You have no items in your shopping cart.

Product was successfully added to your shopping cart.

.: R Models - IPE - IROAD - H&R Springs - Integrated Engineering - T-carbon - P3 Cars

Set Descending Direction

   

Items 21 to 30 of 42 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. IE VW/AUDI DSG (DQ250) Transmission Tune | Fits VW MK6 GTI MK6 R & Scirocco R, Jetta, GLI, & Audi 8J TTS IE VW/AUDI DSG (DQ250) Transmission Tune | Fits VW MK6 GTI MK6 R & Scirocco R, Jetta, GLI, & Audi 8J TTS
    Sale

    IE VW/AUDI DSG (DQ250) Transmission Tune | Fits VW MK6 GTI MK6 R & Scirocco R, Jetta, GLI, & Audi 8J TTS

    SHIFT FASTER, DRIVE FASTER The IE DSG Tune for your VW MK6 GTI, Jetta, GLI, or Audi 8J TTS 2.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 2.0T TSI into a fully rounded performance monster. LEADING FEATURES Lightning fast gear shifts Higher shift points of 6800 RPM Kick down in manual mode eliminated Lag time reduced when starting off in first gear Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000 Drive shift mapping entirely reworked with an enthusiast in mind Flashed directly through OBD-II Port (No TCU removal required) Works flawlessly with an IE ECU tune Increased clutch pressure on tap for higher torque without slip Temperature protection remains for safety Gear hunting reduced Gearbox “Torque Limiters” removed WHAT DOES A DSG TRANSMISSION TUNE DO? The IE DSG Tune for the MK6 2.0T TSI has been carefully set up to make the car way more fun to drive. It completely reworks the shift point mapping in both drive and sport. The transmission will no longer lug the engine in drive mode. Clutch clamping forces are increased so the transmission can safely handle much more power. Shifts are much, much faster taking time directly off the 0-60 and ¼ mile times. ONE TUNE FOR ALL STAGES IE’s TCU/DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset. A great deal of sportiness is added from the tune while maintaining factory smoothness and driveability. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve from faster shifting. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes. USER ADJUSTABLE LAUNCH CONTROL The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! Available Launch Control RPMs: 3200 RPM 3400 RPM 3600 RPM 3800 RPM 4000 RPM IE DSG TUNE TECHNICAL FEATURES HIGHER SHIFT POINTS Utilize the whole powerband of your 2.0 TSI engine without the DSG interfering and shifting early. DRIVE MAPPING REWORKED The MK6 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode. INCREASED CLUTCH PRESSURE Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive. FLASHED THROUGH OBD-II PORT There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes. TAKE-OFF LAG REDUCED The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop. MULTIPLE LAUNCH RPMS The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup! KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain FLAWLESS OPERATION WITH IE ECU TUNES The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI engine and transmission. VEHICLE FITMENT VW - MK6 GTI 2010-2014 (MK6) 2.0T EA888 Gen1/2 TSI engines VW - MK6 Jetta 2011-2013.5 (MK6) 2.0T EA888 Gen1/2 TSI engines* VW - MK6 GLI 2011-2013.5 (MK6) 2.0T EA888 Gen 1/2 TSI engines* AUDI - TTS 2008-2015 (8J) 2.0T TFSI EA113 engines *This DSG calibration is for 2.0T TSI EA888 Gen 1 & 2 engines only. Many Jetta and GLI models are equipped with a new engine variation (EA888 Gen 3) after 2013.5 and later. This tune does NOT support Gen 3 model engine TCUs. Please verify if your engine is an EA888 Gen 1/2 2.0T TSI or EA888 Gen 3 2.0T TSI tune before ordering. IE DSG tunes are available only for vehicles equipped with 6 speed DSG (DQ250) transmissions. Does not function with manual 6-speed transmission cars.

    Regular Price: $929.00

    Special Price $875.00

  2. P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – MK6 Golf R P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – MK6 Golf R
    Sale

    P3 Cars OBD2 Vent Multi-Gauge V3 2019 Release – MK6 Golf R

    P3 Digital gauges provide the highest level of OEM integration and colour match offering more features than any other gauges in their segment. Starting at a price competitive to single feature old-school needle gauges, they offer unmatched feature to price ratio. All gauge models include an on-the-fly configuration menu for setting units (BAR/PSI for boost, and C/F MPH/KPH for multi-gauge values), as well as feature options, and ambient calibration. Features: Boost and Vacuum from OBD2 port Plug and Play install – just plug into your obd2 port and install into dash! Optional analog sensor for reading boost on tuned/big turbo cars. OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Speed, RPM with Shift-light, Battery voltage and more! Optional Auto-Dim or Manual Dimmer Code Read/Clear 2 x universal 0-5v linear analog inputs Includes Digital Display, Custom OBD Wire Harness, Control Box. Please note that the gauge does not come pre-installed in the air conditioner vent. Vent not included. Applicable Models: Right Hand Drive MK6 Golf R

    Regular Price: $594.00

    Special Price $534.60

  3. VW Golf MK7 R - iPE Valvetronic Catback Exhaust System VW Golf MK7 R - iPE Valvetronic Catback Exhaust System
    Sale

    VW Golf MK7 R - iPE Valvetronic Catback Exhaust System

    iPE Innotech revolutionizes the Hot-Hatch-Segment with an exhaust system completely made from stainless steel, for the new VW Golf R MK7.

    This extremely durable, performance increasing and valve-controlled system brings your new Golf R more than only an exclusive touch.

    Our premium-class exhaust system has larger pipes in diameter and an optimized exhaust flow, leading to more performance and improved torque and response.

    The system comes standard with chrome silver tips. Different colour tips are available from the drop-down menu.

    Please note if you have an MK7.5 Golf R - The link pipe to the muffler is different to the MK7 Golf R. 

    Regular Price: $4,716.00

    Special Price $4,008.60

  4. IPE - Volkswagen Golf R (Mk7) Catback Exhaust System IPE - Volkswagen Golf R (Mk7) Catback Exhaust System
    Sale

    IPE - Volkswagen Golf R (Mk7) Catback Exhaust System

    DESCRIPTION

    1.Improper adjustments made during installation may result in short-term to permanent damages to the iPE exhaust system and/or your vehicle.

    iPE will not be held responsible for any damages to the vehicle, and warranties on our products will be voided if the damages occurred due to improper installation.If you have any trouble installing the system please contact your authorized dealer!



    2. The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any other damages caused by improper installation or operation of the iPE exhaust system. When installing the iPE exhaust system be careful that the exhaust system does not touch other parts sensitive to high temperature.



    3. iPE makes no representation or warranties with regard to damage caused by the improper installation, use and maintenance of the iPE exhaust system. The warranty is limited to defects recognized by our technical department and of normal use only, and excludes items subject to normal wear and tear(gaskets and damping wool). The warranty is voided in case of accidents, modifications, improper or competition uses.



    *Actual product may vary due to product enhancement. iPE reserves the right to revise, change, explain the product.

    *Cat Pipe/Cat-bypass Pipe ONLY fit with iPE Catback System

    Regular Price: $5,499.00

    Special Price $4,674.15

  5. H&R Sport Springs - Volkswagen Golf R WAGON (MK7) (MK7.5)

    H&R Sport Springs - Volkswagen Golf R Wagon (MK7) Sport Spring kits are H&R’s number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle’s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. H&R Special Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All H&R springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. H&R Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving H&R’s ISO9001 certified production facility in Germany. Features: Lowers the center of gravity Reduces body roll Reduces wheel gap Lower wind resistance Front Drop: 25mm Rear Drop: 25mm
    $605.00
  6. IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release
    Sale

    IE FDS Intercooler for 2.0T & 1.8T Gen 3 MQB | Fits VW MK7/MK7.5 Golf R, GTI, Golf & Audi 8V A3, S3 - 2021 Release

    When you begin modifying your VW MK7/Audi MK3 Golf R, GTI, A3, or S3 it will become necessary to upgrade the intercooler. Once upgrades such as ECU tuning, exhaust systems, and turbo upgrades are introduced, intake air temperatures begin to rise, resulting in massive power loss.

    Regular Price: $1,899.00

    Special Price $1,729.00

  7. IE MQB VW MK7, Mk7.5 Golf R & Audi A3, S3, TT, TTS Performance Cast Downpipe (AWD) IE MQB VW MK7, Mk7.5 Golf R & Audi A3, S3, TT, TTS Performance Cast Downpipe (AWD)
    Sale

    IE MQB VW MK7, Mk7.5 Golf R & Audi A3, S3, TT, TTS Performance Cast Downpipe (AWD)

    • Proven performance gains for Stage 2 power levels

     • 76mm (3 inch) tubing replaces restrictive 60mm factory tubing

     • Bolt on fitment - no hassle or poorly fitting parts when you choose IE

     • Constructed of 304 stainless long-lasting and high-quality material

     • Thick turbo flange - prevents leaks and warping

     • High flow 200 cell catalytic converter - full power with reduced pollution and smell

    • Metal matrix catalytic structure -

     • OEM style flex section - allows for more adjustment and won’t fail

     • All inclusive kit - downpipe, midpipes, all hardware

     • TIG welded construction - equates to long lasting welds that are less likely to fail

    Regular Price: $1,699.00

    Special Price $1,574.95

  8. IE MQB 2.0T/1.8T Gen 3 Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3 IE MQB 2.0T/1.8T Gen 3 Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3
    Sale

    IE MQB 2.0T/1.8T Gen 3 Cold Air Intake | 2020 Release V2 | VW MK7 GTI, Golf R, Golf, & Audi 8V A3, S3

    LEADING FEATURES

    • Gain over 10+ horsepower and torque with tuning
    • Available with optional high gloss carbon fiber lid
    • Adds aggressive motorsport turbo and engine sound
    • Full-width air inlet spans entire radiator support
    • High-flow built in velocity stack & 5″ air filter
    • 3.5″ turbo inlet pipe and silicone – removes factory restrictions
    • Flow-optimized for tuned engines, hybrid turbos, and big turbo kits
    • Through-flow flat surface 3-ply couplers
    • Perfect fitment by utilizing factory airbox mounts
    • Black powder coated inlet pipe and heat shield
    • Stealth coolant line included at no extra cost
    • Works with/without SAI – no need to buy an extra kit

    PRODUCT DETAILS

    We were uncompromising in our quest to build the ultimate cold-air intake, the one we wanted for our own cars. Here’s why you’ll love it too:

    POWER GAINS


    On turbo engines more flow equals more power! Putting performance first, the ram air design, velocity stack, 3.5″ inlet pipe, and massive 5-inch filter all function to deliver the most power possible from an intake system. This Intake design delivers a massive flow increase over the stock air box, resulting in over 10 horsepower and torque over stock and far exceeds this on hybrid or large turbo setups.

    IE MK7 intake velocity stack
    IE MK7 intake modular design

    MODULAR DESIGN


    At the base of our intake is an alloy heat shield that spans the entire front of the car for maximum fresh air flow, seals off hot engine bay air, and securely holds the velocity stack and air filter. The modular design allows for an optional carbon fiber lid to be installed further sealing off the intake from radiant engine heat and provides a high-end gloss carbon finish to your engine bay.

    PERFECT FITMENT & APPEARANCE


    IE engineers utilize cutting edge 3D scanners and specialized software to create a digital model of the engine bay. This digital environment ensures the intake clears and fits exactly like a factory-installed unit. Rapid printed prototypes are then used to ensure fitment in actual vehicles before moving onto production. The result is an intake that provides a hassle-free install with angles and curves that not only look at home in your engine bay, but elevates the style completely.

    IE MK7 intake development
    IE MK7 intake easy install

    FULLY INCLUSIVE KIT


    Everything needed to install your new IE intake is included without having to make any trips to the hardware store or purchase additional add-on kits. Included is our stealth coolant line, which completely hides under the intake and out of view. This protects the coolant line from interfering or rubbing on anything that may lead to future coolant leaks. For vehicles equipped with secondary air injection (SAI) the IE intake is equipped to connect to the factory line without having to purchase an additional kit. Don’t have SAI? No worries, a plug is also included.

    MOTORSPORT PERFORMANCE & SOUND


    Delivering cooler air and in enough volume is a must for making power. To accomplish a ram-air design, our engineers utilize large piping and a velocity stack to efficiently deliver as much air as possible. We know a fast car is fun to drive, but a good sounding one really puts a smile on your face. The high-velocity bellmouth and free flow design of our intake also produces the exciting side effect of amplifying engine notes and turbo sounds that create a unique experience every time you push the the throttle down.

    IE MK7 intake golf R

    VEHICLE FITMENT GUIDE

    MAKE MODEL YEAR ENGINE(S)

    VW

    GTI

    MK7-MK7.5 2015-2019

    2.0T

    VW

    Golf R

    MK7-MK7.5 2015-2019

    2.0T

    VW

    Golf

    MK7-MK7.5 2015-2019

    2.0T & 1.8T

    VW

    GLI

    MK7 2019

    2.0T

    VW

    Golf Alltrak

    MK7-MK7.5 2015-2019

    2.0T & 1.8T

    Audi

    A3

    8V 2015-2019

    2.0T & 1.8T

    Audi

    S3

    8V 2015-2019

    2.0T

    Regular Price: $799.00

    Special Price $739.95

  9. IE Turbo Outlet Muffler Delete for VW MK7/MK7.5 & Audi 8V/8S 2.0T Engines

    Audi - A3 & S3 (8V & 8S) - EA888 Gen 3 - 1.8 TFSI and 2.0 TFSI VW - Golf / GTI / R (MK7 & MK7.5) - EA888 Gen 3 - 1.8 TSI and 2.0 TSI
Set Descending Direction

   

Items 21 to 30 of 42 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5