle is AWD or FWD before ordering. ADDITIONAL REQUIRED MODIFICATIONS Installing a downpipe to your Gen 3 1.8T or 2.0T vehicle requires a matching stage 2 ECU tune to operate properly.Regular Price: $1,629.00
Special Price $1,499.00
IE VW & Audi 2.0T Gen 3 IS20 MQB Performance ECU Tune | Fits MK7/MK7.5 GTI, GLI, & 8V A3 MY2016+ ONLY
Regular Price: $929.00
Special Price $836.00
IE MQB 2.0T/1.8T Gen 3 Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3
LEADING FEATURES
PRODUCT DETAILS
We were uncompromising in our quest to build the ultimate cold-air intake, the one we wanted for our own cars. Here’s why you’ll love it too:
POWER GAINS
On turbo engines more flow equals more power! Putting performance first, the ram air design, velocity stack, 3.5″ inlet pipe, and massive 5-inch filter all function to deliver the most power possible from an intake system. This Intake design delivers a massive flow increase over the stock air box, resulting in over 10 horsepower and torque over stock and far exceeds this on hybrid or large turbo setups.
MODULAR DESIGN
At the base of our intake is an alloy heat shield that spans the entire front of the car for maximum fresh air flow, seals off hot engine bay air, and securely holds the velocity stack and air filter. The modular design allows for an optional carbon fiber lid to be installed further sealing off the intake from radiant engine heat and provides a high-end gloss carbon finish to your engine bay.
PERFECT FITMENT & APPEARANCE
IE engineers utilize cutting edge 3D scanners and specialized software to create a digital model of the engine bay. This digital environment ensures the intake clears and fits exactly like a factory-installed unit. Rapid printed prototypes are then used to ensure fitment in actual vehicles before moving onto production. The result is an intake that provides a hassle-free install with angles and curves that not only look at home in your engine bay, but elevates the style completely.
FULLY INCLUSIVE KIT
Everything needed to install your new IE intake is included without having to make any trips to the hardware store or purchase additional add-on kits. Included is our stealth coolant line, which completely hides under the intake and out of view. This protects the coolant line from interfering or rubbing on anything that may lead to future coolant leaks. For vehicles equipped with secondary air injection (SAI) the IE intake is equipped to connect to the factory line without having to purchase an additional kit. Don’t have SAI? No worries, a plug is also included.
MOTORSPORT PERFORMANCE & SOUND
Delivering cooler air and in enough volume is a must for making power. To accomplish a ram-air design, our engineers utilize large piping and a velocity stack to efficiently deliver as much air as possible. We know a fast car is fun to drive, but a good sounding one really puts a smile on your face. The high-velocity bellmouth and free flow design of our intake also produces the exciting side effect of amplifying engine notes and turbo sounds that create a unique experience every time you push the the throttle down.
VEHICLE FITMENT GUIDE
MAKE MODEL YEAR ENGINE(S) VW
GTI
MK7-MK7.5 2015-2019
2.0T
VW
Golf R
MK7-MK7.5 2015-2019
2.0T
VW
Golf
MK7-MK7.5 2015-2019
2.0T & 1.8T
VW
GLI
MK7 2019
2.0T
VW
Golf Alltrak
MK7-MK7.5 2015-2019
2.0T & 1.8T
Audi
A3
8V 2015-2019
2.0T & 1.8T
Audi
S3
8V 2015-2019
2.0T
Regular Price: $799.00
Special Price $739.95
IE Turbo Outlet Muffler Delete for VW MK7/MK7.5 & Audi 8V/8S 2.0T Engines
Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI$249.00
IE Turbo Inlet Pipe for VW & Audi 2.0T/1.8T Gen 3 Engines | Fits VW MK7 & Audi 8V
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.TURBO INLET PIPE FEATURES
- Greatly improves air-flow to turbocharger
- Constant high-flow inner diameter
- Easy install, no modifications necessary
- Long life cast aluminum alloy
- In-house CNC machined for perfect fitment
- No leak o ring seal to turbocharger
- Outflows stock inlet by 110CFM
IS YOUR STOCK INLET ROBBING POWER?
The factory installed plastic turbo inlet found installed on your VW or Audi Gen 3 1.8T or 2.0T TSI engine is adequate enough for stock cars with factory hardware and ECU calibrations. However, the necked down design becomes a major flow restriction when ran with power upgrades such as cold air intakes, intercoolers, downpipes, and ECU upgrades.
UPGRADE YOUR TURBO INLET PIPE
The IE Turbo Inlet Pipe helps you to get the most out of your IS38 or IS20 turbo and power upgrades by removing the factory flow restriction. The cast aluminum design allows for a constant diameter elbow increasing efficiency from the intake to the turbo without the bottleneck design of the factory unit.
HORSEPOWER RESULTS
Dyno graph tested on a 2019 GTI with Stage 2 hardware & software on 93 octane
EASY INSTALLATION
Your new turbo inlet pipe has been in-house CNC machined and includes all required hardware to allow for a perfect and easy installation. View and download the install guide here (coming soon).
REQUIRES AFTERMARKET INTAKE
Due to the larger size of your new inlet pipe, this must be installed with an aftermarket intake. A new silicone adapter is supplied to be a direct fit with a IE Cold Air Intake, or most 3 inch cold air intakes.
Does not work with the DV+ Diverter Valve or Diverter Valve spacers.VEHICLE APPLICATIONS
- Audi - A3 2015+ 8V 1.8T & 2.0T engines
- Audi - S3 2015+ 8V 2.0T engine
- Audi - TT 2016+ 8S 2.0T engine
- Audi - TTS 2016+ 8S 2.0T engine
- VW - Golf R 2015+ MK7 2.0T engine
- VW - GTI 2015+ MK7 2.0T engine
- VW - Golf/Alltrak 2015+ MK7 1.8T & 2.0T
- VW - Passat 2013+ B8 1.8T & 2.0T (EA888 Gen 3) engines
- VW - Tiguan 5N 2017+ 2.0T (EA888 Gen 3) engine
Regular Price: $225.00
Special Price $219.95
IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3
LEADING FEATURES
- Gain over 10+ horsepower and torque with tuning
- Available with optional high gloss carbon fiber lid
- Adds aggressive motorsport turbo and engine sound
- Full-width air inlet spans entire radiator support
- High-flow built in velocity stack & 5″ air filter
- 3.5″ turbo inlet pipe and silicone – removes factory restrictions
- Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
- Through-flow flat surface 3-ply couplers
- Perfect fitment by utilizing factory airbox mounts
- Black powder coated inlet pipe and heat shield
- Stealth coolant line included at no extra cost
- Works with/without SAI – no need to buy an extra kit
PRODUCT DETAILS
We were uncompromising in our quest to build the ultimate cold-air intake, the one we wanted for our own cars. Here’s why you’ll love it too:
POWER GAINS
On turbo engines more flow equals more power! Putting performance first, the ram air design, velocity stack, 3.5″ inlet pipe, and massive 5-inch filter all function to deliver the most power possible from an intake system. This Intake design delivers a massive flow increase over the stock air box, resulting in over 10 horsepower and torque over stock and far exceeds this on hybrid or large turbo setups.
MODULAR DESIGN
At the base of our intake is an alloy heat shield that spans the entire front of the car for maximum fresh air flow, seals off hot engine bay air, and securely holds the velocity stack and air filter. The modular design allows for an optional carbon fiber lid to be installed further sealing off the intake from radiant engine heat and provides a high-end gloss carbon finish to your engine bay.
PERFECT FITMENT & APPEARANCE
IE engineers utilize cutting edge 3D scanners and specialized software to create a digital model of the engine bay. This digital environment ensures the intake clears and fits exactly like a factory-installed unit. Rapid printed prototypes are then used to ensure fitment in actual vehicles before moving onto production. The result is an intake that provides a hassle-free install with angles and curves that not only look at home in your engine bay, but elevates the style completely.
FULLY INCLUSIVE KIT
Everything needed to install your new IE intake is included without having to make any trips to the hardware store or purchase additional add-on kits. Included is our stealth coolant line, which completely hides under the intake and out of view. This protects the coolant line from interfering or rubbing on anything that may lead to future coolant leaks. For vehicles equipped with secondary air injection (SAI) the IE intake is equipped to connect to the factory line without having to purchase an additional kit. Don’t have SAI? No worries, a plug is also included.
MOTORSPORT PERFORMANCE & SOUND
Delivering cooler air and in enough volume is a must for making power. To accomplish a ram-air design, our engineers utilize large piping and a velocity stack to efficiently deliver as much air as possible. We know a fast car is fun to drive, but a good sounding one really puts a smile on your face. The high-velocity bellmouth and free flow design of our intake also produces the exciting side effect of amplifying engine notes and turbo sounds that create a unique experience every time you push the the throttle down.
VEHICLE FITMENT GUIDE
MAKE MODEL YEAR ENGINE(S) VW
GTI
MK7-MK7.5 2015-2019
2.0T
VW
Golf R
MK7-MK7.5 2015-2019
2.0T
VW
Golf
MK7-MK7.5 2015-2019
2.0T & 1.8T
VW
GLI
MK7 2019
2.0T
VW
Golf Alltrak
MK7-MK7.5 2015-2019
2.0T & 1.8T
Audi
A3
8V 2015-2019
2.0T & 1.8T
Audi
S3
8V 2015-2019
2.0T
Regular Price: $1,498.00
Special Price $1,299.00
IE MQB 2.0T/1.8T Gen 3 Carbon Fiber Cold Air Intake Lid Only (No Intake) | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3
PRODUCT DETAILS
IE Performance Cold Air Intake V2 Carbon Fiber Lid (No Intake)
The all-new Integrated Engineering 2.0T Gen 3 Cold Air Intake System for the VW/Audi MQB platform has been completely reimagined and redesigned from the ground up. Featuring a new 3.5" turbo inlet pipe and heat shield that spans the entire length of the radiator inlet to support massive power gains from even large turbo and hybrid setups. New modular design allows the intake to be ran as a cost-friendly open filter intake, or upgraded with a high-gloss carbon fiber assembly further reducing hot engine bay air and adding a high-quality style to your engine bay.
Included:- High-Gloss Carbon Fiber Intake Lid
PACKAGE CONTENTS:
- High-gloss Carbon Fiber Lid ONLY (THIS LISTING DOES NOT INCLUDE THE INTAKE)
Get The Complete Carbon Fiber Intake Kit (See below):
This product page is only for the carbon fiber lid. This does not include an intake. We've bundled the intake and cover for your convinience. Combine Performance and style.
IE Carbon Fiber Performance Cold Air Intake V2 For Audi/VW MQB MK7/8V - IEINCI11-KT
DISCONTINUED PART NUMBERS & V1 INTAKE:
With the announcement of our all-new modular MQB intake comes the end of our previous open filter and carbon fiber models. The new intake is higher performing, improved fit, and more budget-friendly for the carbon variation.- IEINCI2 -MQB TSI Cold Air Intake (Open FIlter)
- IEINCI1 -MQB TSI Carbon Fiber Cold Air Intake
- IEINCI3 -Carbon Fiber Inlet Pipe
VEHICLE FITMENT GUIDE
MAKE MODEL YEAR ENGINE(S) VW
GTI
MK7-MK7.5 2015-2019
2.0T
VW
Golf R
MK7-MK7.5 2015-2019
2.0T
VW
Golf
MK7-MK7.5 2015-2019
2.0T & 1.8T
VW
GLI
MK7 2019
2.0T
VW
Golf Alltrak
MK7-MK7.5 2015-2019
2.0T & 1.8T
Audi
A3
8V 2015-2019
2.0T & 1.8T
Audi
S3
8V 2015-2019
2.0T
Regular Price: $699.00
Special Price $659.95
IE Carbon Fiber Intake System For Audi B9 S4 & S5 3.0T
Your car deserves the performance, sound, and quality from an intake system that reflects the Audi S trim as a true performance machine. IE's engineers took a "no expense spared" approach to design the ultimate intake system solution that delivers on looks, fit, and most importantly -power!
PERFORMANCE TESTING
No part of this intake design is by accident, every inch is engineered and tested for performance first. Countless revisions undergo dyno testing, flow bench, and real-world use to maximize potential. As a result of this testing, the massive air filter, built-in velocity stack, large internal volume, ram air inlet, and bottom plate louvers ensure the intake supplies more than enough airflow across the entire powerband for any ECU tune or turbo setup.
CARBON FIBER - MORE THAN STYLE POINTS
In order to maximize airflow, a large internal volume is required to support the necessary amount of flow for the engine. Carbon fiber construction allows our engineers to create complex shapes and angles that just can not be achieved with sheet metal bends. This design style utilizes every millimeter available in oddly shaped modern engine bays for a very large air supply and smooth delivery. The finished product results in a performance design with a stylized high-end look for your engine bay.
UNIQUE SOUND
You drive a flagship S model Audi with a 6 cylinder turbocharged engine -make it sound like one!
The factory intake kills any and all engine sound to meet requirements for everything but fun. By upgrading to an IE intake system, you are taking full advantage of a performance design including the turbocharger spool, engine throttle, and diverter valve sounds that come along with it. The unique velocity stack and bottom louver design create a tuned engine note that sounds classy, yet powerful at the same time. This level of sound is not heard through other brand closed box intakes and is a much more refined sound than found with open element style intakes. Get ready to sing the song of power!
SEAMLESS DESIGN
The only fully carbon 1-piece intake design on the market offers more than a fantastic look alone. This reduces the chances of air leaks from an airbox/air duct joint, finicky installs, rubbing noises, or parts working loose over time while also providing an easier install. Furthermore, this is a complete all-inclusive intake system that does not require any additional parts sold separately to complete the intake.
EASY INSTALLATION
This Intake fits Audi B9 S4 & S5 3.0T V6 Turbocharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allow for natural engine movement which keeps intake components from getting damaged.
HIGH-FLOW VELOCITY STACK
By incorporating a professional motorsport style velocity stack into the airbox design, airflow is channeled from the large internal airbox volume into the turbocharger as quickly as possible. The bellmouth shape creates a very high inertia flow from the massive filter with very low drag or power-robbing turbulence.
MULTIPLE PRESSURE ZONES
Engineered to support any power level, the intake takes advantage of multiple air supply avenues. The front large air inlet receives outside high-pressure flow from the front of the grille and acts as a ram air design for the majority of the air supply. Additionally, the bottom plate louvers pull extra required air as needed from the low-pressure zone under the intake. These dual zones provide an unrestricted supply of air across the entire filter and ensure your intake will never be a power limiter for even the most extreme builds.
PRECISION FIT
To ensure a perfect fit, 3D scanning tools are used to create a digital duplicate of the vehicle's engine bay, grille, bumper, and hood. This provides an incredibly high-resolution environment to reverse engineer and prototype the intake design. This not only allow engineers to take advantage of all available room but also results in a perfect and extremely high-end install.
QUALITY COMPONENTS
No flimsy parts or quality sacrifices found here! Only the best materials and design features were used for a top-tier look, fit, function, and long-life reliability.
SPECIFICATIONS
- High-gloss true carbon fiber construction
- Factory style mounts
- Stainless hardware
- Multi-ply silicone with stop-flat edges
- High-quality clamps
- Powder-coated aluminum bottom plate
- Stainless laser-etched logo plate
- 5" pleated cotton filter
COMPATIBILITY
- 2017-On Audi S4 B9 3.0T Turbocharged
- 2017-On Audi S5 B9 3.0T Turbocharged
$1,664.00
IE Audi 3.0T Cold Air Intake | Fits C7 A6 & A7 (2010 - 2018)
IE’s cold air intake has been obsessively engineered for performance first using professional motorsport practices and computational flow dynamic software. The result is a uncompromising intake system that sounds and performs for the street or track with a sophisticated and sporty design.
EASY INSTALL
BOLT-ON DESIGN
NO MODIFICATIONSADDS HORSEPOWER
UP TO +21HP
ON TUNED ENGINESFLOW OPTIMIZED
VELOCITY STACK
MOTORSPORT DESIGNPOWER UP
Introduce a jump in power to your 3.0T supercharged engine in under an hour with peak gains of 15-20+HP/TQ on tuned engines.
HIGH-FLOW VELOCITY STACK
Delivering cold air effectively for power takes more than just an open filter. Employing velocity stack technology like that found in professional Motorpsorts and adapting it for the 3.0T engine, efficiently channels air as quickly as possible. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling or rubbing on heat shields.
DESIGN FEATURES
ULTIMATE AIR FLOW
Upgrading your ECU tune, pulleys, and other power adders requires airflow beyond that of the factory intake box. IE’s intake feeds an impressive flow of air from the front of the vehicle directly to your supercharger. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System. -Oh, and it sounds FANTASIC too!
QUALITY COMPONENTS
The multi-piece heat shield not only looks great, but it built to perform by effectively channeling cold air from the front of the car to the massive air filter. The location, shapes, and angles of the heatshield are no accident, these are all designed to protect the intake from hot air surrounding the engine bay.
EXACT FIT
This Intake fits Audi C7 A6 & A7 3.0T V6 Supercharged engines without any modifications or hassles. The install process is simple and can be done quickly with basic tools. IE intakes utilize the factory airbox mounts ensures a perfect and long-life fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.
VEHICLE FITMENT GUIDE:
MAKE MODEL YEAR ENGINE AUDI
A6
2010-2018 (C7/C7.5)
3.0T Supercharged
AUDI
A7
2010-2018 (C7/C7.5)
3.0T Supercharged
Regular Price: $702.00
Special Price $689.00
Copyright © 2021, VW Central, All Rights Reserved
SAFE & SECURE SHOPPING
