SHIFT FASTER, DRIVE FASTER
The IE DSG Tune for your VW MK6 GTI, Jetta, GLI, or Audi 8J TTS 2.0T delivers increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and additional transmission performance features when paired with a matching ECU tune. Acceleration times will greatly improve turning your tuned 2.0T TSI into a fully rounded performance monster.
LEADING FEATURES
Lightning fast gear shifts
Higher shift points of 6800 RPM
Kick down in manual mode eliminated
Lag time reduced when starting off in first gear
Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000
Drive shift mapping entirely reworked with an enthusiast in mind
Flashed directly through OBD-II Port (No TCU removal required)
Works flawlessly with an IE ECU tune
Increased clutch pressure on tap for higher torque without slip
Temperature protection remains for safety
Gear hunting reduced
Gearbox “Torque Limiters” removed
WHAT DOES A DSG TRANSMISSION TUNE DO?
The IE DSG Tune for the MK6 2.0T TSI has been carefully set up to make the car way more fun to drive. It completely reworks the shift point mapping in both drive and sport. The transmission will no longer lug the engine in drive mode. Clutch clamping forces are increased so the transmission can safely handle much more power. Shifts are much, much faster taking time directly off the 0-60 and ¼ mile times.
ONE TUNE FOR ALL STAGES
IE’s TCU/DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset. A great deal of sportiness is added from the tune while maintaining factory smoothness and driveability. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve from faster shifting. DSG tune requires a matching ECU Tune, do not install on stock ECU tunes.
USER ADJUSTABLE LAUNCH CONTROL
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
Available Launch Control RPMs:
3200 RPM
3400 RPM
3600 RPM
3800 RPM
4000 RPM
IE DSG TUNE TECHNICAL FEATURES
HIGHER SHIFT POINTS
Utilize the whole powerband of your 2.0 TSI engine without the DSG interfering and shifting early.
DRIVE MAPPING REWORKED
The MK6 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.
INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.
FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.
TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.
MULTIPLE LAUNCH RPMS
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!
KICK DOWN REMOVED IN TIPTRONIC/MANUAL MODE
The kick down switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain
FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI engine and transmission.
VEHICLE FITMENT
VW - MK6 GTI 2010-2014 (MK6) 2.0T EA888 Gen1/2 TSI engines
VW - MK6 Jetta 2011-2013.5 (MK6) 2.0T EA888 Gen1/2 TSI engines*
VW - MK6 GLI 2011-2013.5 (MK6) 2.0T EA888 Gen 1/2 TSI engines*
AUDI - TTS 2008-2015 (8J) 2.0T TFSI EA113 engines
*This DSG calibration is for 2.0T TSI EA888 Gen 1 & 2 engines only. Many Jetta and GLI models are equipped with a new engine variation (EA888 Gen 3) after 2013.5 and later. This tune does NOT support Gen 3 model engine TCUs. Please verify if your engine is an EA888 Gen 1/2 2.0T TSI or EA888 Gen 3 2.0T TSI tune before ordering.
IE DSG tunes are available only for vehicles equipped with 6 speed DSG (DQ250) transmissions. Does not function with manual 6-speed transmission cars.
IE ECU Stages for your Audi B9 engine are available for stock (Stage 1) or with modified hardware for Stage 2. Read below to determine the best stage for your build!
In order to flash your vehicle, you will need an IE POWERlink Direct-port Flash Tool (sold separately) and a Windows 7+ powered laptop. Already own an IE POWERlink cable? Contact us to purchase upgrade credits, there is no fee to upgrade tunes and you only pay the difference in tune cost.
Follow the link provided with your IE POWERlink Flash Tool to download our Flash Wizard software and follow the on-screen directions to tune your Audi in a matter of minutes!
WHAT DOES THE IE AUDI B9 ECU TUNE DO?
Your ECU (Engine Control Module) is a computer loaded with maps to control the operating conditions of your Audi 2.0T engine. The factory calibration is designed to function with stock installed hardware, meet new car regulated standards, and de-powered to not compete with higher performance models. IE's motorsport recalibration brings your engine to life by unleashing its full performance potential on stock hardware or to match your installed hardware upgrades while maintaining reliability and factory-like comfort. This is how your turbocharged Audi should have felt from the factory!
AVAILABLE AUDI 2.0T STAGES
The IE Stage 1 Audi B9 A4 or A5 TSI tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware or to get the most out of your installed intake and intercooler. In a matter of minutes, your new ECU Tune will deliver a massive boost in performance.
Stage 1 recommended hardware -IE Cold Air Intake -IE Intercooler
Looking to maximize the performance of your stock engine and turbo? IE Stage 2 Upgrade fine-tunes the ECU to match installed aftermarket hardware allowing the turbocharger to breath free and improve power gains across the powerband. This is the maximum power available from a stock turbo car.
Required to flash your tune, The IE POWERlink cable gives you control to unlock your engine’s true potential from your own garage or driveway. Quickly reflash your B9 Audi with your choice of ECU Stage through the cars OBD-II port. Upgrade tune stages to match installed hardware, take advantage of different fuel octanes, flash to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via data-logging.
VEHICLE FITMENT
Audi - B9 A4 Quattro 2016+ with 2.0T engine*
Audi - B9 A5 Quattro 2016+ with 2.0T engine*
Audi - B9 A4 Quattro Allroad 2017+ with 2.0T engine*
*For all wheel drive (Quattro) vehicles only, does not support front wheel drive engines at this time.
MK7 Golf/GTI/Golf R (up to production date Sept 27, 2015)
8V Audi A3/S3 (up to production date Sept 27, 2015)
MK3 Audi TT/TT-S (up to production date Sept 27, 2015)
T304 Seamless Stainless Steel tubing
-T304 Stainless Steel flanges
-100% TIG Welded
-T304 Stainless Steel 02 bung
-Torca Accuseal Stainless Steel Clamps
-Great Sound even with factory exhaust, no drone!!
To ensure the best performance and operation, proper tuning software must be used (Stage 2 software from most large tuning companies is compatible).
**Comes with tubular crash bar to fit Australian spec cars**
Description
CTS Turbo is proud to announce our Direct fit FMIC for the 8V RS3/TTRS 2.5T EVO.
The OEM intercooler delivers underwhelming performance, this platform benefits greatly from an intercooler upgrade. Vehicles at stock boost levels, and especially on tuned cars will all see a large improvement over the factory equipped hardware.
This giant intercooler core is 42% larger than stock and meets our extensive quality control and pressure testing (up to 50psi). Cast aluminum end tanks attach to factory hoses seamlessly to ensure a boost-leak free fit that results in increased horsepower and torque.
Stock FMIC size: 6.3 tall x 25.3 wide x 3.2 thick = 510.05 in3
CTS FMIC size: 10.4 tall x 24 wide x 3.5 thick = 873.60 in3
Features:
Efficient bar and plate construction
Internal air-directing fins provide smooth flow and minimize pressure drop
CTS Turbo is proud to announce our proprietary high-flow downpipe for 2018+ Audi 8V RS3/8S TTRS with 2.5L TFSI EVO (EA855) engine.
This stainless steel high-flow downpipe that allows the user to remove the restrictive factory "main catalytic converters". This downpipe is a part of our modular exhaust system and it is compatible with factory or CTS Turbo mid-pipes.
We used CAD simulation to streamline the flow of exhaust gasses and ensure that it splits evenly into two outlets. Many hours of R&D were spent to ensure perfect fit, smooth exhaust flow and excellent sound.
Features:
Large 3.5" downpipe outlet splitting into dual 2.5" pipes
Durable 304 food-grade stainless steel
Laser cut flanges and precision machined v-band
Factory-like placement of O2 sensors
Designed using the latest 3D scanning technology
Exhaust flow simulated with CAD software to ensure optimal flow routing
Perfect fit with factory or aftermarket mid-pipes
Aggressive sound - really makes that 2.5T scream
No drone under normal driving conditions
Optional driveshaft removal tool (based on factory Audi tool, required to remove and install driveshaft)
Fitment:
2018+ Audi RS3 2.5T EVO (EA855)
2018+ Audi TTRS 2.5T EVO (EA855)
Note:
Check Engine Light will come on after the installation; we strongly recommend using "stage 2" software because the CEL deletes/emulators are not compatible with these cars.
DESCRIPTION
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW GTI, MK7.5 VW Golf R, MK7 VW GLI and 8V.2 Audi S3. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powdercoat finish
For 7-speed DSG/S-tronic transmissions only
Compatible with factory and upgraded turbos
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercoolers
Parts Included:
Upper turbo outlet silicon
Lower turbo outlet pipe
2 clamps
Installation hardware
Fitment:
2018+ VW Golf R DSG 7-speed
2019+ VW GLI DSG 7-speed
2019+ VW GTI DSG 7-speed
2018+ Audi A3 S-Tronic 7-speed
2018+ Audi S3 S-Tronic 7-speed
2018+ Audi TT, TT-S S-Tronic 7-speed
NOT COMPATIBLE WITH 6-SPEED DSG, AUTOMATIC or MANUAL TRANSMISSION MODELS, SEE CTS-IT-275